Your version of obsolete Microsoft DLL components is not compatible with this version of Windows. What happens when I try to install marble run a free game for pc.

Similar Questions

• Your version of obsolete Microsoft DLL components is not compatible with this version of Windows.

  I ran the report of problems and Solution of control panel and I get an alert saying that ' Your version of obsolete Microsoft DLL components is not compatible with this version of Windows. "Does anyone know what this means and what to do to fix.

  I went to report problems and Solutions, because my PC started crashing about 10-15 minutes after the launch of Windows Media Center. I don't know if these two things are related.

  Any help or advice would be much appreciated.

  Thank you

  Hello PTLUK,

  I suggest you make the SFC scan.

  File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  e. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article:

  http://support.Microsoft.com/kb/929833

  Also take a look at the link that talks about the same question below:

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/895e0fcb-045b-4166-BFBB-bc302a26820b

  Kind regards

  Savan - Microsoft technical support.

• This is the message I got: your version of obsolete Microsoft DLL components is not compatible with this version of windows

  I'm currently running Vista Home Premium SP2 a 2 year old computer.  I loaded some software call professor teaches the basics of basic HTML and advanced.  It load on my computer very well and in fact I was at Midway through a program (this is an interactive format where it shows you examples, allows you to type in some information and shows you the result) and all of a sudden I got this message: this obsolete version of DLL Microsoft components is not compatible with this version of windows.  I clicked on the link that says I could check online with Microsoft to see if there are any patches, but she came back with nothing.   It does not work on XP.   Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Action Center message: "your version of Microsoft Deprecated DLL components is not compatible with this version of windows."

  Original title: obsolete Microsoft DLL components

  I get an error through the center of the Action: "your version of obsolete Microsoft DLL components is not compatible with this version of windows." I'm on windows 7.

  Piyush salvation,

  1. This occurs when you perform a specific task on your system?

  2. did you of recent changes on the system?

  This error seems to be related to Msvbvm50.exe or compatibility of applications with Windows 7.

  Method 1:

  You try to run a SFC scan on the computer that would be a system file corrupt on the computer search and replace.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  Method 2:

  You can also check the link wire and suggestions provided by Andre Da Costa, MVP on October 17, 2011.

  Why did I not this message, your version of obsolete Microsoft DLL components is not compatible with this version of Windows.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• I get a note telling me that my obsolete version of DLL Microsoft components is not compatible with this version of Windows. How to solve this problem?

  I recorded a CD on my C drive but I can't open it and I get the note above.

  Please tell us what to do and where I can get it as long as I can open the program?

  Hello

  1 are. what program you trying to install it using the files copied to the CD?

  2 did you change on your computer before the show?

  3. is the program you want to install compatible with Windows 7?

  Follow the steps mentioned below:

  Method 1:

  Check if the game software, program, is compatible with Windows 7

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Method 2: Start the computer in a clean boot, and then try to open the contents of your CD player clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

• Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  I installed programs:

  Software individual professor teaches Super Set

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Maintenance message: Microsoft obsolete component DLL is not compatible with this version of windows.

  I found a message in my "maintenance" section that says.  Obsolete Microsoft component DLL is not compatible with this version of windows.  What - what it means and what I can do about it?

  Hello NancyMcKinzie,

  Please see the thread here because it made reference to the issue you describe:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/why-do-i-have-this-message-your-version-of/5e73c806-a4e1-44a1-8063-13cf83e9e4e6

  Let us know if it helps.

  Marilyn

• Your version of Intel Active Management Technology is not compatible with this version of Windows. What does this mean?

  my pc is hp compaq dc 7800 small form factor.

  I installed win vista Business 64-bit

  After installition, I get this message

  "Your version of Intel Active Management Technology is not compatible with this version of Windows."

  What does this mean?

  Thank you

  Hello

  I suggest you send the question in this forum and check if it helps;

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup

  It will be useful.

• your version of sun java Scheduler is not compatible with this version of windows

  Whenever I turn on my computer this message comes up (your version of sun java Scheduler is not compatible with this version of windows). I went to the java website and they say that I have the latest version of java, and my computer is slow when you try to access some games that I play and require that I have java. I don't know if this is the problem or not but I would like to get this java thing fixed so it isn't pop up whenever I connect.

  Uninstall all versions of Java from your Control Panel programs and features.

  Turn it back on.

  Download and install the latest version here:
  http://Java.com/en/download/manual.jsp
  (I suggest the Windows 7, XP (32 bit) offline file size: 16.0 MB - save and run as administrator to install.)

• BlackBerry Hub your device is not compatible with this version

  Hello.

  I and BQ Aquaris X 5 with Android Marshmallow 6.0.1. I can't install the Blackberry Hub + and I get this message:

  "Your device is not compatible with this version.

  What is going on?

  Thank you!

  Thank you for your patience @mintsteven & @njw123

  Hub + is currently supported by smartphones that have 2 GB or more RAM, a density of screen between 420 and 640 dpi and have a version officially released Marshmallow 6 Android from the device manufacturer.

  Based on this each fo your devices do not meet the minimum requirements of the DPI (each of your devices has a DPI of 294)

• Could not complete your request because the file is not compatible with this version of Photoshop.

  Hi - I tried for a few days in order to reopen all file ive created with photoshop cs5 but ketting the same message "Could not complete your request because the file is not compatible with this version of Photoshop."

  the file is a psd file (just the regular photoshop save as an option) and the file in photoshop consisted of a quicktime movie file - which stood on a layer... (which I could rub through in the animation timeline) and a new layer video in which the individual frames, I drew some images with the brush.

  I can play the video with two video layers in ps cs5, but when I record and try to open I get the message "Could not complete your request because the file is not compatible with this version of Photoshop."

  I have no antivirus or norton... programs etc on my computer

  and ive tried to do this on a mac and a pc and get the same result.

  its crazy because im saving the file with the same im version tries to open it with.

  any help meet me would save a looming deadline.

  Thank you

  I noticed that the psd file is only about 10 MB, but the movie quitime file (as a stand-alone file - (before that I made in photoshop is 650 MB)) - is this a problem?

  Have you installed all the updates to Photoshop CS5? (the current version is 12.0.3)

• Your version of Citrix ICA is not compatible with this version of Windows.

  Original title: Contact Citrix Systems, Inc. for support__Your version of Citrix ICA is not compatible with this version of Windows. ___You are using Windows Vista SP1. __

  I'm trying to access a secure gateway.  I have installed the program but is does not seem compatible with vista.  What can I do?

  Go to http://www.citrix.com/ and download an updated of the Citrix ICA client package.

  "JBernardLaughton" wrote in the new message: * e-mail address is removed from the privacy... *

  I'm trying to access a secure gateway.  I have installed the program but is does not seem compatible with vista.  What can I do?

• Sony Handycam DCR-30 is not compatible with this version of Windows.

  Sony Handycam DCR-30 is not compatible with this version of Windows.
  Error message:

  Because this device is not compatible with this version of Windows, and there is no solution for this problem, we recommend that you find another device on the following Web site: Can can not solution on the Web site.

  Hello Nicolio,

  Thank you for your message.  Did you mean DCR-HC30?  If so, click HERE and select your operating system from the pull down.  You should be able to find the correct drivers from the Sony site.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• The information about the registered printer are not compatible with this version of Photoshop

  Hello

  I hope someone can help us. I'm a COMPUTER technician in a school, we have about 500 machines to Windows 7 64 bit with around 600/700 users - 200 machines have the CS5.5 Master Collection on which is installed. We have an intermittent problem with printing from Photoshop (32-bit and 64-bit versions). Our printers are for the most part, the (modern) HP LaserJet printers, but we have an inkjet Epson B-510DN and some copiers Xerox too. The drivers are all installed on a central print server running Server 2008 R2 and shared via the client computers group policy.

  In the rooms where Photoshop is installed, intermittently when a student goes to print, we will receive the following error message:

  Saved printer information are not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before you print.

  Photoshop will be gray and then the button "Print" and will not let the user print again. The strange thing is that we can still print from other software such as Microsoft Word or Microsoft software or even non - same Illustrator will print. It just seems to be Photoshop it's has all the problems.

  This occurs when you print to a printer on the site, 90% of whom are HP. As a general rule we set up all of our HP printers with HP PCL6 universal print driver because it facilitates the management of the various models of printers, and we did not limit ourselves atall yet. We are aware that the Adobe software is "preferential" for Postscript drivers, but aren't our printers, HP PCL is their mother tongue. We tried to change a printer for the Postscript UPD driver to test but he brought no improvement. We also saw the issue in depth altogether with our Epson B-510DN, which is configured with the newer model specific driver Epson as uses our photography service. As we see with different printers, I don't think the printer drivers are to blame - unless someone want to prove me wrong.

  Like I said the problem is intermittent, and we are having trouble tracing it down for a user, computer, or a software problem, as it is so intermittent. Has anyone another considering cela and managed to overcome? Given that it only happens in Photoshop is this a bug that Adobe have recognosed and fixed the CS6? The only solution we found that he must go in printer, change the default printer from one to the other and vice versa - cela seems to shut up Photoshop.

  Thank you, Dave.

  Here's the answer that I received from Adobe, and it worked.

  'Ok. Try to open 'print', while holding the space bar; He ignores all the saved values. "Also, make sure that the correct printer that he set as default.

• MDAC 2.8 RTM is not compatible with this version of Windows. All of its features are currently part of Windows__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  eliminating this problem

  MDAC 2.8 RTM is not compatible with this version of Windows. All of its features are currently part of Windows.