Similar Questions

• My mini iPad on IOS 9.3.5 and says that the software is up-to-date.  I would like to install IOS 10

  My iPad on IOS 9.3.5 and says that the software is up-to-date.  I would like to install IOS 10, is it possible?

  What exact model of the mini iPad do you have?

  You can go to settings-> general->-> model about and post it here.

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is

  Help, please? I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is corrupted. Help please! I'm paralyzed!

  [Double question deleted... it is an open forum for other users (sometimes Adobe) answer, not Adobe support...] MOD]

  The best option would be to contact the technical support that can remote into your machine & troubleshoot it. Contact the customer service

  Concerning

  Stéphane

• Lightroom CC Trying ├a import 'New' Photos and they are greyed out and say that they have already been imported, how to make their importation?

  Upgraded to Lightroom CC a few months ago and have had major problems with importation, never had any problems before. Since the upgrade I import a map is fine, next card says pictures have already been imported and that they are grayed out. I know for a fact that I matter not yet. So frustrating! Someone please help! I even turned off the 'don't do not import suspected duplicates' box and again, it will not let add me or COPY. I will attach a screenshot.

  Yes, I went straight from my card. I always did it that way. Not until the upgrade did I start having issues. I ended up having to download hard disk, rename and then import it. Quite unfortunate that they changed this in the upgrade, it was nice not having to move in all directions and could go straight to LR. Thank you very much for the help!

• Someone call me and say that it is Micrsoft, the phone number is 21-299-9365, they ask me to turn on my computer. Who is this & can you help me?

  Help: under the title above is the problem, but I will type it again.  Someone was to call me and say it's Microsoft. Their phone number is displayed on my identification of the appellant as 21-299-9365, as soon as I answer they tell me to turn on my computer that Im problems.  Who is this and can you help me?.  I bought a new computer a few years ago and have a different email.  the old email was.  TWC purchased a preview so I can no longer use the e-mail.   Thank you I can not write my email to you, according to you, note.

  It is a scam to get personal information on your behalf hang up on these people.
   
  It's a real call from Microsoft?
  http://www.ComputerActive.co.UK/CA/PC-help/2134917/genuine-Microsoft 
   
  Avoid scams to phone for tech support
  http://www.Microsoft.com/en-GB/security/online-privacy/avoid-phone-scams.aspx
   
  Do not fall for phony phone technical support
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx
   
  Aggressive, persistent Windows tech support fraudsters continue to track consumers
  http://www.Computerworld.com/s/article/9248122/Aggressive_persistent_Windows_tech_support_scammers_continue_to_stalk_consumers

   

• Microsoft Visual C++ 2005 Redistributable and says that the component you are trying to use is on an unavailable network resource

  Vcredist.msi
  I have Windows XP and just upgraded my Zone Alarm Internet Security Suite to the new version. The parental control available in it says they are available but not installed. I click on install and a window will appear titled Microsoft Visual C++ 2005 Redistributable and says the component you are trying to use is on a network unavailable resource. I need help to understand this.

  Hi brianr30,

  I suggest that you download the latest version of the Microsoft Visual C++ Runtime manually and check to see if it helps.

  How to get the Visual C++ 6.0 runtime components

  http://support.Microsoft.com/kb/259403

  If you're still having problems, then you will need to contact ZoneAlarm support for assistance.

  https://support.ZoneAlarm.com/

• My wifi laptop Windows 8 guard out and say that it is "limited".

  I've seen a number of tickets associated with this issue, so in a way I'm glad I'm not the only one.

  I recently bought a new laptop and it came with windows 8 is installed. It is the only device/machine that is struggling to keep a stable internet connection.
  Under power options, I have wifi at maximum performance.
  I tried to adjust my wifi for 'meter' because I heard rumors that would fix everything.
  Also, I tried to update my card wifi drivers. They were already up to date.
  I uninstalled Norton Internet Security and restarted. Still not good.
  It happens on my work and the network.
  It's very annoying. If the cuts internet to every 2-10 minutes, then it is impossible to play a competitive game. I can always just reconnect to the network, but it's awkward to do.

  So the model number is a Samsung, NP680z5e (NP680z5e-x01us)

  I found the problem. There is an another wireless driver update which can be found in the sw update. It is not sound obvious that you need this driver update and if you never open sw update then you will never find the solution. Such a jump big bug.
  In the past I had updated only the drivers through the Device Manager.
  The link you posted does not help. I tried almost everything. I hope this helps someone else. Apparently this model has been ever been tested for more than 10 minutes after everything has been completely assembled out of the factory. There are layers and layers of drivers and settings to regulate your, half-light of map and graphic display. If you miss a layer, then things do behave as expected.

• Windows Update runs every time you start and says that "some updates failed"

  My computer wants to update each time after starting upwards.

  When I let it run at the end of the update that always, I get this:

  "Some updates failed"

  Microsoft. NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server, 2008 x 86 (KB2657424)

  Try to connect to windows update manually, choose the "custom" button

  Let it scan, perform updates.

  Also, the update update update to "Microsoft update".

  It is an upgrade for xp.

• I have the options set to enable cookies and accept each other. Hoswever, when I run Firefox, it continues to come and say that cookies are disable?

  I followed the instructions on how to enable cookies. However, it doesn't seem to work as I continue to get the message that cookies are not enabled?

  Hello, please go through these steps: Web sites say cookies are blocked - pledge

• ALL THE ICONS ARE MISSING IN THE OLD AND THE NEW BOOKMARKS... Help! WIN XP FF 15

  Not only did I lose all bookmarks in the last 5 days, something happened where ALL old bookmarks - and those that I added today are all missing icons.

  The 'old' were in a json file which was a backup. When back FF-no more icons! I tried to make an HTML version of the JSON file, but it has a MOZILLA icon on it and it does not work when I try to use it.

  All they have is a white square dotted autour.

  All NEW bookmarks have NO icons... I don't understand.

  I have WIN XP and Firefox 15.

  I'm NOT techie so any solution please be simple and progressive.

  Is it you LIKE IT IS possible to fix this?

  THXXX

  First of all, make sure that you have bookmarks you make backups and put somewhere safe outside the paths of Firefox (the Windows desktop will do for now) in fact I strongly advice you go further and save the profile Firefox everything at once. See

  • Backup and restore Firefox profiles information
  • Restore backup bookmarks or move them to another computer

  The immediate priority is securing all bookmarks that you have. It is important to realize that restore bookmarks wiped out existing bookmarks stored internally, and that internal backups of Firefox can cover only a few days.

  You can see the icons come if when you visit a site to bookmark, you click first to unbookmark star and then new bookmark. This isn't a good workaround solution, but at least he is safe and not endanger all bookmarks stored.

  Make backups, then we will try more far from solving the problem of the missing icons.

• When I came out of hibernation, a window appears saying that Windows is not genuine

  Windows not genuine message?

  I have a ZT Systems Core i7 PC with Win7 Home Premium 64-bit. It's about a year, but recently, when I came out of hibernation, a window appears saying that Windows is not genuine.  When I close and re - enter my ID in the Properties window, it checks and says that the activation is successful.  Why this message keep appearing from time to time and how do I get rid of him?  Thank you!

  A product id is not a product key. your product key is on your COA attached to your computer. (if your laptop, it may be in the battery compartment).

  MGA Diagnostic Report:

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message. (please do not change the report.)

  Please indicate the version and edition of windows from your COA. do not specify the product key from the COA.

  One issue per thread:

  Activation and Validation issues more look the same on the surface, but can have many different causes and bugs. This is why we ask a diagnostic report and it is also why we are asking that you create your own thread for your question (in other words, do not post your question in another thread).

  It is simply too complicated to try to resolve the multiple problems in the same thread.

  How to post in your own thread

  http://answers.Microsoft.com/en-us/page/FAQ#faqGettingAnswers5

• Refresh wiped out all the bookmark and browser settings

  Firefox suggested I do a Refresh to speed up the browser etc. I did it and everything has been wiped out. Firefox logo appears in the start bar but when I click on it see no firefox browser, totally empty tabs. All the bookmarks wiped out all three browsers I use: Firefox, Google Chrome and Internet Explorer. I'm totally in trouble.

  When you reset Firefox and a new profile is created and some personal data (bookmarks, history, cookies, passwords, data form) are automatically imported and the current profile folder will be moved on the desktop to a folder "Old data Firefox".
  Installed extensions and other customizations (toolbars, Pref.) that you have made are lost and must be redone.

  It is possible to retrieve the data from the old profile, but be careful not to copy the files corrupted to avoid transporting more problems.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• My mind is wiped out. I'll put up pages in Photoshop 9.0 to be then placed in InDesign 4.0 for professional printing. Can you help me configure the proper color settings, and what PDF preset to use. And output parameters, etc. Thanx.

  My mind is wiped out. I'll implement the color pages in Photoshop 9.0 to be then placed in InDesign 4.0 for commercial printing in book form. Can you help me with the settings of color in Photoshop, that is to incorporate the color profile; convert in space work, Adobe RGB, etc. and which PDF preset to use, i.e. printing, PDF / X - 1 or 3, etc. Also, what I have to select the output settings such as the conversion of colors with the Destination or the printer deals with that. I know I asked a lot, so thanks in advance for any input or advice.

  Best regards, ScottyB34

  What are the settings of your printer wants? Some may deal with sRGB some want Adobe RGB Ctrl/Cmd-Shift-k in Photoshop, then choose North Amercian prepress 2

  He'll take care of the tags for you, or if sRGB is important, Norh American General Purpose 2.

  Here is a summary of the settings PDF and their meaning:

  When you are ready to create a PDF file from an application such as Illustrator or InDesign Adobe, we give you a list of the predefined PDF settings from which to choose. Well how do you decide which is the right choice? Well, let me explain what they do.

  Let's start with the smallest file size and the name of the type of the story. It is compatible with Acrobat 6, which means that anyone who has Reader or Acrobat 6 or above will be able to open the file. Now it converts everything in sRGB color which is a common space for color monitor.

  All RGB is truncated to sRGB, CMYK and spot colors also. So that means if you have a job to print, you can see some color shifts in this outgoing PDF. You must decide whether it is acceptable. He can't stand live transparency, not flattened. It downsize image content to 100 pixels per inch and this is part of how she made a reduced file size. It also uses aggressive JPEG compression of poor quality on the content of the image. So, you can see some of these rectangular JPEG artifacts.

  But it is how it gives you a reduced file size, and results are appropriate to be posted online or attached to an email.

  High quality printing has compatibility with Acrobat 5 and above. There is no color conversion. RGB RGB stays, rest spot, stays of CMYK CMYK spot and it supports live, not flattened transparency. It does not perform some downsampling to 300 pixels per inch. So, for example, if you placed an image which was 300 ppi and then set to scale up to 50 percent there actually a res then 600 pixels per inch.

  Well, this process would take half out these pixels. Therefore, it can create larger files but that makes it suitable for in the House of printing or sending Let's say a remote office if they want to print we tell cells leaves, or brochures, or something like. It's beautiful out on an internal printer.

  Print quality and high quality printing have similar names, so this may be a bit confusing, but print quality has compatibility with Acrobat 5 or higher. It converts the content of RGB to CMYK destination values according to what you specify as the destination.

  It is usually SWOP, S-W-O-p. It supports live, not flattened transparency. It performs the subsampling bicubic to 300 pixels per inch and because that it keeps at least 300 pixels per inch, which means that it can create some large files, but it is suitable for professional printing.

  Then we start to get into the presets named 'X '. 'X' is now for Exchange. They agree on specifications and the idea is to have a set of specifications if a PDF file is compliant to these specifications, we know it's going to be printable.

  We know that imaging devices are going to treat them properly. So this goes back to 2001, and which can seem a bit old, but bear with me. PDF/X-1 has a compatibility with Acrobat 4. I know, it sounds old. It converts RGB to CMYK content, it keeps the content of good tones. It flattens transparency. Downsize it at 300 pixels per inch. It can large enough crat files if you have large size images in your project and that it is suitable for professional printing.

  The idea behind X-1 is if you send a PDF file to an unknown printer, you do not know what are their capabilities, you send abroad, it will be able to be photographed on any device. No matter the age, it is, they can print. Over the years, the concepts of Exchange became more sophisticated the workflow and devices become more sophisticated.

  SP PDF / X-3: 2002, remains compatible with Acrobat 4 and that means that it flattens transparency, but it does not perform any color conversion.

  This means that it maintains RGB content, place remains in place, rest of CMYK CMYK. He still performed bicubic downsampling at 300 pixels per inch, and therefore, it can create large files. But this is suitable for commercial printing, if the printer signals you that it is present RGB content is correct.

  PDF / X-4: 2008 is compatible with Acrobat 7 and later. See, we're getting more modern. No color conversion. RGB RGB stays, stays CMYK CMYK, spot rest spot and it supports live, not flattened transparency.

  He still performs bicubic downsampling. Therefore, it can create large files because it maintains the pieces of the image to 300 pixels per inch or higher and it is suitable for commercial printing, as long as the printer tells you that RGB content is not serious and dynamic transparency is acceptable. Some older workflow does not support dynamic transparency, or they treat well, and that's why always ask. It is a special case in Illustrator, something called default Illustrator. Its compatibility is Acrobat 6 or higher.

  It does not perform the color conversion, everything continues like this. It supports transparency live, not flattened, and it also contains the original, editable Illustrator file in the PDF file. It preserves layers and it may be return, can be reopened safely in Illustrator and it's really the only PDF format you can do with safely. But it can create larger files, because you sort of two files for the price of one, they sometimes get huge.

  So what predefined PDF is Right For You? Well, if you want to send for printing, the first thing you should do is to ask your printer how they want the created PDF.

  They should be able to give you the plug for the creation of the PDF file. They may be able to give you job options files you can simply import and use as your preset target. But if it's a stranger the printer or the printer for some reason any said, well, I don't know, just make a PDF and this happens, well, choose the lowest common denominator to the PDF/X-1 test. Anyone can image that. If it is a more modern printer and up to date, especially if you send it to someone who uses digital presses, PDF/X-4 should be safe.

  I always go back to point one, ask the printer. If you send it as an attachment or you're going to post online, well, smaller size of file is a pretty clear choice. But remember this, you can start with one of these predefined parameters, and you can always edit it to customize your specific needs. So get to know the presets, understand the destiny of the PDF you create, and then make the best PDF that you can.

• Hi my drive hard hole was wiped out had to reinstall windows 7 from scratch all my bookmarks and history went help please.

  as above

  Hi jscher2000 I will be sync all now on
  Thank you very much for your help soon has g w.