Your computer cannot connect to the remote computer

Similar Questions

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• your computer cannot connect to the remote computer because the Office gateway servers Remote certificate has expired or has been revoked

  Hi guys,.

  Im getting this error or on a server I don't have physical access to, how can I get this client of the RPD to ignore this error?

  Hello

  Please ask your question in the forums TechNet for assistance:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=winserverTS

• Unable to connect to the remote computer

  Hello

  I work in an organization. I set up VPN in my computer and when I try to access a remote server, it comes with the following error:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  1. remote access to the server is not enabled

  2. the remote computer is disabled

  3. the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I connected several times using my computer. I had no problem. But suddenly am facing it.

  I also tried another computer and I was able to connect without any problems.

  When connected to the VPN, am able to ping the server name and IP. Am also able to connect to shared folders (\\COMPUTERNAME). But I am not able to connect to the desktop remotely using DRC (mstsc).

  Help, please!

  Thank you.

  Vignesh.

  Hello

  Thanks for posting your query in Microsoft Community.

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• This computer can't connect to the remote computer

  I have a Windows server 2003, and I am unable to distance on the server. The error message I get is 'this computer cannot connect to the remote computer.

  • I did a netstat - year to see if port 3389 is listening, does not see an entry for the port. I have
  • I checked the services and that they perform a remote procedure call (RPC)
  • Restarted the server several times.

  I can remote into other servers of this machine if I log in locally.

  Please advise,

  Michael McDaniel

  301-763-1160 off.

  Have you checked the firewall? Could be a firewall anti-virus that keeps you from log, as that happened to someone else on this forum recently.

• invoke VMScript unable to connect to the remote server

  I have two PCs, two win 7 x 64. PC1 has powercli 5.5 build 3142196 (5.5u2?) and the other who has now updated 6.0.0.7857 (last AFAIK) via VMware PowerCLI - 6.0.0 - 3205540.exe from the downloads section.

  On PC1, I can run the script

  invoke vmscript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vmware * "'-ToolsWaitSecs 45 - VM VMName - guestuser guestacct - guestpassword blablabla".

  and it works very well and gives me a result.

  If I run the same command on PC1, I get the error:

  Invoke-VMScript: 16/11/2015-18:32:01 VMScript Invoke cannot connect to the remote server

  on line: 1 char: 1

  + Call VMScript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vm...»

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [invoking-VMScript], ViError)

  + FullyQualifiedErrorId: Client20_VmGuestServiceImpl_DownloadFileFromGuest_DownloadError, VMware.VimAutomation.ViCore.Cmdlets.Commands.InvokeVmScript

  Anyone encountered this before? I see no difference in the PC it would cause and I wonder if there are logs, etc. for troubleshooting, I'm not aware of. The message is a bit lacking in detail. Probably the client must connect something.

  Thank you!

  The client when you run the Invoke-VMScript cmdlet on must actually be able to connect to the physical ESXi host on which the virtual computer runs on port 443. Are two clients on the same subnet, you have a firewall between the hosts and guests? Just try to open the ESXi host welcome page in a browser from these two clients, e.g. https://myesxihost.local/

• You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

  Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

  Karima,

  Applicable to Windows 7.

  The following steps require administrator credentials.

  • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
  • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

  Good luck.

  James

• Remote Desktop is enabled on my computer, but I cannot connect to it remotely.

  original title: Remote Desktop

  conectivity remote desktop is active, but I can't conect to my computer remotley

  conectivity remote desktop is active, but I can't conect to my computer remotley

  How to ask a question...

  http://support.Microsoft.com/kb/555375

  http://www.officeforlawyers.com/howask.htm

  *********************************************************

  Assuming that the host/server [DRC] remote desktop PC running Windows 7 Ultimate/Pro/Enterprise or Vista Ultimate/Pro/professional or XP Pro/MCE...

  RDC is enabled on the server/host DRC PC?

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  It's on your local network and if so you call by computer name or address LAN IP?

  If you cannot connect through the LAN using the name of the computer can connect using the host/server local DRC PC LAN IP?

  Can you ping the host DRC/server PC of the RDC client?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  Test it on your local network...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  If you can connect successfully on your local LAN but can't remember, from a remote location, you have TCP Port 3389 open on the firewall and/or router as the server/host DRC PC is behind. Call using the public IP address of the router or the server/host DRC if your connected directly to a modem. You must also assign the host/PC one DRC address static IP of the server so if you restart the server/host DRC PC it keep its local LAN IP. Do not do can ruin any port forwarding system through any router your behind.

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  If your on a remote site you are trying to connect to the host PC DRC/server through a VPN? If Yes can you ping the server/host DRC PC when you have the active VPN tunnel?

  What are the exact error messages, if any, that you get when you try to connect with the DRC compression?

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• "Error 720: a connection to the remote computer could not be established.

  Earlier, it was working fine. One day it stopped working. I don't write my windows key and the serial number of HP for reasons of confidentiality, but it is authentic.

  I use Windows 7 Home Premium on my laptop HP bought 4 months ago. While trying to connect to internet through my USB data card (I use Auntie Photon +) I get an error message "error 720: a connection to the remote computer could not be established. When I connect the same device to another laptop, it works fine. The USB card company suggests that it is a matter of TCP/IP and I need my OS resintall. I don't have any CD of windows with my HP laptop. I tried to restore my machine, but that did not help. Please help me.

  Hello

  Do the methods and check if this solves the problem.

  Method 1: Try to run the network troubleshooter, check the link for more information on the same.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method2: You can try the steps outlined in the article and check if this gives a probable solution.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Reset Internet Explorer WARNING:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• Error connecting to the remote computer.

  Hello

  I am able to connect to the VIRTUAL LAN, but when connecting to the remote computer using mstsc, I get the error below 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  Here are my details of machine:

  Name of the operating system Microsoft Windows 7 Home Basic
  Version 6.1.7601 Service Pack 1 Build 7601
  System model Inspiron N5010
  System Type x 64-based PC

  Antivirus:
  internet security Kaspersky 2012

  Please come back if you need furthur information.

  Could you please getback me ASAP.

  Thank you & best regards

  Anil.

  Hi Anil,

  You try to connect a Windows 7 Home Basic?

  You cannot use Remote Desktop connection to connect to computers that are running Windows 7 Starter Edition, Windows 7 Home Basic or Windows 7 Edition Home Premium.

  See the following Microsoft article.

  Remote Desktop connection: frequently asked questions

  Keep us updated on the status of the issue.

• How to connect to the remote computer

  Original title: how to goto the program installation and connection to the remote computer.

  Only school in priperly IAM.

  Hello

  Thanks for posting the request in Microsoft Community Forum.

  Please answer the question that helps us provide a better solution.

  What exactly are you trying to do?

  If you try to connect to the remote computer or if you allow someone to connect to your computer, visit the following links and check:

  Connect to another computer using Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  Allows a user to connect to your computer using Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  Hope this information helps. Please feel free to respond if you have any other questions, we would be happy to help.