your video card or drivers are not compatible with media center

Similar Questions

• After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

  After a computor crash and the new hard drive, my disk drive does not work in media center "video card or drivers are not compatible with media center.

  Probably a matter of resolution: you will need to install the specific video drivers XP laptop computer PC manufacturer's Web site.

  See you soon,.
  Jerry

• XP Media Center says video card or drivers are not compatible

  Original title: Hi everyone__hope you can help me___

  I have xp media center edition 2005

  with a jury of hauppauge wintv-pvr

  When I opened MCE watching television he says video card or driver is not compatible with media Center

  I can't find the driver for it

  and do not have a video card that I know

  can someone help thaks

  Thanks for the info, rabjhop.
  As I suspected, the weak link is your graphics card integrated - GMA910GL of Intel is not enough juice (nor has it required WDDM WHQL certified drivers) to properly support DirectX (or a few other things) entirely in hardware (not on Vista or Win7.)  Even the GMA950 chip had problems in Media Center (go all the way back to Media Center 2005); the minimum that worked really really - still - is the GMA x 3000.
  In other words, you need a graphics card.  But you don't have to spend a lot of money - a PCIe card decent (assuming you have a PCIe x 16 location) can be made for<>

  I have not assumed that you could pop the cover off the PC and see what (if any) you have at disposal a graphic slot, could you?
  Here's what you're looking for:
  PCI Express: http://en.wikipedia.org/wiki/File:PCIExpress.jpg see the long slots?  Those who are 16 x.  No the difference (you can tell by the location of the key in the notch) to what follows.
  AGP slot: http://en.wikipedia.org/wiki/File:AGP_slot.jpg
  In the two photos, the mount is on your left.

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• rise of Nations pc game United gives an error: "could not initialize services make sure that your video card and drivers are compatible with the game.

  Hi, I recently installed rise of nations pc game but does not work because it says "could not initialize services make sure that your video card and drivers are compatible with the game. What should I do, how can I fix this to get the game to work.

  Hello

   
  1. What is the operating system installed on your computer?
  2. What is the brand and model of your computer?
   
  I suggest you to follow the links and check if it helps.
   
  Known graphics issues in Rise of Nations
   
  Card video known issues
  Known graphics issues in Rise of Nations: Rise of Legends

   

• Series Deskjet 1000 - J110 printer but drivers are not compatible with Mac OX 10.4.11

  I bought a Deskjet 1000 Printer series - J110 printer but drivers are not compatible with Mac OX 10.4.11, which is the mode of systemon my macbook. What can I do to solve the problem?

  I'm sorry, but you won't be able to use it with Mac OS 10.4, this model is supported by Mac OS 10.5.8 and above.

  Most of the latest models sold today is supported by 10.5 and above.

• Dell N5010 network adapter drivers are not compatible with windows 7 (32 bit)

  Hello

  I have laptop dell n5010, I installed windows 7 ultimate (32 bit). but the network drivers are not getting installed on this operating system. demand for the windows 7 or windows vista 64-bit. any solution to this problem?

  http://support.Dell.com/support/downloads/index.aspx?s=DHS&CS=19

  Go to Dell over the link for Windows 7, Drivers etc.

  If Dell does not have them, you're out of luck.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Age of Empires 2: Age of Kings does not work on Windows 7. The error is: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  I can't get my Age of Empires 2: Age of Kings drive on my computer.

  It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.

  Help, please!

  What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.

• Age of Empires II - "can't initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  Hello

  I have a problem of Age of Empires 2 running on my new computer. Keeps displaying the following error message: "cannot initialize the graphics system. Make sure that your video card and driver are compatible with DirectDraw. "Someone at - it solutions to this? I have already visited many forums and trying different solutions; None of them helped.

  Tried solutions: change the compatibility and as an administrator, switching to 16-bit color, turn off my graphics card, execution of the extension "nostartup" of the game, looking for old patches from Microsoft (which most are now unavailable due to the game being so old). I KNOW that others have been able to get this game to work on the Windows 7 operating system, but with a few other quirks and I KNOW my video card and driver are more than capable of handling this game. Any suggestions?

  System Specs:

  System manufacturer/model number Dell/Studio 540
  Operating system windows 7 home premium 32 bit
  6 GB of memory
  Graphics card ATI Radeon HD 4350
  Monitor (s) displays Reference Dell ST2410

  Thanks in advance,

  EP

  I had the above problem with AOEII:Age of the Kings. My brief spec is Windows 7 Ultimate edition (SP1) and a card nVidia 8600 GT. I did the following (make sure you reboot after each installation):

  Make sure that you are running the latest patch of AOEII:AOK (2. 0 a):

  http://www.Microsoft.com/download/en/details.aspx?ID=35

  Download and install the latest version of DirectX:

  http://www.Microsoft.com/download/en/details.aspx?ID=5264

  Download and install the latest nVidia Driver suite. I left the autodetect my card software and reset all my default settings. I also installed the full software suite:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Finally, right click on the shortcut of AOE and click Properties. Click on the Compatibility tab and select the following:

  -Run this program in compatibility mode - choose Windows XP Service Pack 2 (!) NOT 3!)
  -Disable visual themes
  -Disable the Composition of the Bureau
  -Run this program as an administrator

  One of the above options maybe work on its own, but that's what I had to do to make it work and I tested it after each step.

  Good luck!

• Soundbooth gives an error message when launching say that my video drivers are not compatible

  Soundbooth gives an error message when launching say that my video drivers are not compatible

  Original title: Adobe soundbooth cs5 video drivers

  Hi Mike,.

  To update the drivers, then check if it helps. Follow the steps in the link given below.
  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN 

• Symantec TDI and NDIS drivers are not compatible. Impossible to uninstall

  Original title: I have a compatibility problem with symantec TDI and NDIS says that they are not compatible with windows vista.  I can't uninstall them?

  I uninstalled the old version of anti virus but can't seem to get rid of these two drivers?

  Thank you

  Hi Richard,

  I suggest you to manually uninstall all products from Symantec to safe mode, then check.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Documents of manual uninstall for Symantec Client Security products

  http://www.Symantec.com/business/support/index?page=content&ID=TECH99631&locale=en_US

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  When you disable / uninstall Antivirus:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable/uninstall your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, then I suggest you contact Symantec's Support.

  http://www.Symantec.com/connect/inside-Symantec/Forums/General-Symantec

  Microsoft has its own security (Microsoft Security Essentials) software which is free of cost. You can install to protect your computer from threats.

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Hope this information is useful.

• After modernizing Ideacentre B320 to Windows 8 broadcom bluetooth or drivers are not compatible

  Original title: ideacentre B320 - Windows 8
  I upgraded Ideacentre B320 to Windows 8 but my bluetooth broadcom or the drivers are not compatible

  Try this,
  http://www.Broadcom.com/support/Bluetooth/update.php

  in my Vaio Z13 the old v6.3 of broadcom drivers did not work, but they are now ok

• Windows 8 Upgrade Wizard indicates which programs are not compatible with your system

  I don't know about everyone else, but she answered a lot of questions, I was wondering about before jumping and spend money for Windows 8.

  Windows 8 Upgrade Wizard

  After running it, I discovered on the programs that I have that are not compatible with Windows 8, which will cost me more money to put to level. After checking prices for updating my software, Windows 8 would be too expensive to upgrade for me?

  Consider you the dual boot of Windows 8 OEM System Builder License with Windows 7 or run it in a virtual machine. It cost $99.

  Its also portable:

  Windows 8
  64-bit (OEM)

  Windows 8
  32-bit (OEM)

• Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  I installed programs:

  Software individual professor teaches Super Set

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• The information about the registered printer are not compatible with this version of Photoshop

  Hello

  I hope someone can help us. I'm a COMPUTER technician in a school, we have about 500 machines to Windows 7 64 bit with around 600/700 users - 200 machines have the CS5.5 Master Collection on which is installed. We have an intermittent problem with printing from Photoshop (32-bit and 64-bit versions). Our printers are for the most part, the (modern) HP LaserJet printers, but we have an inkjet Epson B-510DN and some copiers Xerox too. The drivers are all installed on a central print server running Server 2008 R2 and shared via the client computers group policy.

  In the rooms where Photoshop is installed, intermittently when a student goes to print, we will receive the following error message:

  Saved printer information are not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before you print.

  Photoshop will be gray and then the button "Print" and will not let the user print again. The strange thing is that we can still print from other software such as Microsoft Word or Microsoft software or even non - same Illustrator will print. It just seems to be Photoshop it's has all the problems.

  This occurs when you print to a printer on the site, 90% of whom are HP. As a general rule we set up all of our HP printers with HP PCL6 universal print driver because it facilitates the management of the various models of printers, and we did not limit ourselves atall yet. We are aware that the Adobe software is "preferential" for Postscript drivers, but aren't our printers, HP PCL is their mother tongue. We tried to change a printer for the Postscript UPD driver to test but he brought no improvement. We also saw the issue in depth altogether with our Epson B-510DN, which is configured with the newer model specific driver Epson as uses our photography service. As we see with different printers, I don't think the printer drivers are to blame - unless someone want to prove me wrong.

  Like I said the problem is intermittent, and we are having trouble tracing it down for a user, computer, or a software problem, as it is so intermittent. Has anyone another considering cela and managed to overcome? Given that it only happens in Photoshop is this a bug that Adobe have recognosed and fixed the CS6? The only solution we found that he must go in printer, change the default printer from one to the other and vice versa - cela seems to shut up Photoshop.

  Thank you, Dave.

  Here's the answer that I received from Adobe, and it worked.

  'Ok. Try to open 'print', while holding the space bar; He ignores all the saved values. "Also, make sure that the correct printer that he set as default.

• Information about the registered printer are not compatible with Photoshop elements 11

  Hello - having used successfully PSE11 to print pictures on my printer Epson Artisan 810, printer died and was replaced with a printer Epson Artisan 837.  The new printer works on ALL my other applications EXCEPT I get the following error message after hitting "print" on Photoshop elements 11.

  Message:

  Saved printer information are not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before you print.

  

  You can see on the screenshot attached as the Epson Artisan 837 is a validly installed printer.  All advanced settings were available for selection/editing, and all the printer drivers are up-to-date.  In addition, uninstalled and reinstalled the printer without the resolution of the problem.

  Can someone tell me please in the right direction to solve this problem?
  Thank you, Debbie

  Running:

  Windows XP sp3 (updated)

  Go into the control-> devices and printers-> and rename your printer or remove it and reinstall the drivers and rename the name of the printer. Looks like the Epson series drivers could come into conflict here that would be common for Epson series of printers in this category.