Your wireless card has stopped working properly.

Often, I receive this message "problem reports and solution:
A problem with your wireless network card

Your wireless card has stopped working properly.
There is a network adapter that allows your computer to connect to a wireless network.
To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

I would be grateful for any advice.
Thanks in advance.

Hi dtw1970,

While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

Check the link and try the steps mentioned below.
http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

You can also try posting your query in the Dell Community, see the link below.
http://en.community.Dell.com/

I hope this helps!

Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Your wireless card has stopped working properly, because a compatible driver is not available for this version of Windows.

    I'm not very tech-savvy... like everything. So I have no idea what to do on this subject, but the problem is very irritating because my wireless just randomly stops working for a short period of time, and it happens quite often. Does anyone have any suggestions?

    My computer told me to go to the website of Buffalo, but I had no idea what to do from there.

    Hi Chadbassett,

    Thank you to contact the community Microsoft and we will be happy to help you with your concern.

    According to the description provided, I understand that you are facing a problem connecting to the wireless network.

    He would be grateful if you can answer this question in order to help you further.

    1. have you made changes on the computer before this problem?

    2. What is the brand and model of your computer?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the windows network troubleshooter, and check if it helps.

    Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

    Method 2:

    I suggest you to download and install the latest drivers wireless in the factory.

    Note: If the drive is not compatible with windows 7, I recommend you to install the driver software in compatibility mode and check if that helps.

    Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

    Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

    Reference:

    Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

    We would be more than happy to help you if the steps above did not solve the problem.

  • Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

     

    A problem with your wireless network card

    Your wireless card has stopped working properly.

    To see if an updated version of your WLAN card is available

    Hello Jeroen Ratz,

    You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • Catalyst Control Center window will appear to indicate that the program has stopped working properly

    Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

    Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

    Jim

  • PX Engine has stopped working properly

    Hello

    Yesterday, I turned my computer off and the next morning, when I first started this new next IE opening the page automatically:

    http://WER.Microsoft.com/responses/response.aspx/17604/en-GB/5.1.2600.2.00010300.3.0?SGD=019a5517-6c13-4507-a7a5-cf09b6fd7470

    By saying:

    Download updates for

    has stopped working properly.

    To resolve this problem, see the software Roxio Web site to download and install the update:

    Click here for online access to the Web site for the Roxio software update instructions

    And when you click on the link, has been redirected to the following Web site:

     

    http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms

    By saying:

    PX engine - Description and download

    Knowledge base article: 000070GN.   Print this Article  

    Question

    Describes the PX engine and where to download them.

    Resolution

    • Engine PX Roxio/Sonic Solutions, is what allows to burn and compatibility of optical media such as CDs and DVDs.
    • An update of PX engine guarantees full compatibility with the latest players and media.
    • Each new version of the PX engine is backward compatible with all previous versions of the Sonic Software and most of the Roxio software.

      Here is a list of compatible software titles:

      • Easy Media Creator 7.5 and liked
      • VideoWave 8 and higher
      • MyDVD - all versions
      • RecordNow - all versions
      • DVD for Photostory
      • DVDit - all versions
      • BackUp MyPC - all versions
      • Simple BackUp - all versions

    Download: Engine PX 4.18.16a (updated 8.18.09)

    To install the PX engine update:

    1. Download the latest version here on your desktop.
    2. Unzip the file.
    3. Double-click on the .exe installer and follow the instructions on the screen.

      Note: The PX Engine Setup may require a restart after the installation.

    So, it is a fake website, or is it ok? I'm a little worried, because I have a small Toshiba laptop with no CD/DVD-ROM. And to be honest, a few weeks ago I bought a Microsoft Office 2010 Professional Plus and had problems with the installation. Since then, I got the blue screen twice by saying me serious error. So, would be - that or else, I need to be aware of?

    Thanks in advance!

    Danielle

    ImgBurn does not use the PX engine,

    However other software may install it.

    For example, Winamp can install if you do not uncheck 'Sonic Ripping/ardent support' under 'Media engine' during installation

    I would say that it is safe to install the PX engine update if you're headed there by Windows Error Reporting.

    We could create a system first Restore Point.

    However, the PX engine update is unable to solve the problem.

  • "Dell WLAN Network Card" has stopped working

    Windows gives me a message that "Dell WLAN Network Card" has stopped working. It is a common problem and is there a solution?

    PS: Is alternative medium n to go to the uninstall step (your step 2)? I don't have the "Run" command in the start menu. It is a Dell laptop, Inspiron with Windows Vista Home version.

    Thank you

    If you have a key of Windows on your keyboard, press Windows + R

    Otherwise, right click on start > properties > customize > Advanced tab > scroll down to the list of "items on the start menu" until you get on 'Run' > check the box "Run" and OK your way out.

    If you use the "Start menu classic", it is not "Advanced" tab and the check box command run figure in the list 'Advanced options from the start menu.

  • Windows has stopped working properly

    "" I have windows vista and when I try to surf the internet, after awhile, it appears as a small windows that says "windows has stopped working properly ' and it restarts not close windows. It started before this date sometimes more often until my pc broke down: it became a flashy blue screen with writing something like problem phsichical... damage discs and now I tried to format it but it seems like the same problem comes up... now I can't download it again up to a certain point It is stackable

    Looks like your system is good enough corupted.  I backup my data and restore the computer to factory settings.  The procedure for this varies from a make and model to another, but should be in the documentation for your computer.

    I hope this helps.  Good luck.

  • Get the message "McAfee VirusScan has stopped working properly", but I don't have McAfee

    Get the following reports on the problems and Solutions:

    A problem with

    has stopped working properly.

    McAfee, Inc. recommends that you go online on their site to check the latest updates of information support and product:

    Click to go online on the website of McAfee, Inc. for more information and support options
    I have not installed McAfee!

    Hello

    I recommend you perform the clean boot and check the issue.
     
    Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135 
     
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Intel IMSM driver has stopped working properly. ___

    Frequently after Windows trying to resume from sleep, I get the blue screen of death and restart my laptop. When Windows restarts, I get an error saying Windows has recovered from a mistake and I followed the steps described below suggests. I did them several times but it keeps happening. Any ideas?

    A problem with the Intel IMSM driver

    Intel IMSM driver has stopped working properly.

    1. Click here to download the update the site of ASUSTek Computer

    2. In the file download dialog box, click run. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

      Note
      If you see a Security warning asking if you want to run the software, click run to continue the installation.

    3. Follow the steps in the installation wizard.

    Hello

    I also have the same problem, but my laptop is a Sony Vaio and has nothing to do with ASUS.

    So why it tells me to download a driver for a Sony Vaio Asus?

    ASUS probably makes some parts of your laptop.

  • HP touchsmart IQ775 Wireless mouse has stopped working.

    Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

    Hello

    HP also has their own update so he could be there?

    I would stop automatic driver updates, because they are often older certified and MS is far behind.

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
    ------------------------------------------------------

    This, to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------

    Also check with HP support and forums.

    HP support
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • ArcSoft Connect has stopped working properly

    What should I do to fix my arcsoft promble

    'stopped working' or 'stopped working '?
    Was there an error message?
    What happened that pushed you to conclude that "it has stopped working properly?

    Check to see if it works at all the...
    Assuming you are using Vista:

    Start > in the search box, type services > press the Enter key > scroll to ArcSoft Connect..., click on it >
    topic status, it must be said... Has begun
    under Startup Type, it must be said... Automatic
    If it does not say that, right click on ArcSoft Connect... > properties >
    in Startup Type, click on the pointer to the right and change it to automatic
    to the service status, click Start
    Click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Photo Gallery Windows has stopped working properly

    When I try to use the windows laetitia Gallery, it shows a window that says "microsoft windows."  Photo Gallery Windows has stopped working properly.  then he said: it's the search for solutions, and the solution is always to update windows.  When I check my windows updates, it is said that it is up to date.  I have an automatic update.   This has happened for weeks.  I checked for solutions, installed things he told me too, etc, it continues to be every time.   I am able to use windows movie maker and media player, but it has happened with the photo gallery.

    Here is a solution I found:

    (1) Control Panel > Folder Options > view > show hidden folders and files
    2) go to: [reader
    Letter]: \Users\ [user] \AppData\Local\Microsoft\Windows photo library
    (3) delete all content (or back up if you like or at least copy to a folder separate until that you confirm the data is not lost and everything works as it should)
    (4) Photo Gallery start Windows

    All files must still be there, and should remain intact, but the problem
    should be resoved. It may take a minute or two to rebuild your library.

    If this does not work go to start / search and type in reports on problems and Solutions, and double click on the program icon that appears.  See if he has everything related to this issue.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Defender has stopped working properly

    When I turn on my laptop it user interface say that windows defender has stopped working properly, can not open windows defender to look at settings etc and since it has stopped working the computer guard stopping self to protect self, someone at - it ideas? It also came with "" error 0 x 80000003: one or more arguments are invalid '? "

    Hi richard.weeman,

    Try to restore your computer to a previous state of safe mode.

    Follow the instructions to start the computer in safe mode.

    1 turn on the computer or restart the computer
    2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
    If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
    3. ensure that the safe mode option is selected.
    4. press ENTER. The computer then begins to start in safe mode.

    Follow the instructions below to restore your computer to a previous state of safe mode.

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
    If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
    2. in the System Restore dialog box, click Next.
    3. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

    Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
    4. click on finish.
    5. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

    Check whether the problem is resolved.

    If this does not work, follow the instructions in the link below to perform clean boot in safe mode.

    Step 1: Perform a clean boot
    Step 2: Enable half the services
    Step 3: Determine whether the problem returns
    Step 4: Enable half of the startup items
    Step 5: Determine whether the problem returns
    Step 6: Resolve the problem
    Step 7: Reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    After reviewing the issue, put the computer into Normal mode.
    Uninstall or update the program that is causing the problem.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • File Explorer has stopped working properly from the taskbar

    File Explorer has stopped working properly from the taskbar. Currently, I get only 3 windows on taskbar & opening No. 1 opens no.2 & vice versa, but no. 3 opens on its own. Can someone explain this & find a cure?

    I would like to highlight the file Explorer icon and pin it again.  To do this.

    (1) close all running programs, including records from the file Explorer

    (2) right click on the icon on the task bar Explorer and "Unpin from Taskbar" to remove

    3) press Windows + R to display the race. Type C: and press OK. This will open your C: drive.

    (4) make a right click on the taskbar that appears, the file Explorer icon, and then click "Code Pin to Taskbar" to pin it.

  • Toshiba Flash Cards has stopped working...!

    HI :)

    My problem is:
    When I start my laptop an error message pops up saying: "Toshiba Flash Cards has stopped working".

    What is Toshiba Flash Cards? and what I will do with this error?

    Also, is the utility of flash refers to the Fn key card in the keyboard? If it is, so the problem above will not let me use the usefulness of this key "Fn".

    Thank you: x

    Hello

    Software Toshiba Flash Cards belongs to Toshiba value added package (VAP) and it controls the functionality of the FN button too.

    If this service has stopped working so I recommend if you allow it.
    For this you must have access to the services of Vista:
    -Go to the Start Menu
    -In the white line (search) type services and press ENTER.
    -Click on continue in the UAC prompt, (if it is necessary to provide the password for administrator approval)
    -Search for Flash or PPV cards or similar
    -Right click on the service if you want to disable or enable, and click Properties. You will find an option to enable or disable this service

    Also on this page:
    http://www.Vistax64.com/tutorials/59910-services.html

    But if this will not help you then need to reinstall the VAP.

Maybe you are looking for