YouTube / GIFs causes sound stretch and shuts down the computer.
Hello.
Everything worked him up until the spring of 2014 when my internet lost residence. Finally moved to another residence in summer 2014 and has noticed that when using my laptop once again that Youtube videos and animated GIFs stretched and stuttered sound and froze my computer.
Flash player, Java, Windows Media player and IE were affected. I tried to update all but settled is constantly interrupted by error messages. It all traces back to IE but can not enter say it or re-install / update. I rather not uninstall all of the programs mentioned above for fear of these programs is not able to install afterwards. Restorations and restores system were made but only up to a point (less than a month ago) and not to the most remote, with few results.
Also somehow had internet limited during spring 2014 from time to time but Kaspersky failed to update normally and himself knocked out. Had to use his troubleshooting and Best Buy help re - install, but it was a successful installation. Perhaps something got through that affects those above apps but Kaspersky found nothing wrong.
A question, someone of you recommended a total OS re - install at this point? Operating system is Windows 7.
Hello
1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.
2 disable hardware acceleration in your browser:
Firefox-
- Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
- In the Firefox options window, click the Advanced tab, and then select 'General '.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
- Now restart Firefox and see if the problems persist.
Chrome - http://www.sevenforums.com/tutorials/271264-chrome-gpu-hardware-acceleration-turn-off.html
Kind regards
Patrick
Tags: Windows
Similar Questions
-
Original title: Windows 7 problem
I will have questions all the time my office. When I try to shut down rather than get the loggin screen the screen starts flashing as trying to load screen and then finally shuts down the computer. I just bought the computer and it runs Windows 7. What could be the problem? Oh I forgot to mention that, after that I start the computer the configuration screen appears saying that windows did not close normally and if I want to start in safe mode.
Hello
Here are a few questions to better understand the issue:
1 made only while off log?
2. what happens when you restart?
3 have you tried with different user accounts?
4 you did changes to the computer before the show?
Let us try the following and see if they help.
Method 1: Check the event viewer for more details on this subject.
Event Viewer is a tool that displays detailed information about important events on your computer.
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
Method 2: Run the following fix:
There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2
http://support.Microsoft.com/kb/975777
Method 3: Perform the clean boot and check
It may be that a third-party application is causing this issue. Put the system at boot.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.
Method 4: I suggest you make a system full scan just to be sure.
Here is a link that will give you information on how to perform a full scan of the system:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
, Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
and I don't know how to find the updated info? Help! It takes 5-10 minutes every time I have shut down the computer. How to cancel this update which blocks my crt?
Thank you!
Julie
Hi jjackbcop,
Thanks for posting in the Microsoft Community.
I understand that you are facing the issue with windows updates offer several times over and over again.
Method 1:
I suggest you perform the clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow these steps to configure Windows to use a Normal startup of the link report section to return the computer to a Normal startup mode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2:
I suggest you send the link and check (this also applies to windows XP).
Windows Update or Microsoft Update repeatedly offers the same update
-
I tried to use the "Search" function to locate a specific file. The computer froze... not allow me to cancel when I realized that it wasn't working. The only way I could get the closing of the window had to shut down the computer.
Hi DyleAcker,-Search function work is no problem earlier?Run the troubleshooter from the link given below and if it helps to fix the problem: -
Cannot shut down the computer properly
* Original title: trouble
Can someone help identify me the programs running on the computer? He informs me always force shut down the computer because some applications running behind. Since I could not know all the applications running on my taskbar... Y at - it an idea to browse all running applications so that I can all be closed before shut down us my computer?
Hello
1. What is the exact error message?
2 has there been recent changes made on the computer before the show?
Please try to update us with the results and the methods provided below.
Method 1: Perform the clean boot and check
It may be that a third-party application is causing this issue. Put the system at boot.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.
Method 2: Run the patch section and check if it helps.
There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2
http://support.Microsoft.com/kb/975777
For more information, see the articles and check out them.
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Ways to improve your computer's performance
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
Turn off your computer properly
http://Windows.Microsoft.com/is-is/Windows7/turning-off-your-computer-properly
Let us know if it helps!
-
Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista. I shut down the computer?
Yes. Close and restart, the updates will catch up.
-
Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.
Hello Tallydupp, welcome.
Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
Try to uninstall it if it exists.Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Is it possible to shut down the computer after the call to a draw on Chess Titans?
Is it possible to shut down the computer after the call to a draw on Chess Titans? It does this to me almost everytime I have the King stuck, but when my King is stuck, I lose each time. WTH?
original title: circulation of Chess TitansIf its your turn and you can make any legal move either with any piece, but your King is not in check, it is then deadlock. Deadlock is considered a match draw in standard chess rules. For examples, see:
http://en.wikipedia.org/wiki/Stalemate .
If your King is in check and you can immediately do a legal process to get out then check it's checkmate. For the person who the King is in check, this counts as a loss. For examples, see:
http://en.wikipedia.org/wiki/Checkmate .
In the two scenarios above, can even vice versa (it may apply to your opponent too).
If the above explains what you see in Chess Titans then the program is correctly following standard rules and it is not a bug in the program. If she does not explain what you see then please explain more precisely the scenario.
-
After I shut down the computer, he re boots itself after 5-10 minutes.
After I shut down the computer, he re boots itself after 5-10 minutes. Weird. I tried to change the settings. Can anyone suggest anything?
Hello
1. How did you shut down the computer?
2. are - it stop with the power button on the computer?If so, this causes the computer in a standby / hibernation
If you shut down properly by clicking on start > stop, then you must wait until the computer is shut down before you close the lid of the laptop. -
Menu start no longer displays options to shut down the computer, someone knows how to change that? The power options menu did not help.
When this happened to me, it was malware that didn't stop my computer, probably because she wanted to do something with it. I held the power button down until the computer is turned off manually, then I rebooted in safe mode - I run Vista - and ran some virus and malware programs until I found the beast and it crashed. You can also run a scan MS online at onecare.live.com, which was updated earlier this week. Moreover, I had not any data loss or permanent damage.
-
How to tell the Scheduler to shut down the computer after completing the task in Windows 7
I created a task using the Task Scheduler that runs on my computer at 23:58 on Saturday and then back up my PC to my external hard drive from Seagate. That works fine, but I'm not finding a way to have Task Scheduler shut down the computer when the task is completed. I encouraged four hours for the backup must be completed. When I am absent Sunday or more I come home to find the PC always on. I have reviewed the task scheduler management articles and see no way to reach my goal. What should I do? Thank you.
zigzag42
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are facing problems using Task Scheduler.
I suggest you to refer to the suggestions by Aziz N replied on July 14, 2010 and check if that helps.
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
I use an ACER Am1201-B1603A 4800 + AMD Anthlon x 2 #gig ddr ram 120 GB windows xp sp3 with all updates...
Whenever the computer is shutdown with in a few minutes, it restarts. This is a new installation like 3 days...
Any help would be appreciated to grealty
Hello
Method 1
Refer to the article below and try the steps mentioned, check if it helps.
Windows XP restarts when you try to shut down your computer
http://support.Microsoft.com/kb/311806
Method 2
If the previous step fails then I suggest that you check to see if the problem persists in safe mode.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 3
If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
-
When I go to the right of my Start button and try to Hibernate, sleep, or shut down my computer, all the buttons are gone. Now, I don't see that "change of user, logoff or lock. Now, in order to stop, I have to go to the Start button and to the right, the trunk, which brings back me to a screen to logon with a red box and an arrow at the bottom right of my screen. It of only then when it allows me to shutdown my computer. Can anyone help.
Hello
How to remove or display the Start Menu in Vista shutdown Options
http://www.Vistax64.com/tutorials/105003-shutdown-options-start-menu.htmlButton missing in the Vista Start menu
http://www.Visser.com.au/blog/missing-shutdown-button-in-Vista-Start-menu/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I decided to re - install Windows XP Pro x 86 on my wife's computer. So I went into the BIOS to make sure that the CD/DVD drive has been configured to start first, and then I inserted the DVD and then restarted the computer.
Now, the XP disc started normally. I installed XP to the point where I deleted all previous partitions and then created a new. Windows then displays the warning that the computer would not be able to boot up to what XP finished installing. I guess that's because start-up files have been deleted when I deleted all previous partitions during the installation.
Right after I clicked on enter the warning message, the computer shuts down. No! So, I try to re-boot, in the hope of all simply continue with installing XP, but instead, the computer will display a message indicating that the computer has been stopped because of the high operating temperature. I then go ahead and get a message saying: "Error loading operating system."
No matter what I do, I can't go any further. I can't get into BIOS or anything. If I try the F10 key (or whatever the keys are), I get a beep. It does not properly respond to my entries.
I don't think that the high temperature operation destroyed all components. The computer stopped several times in the past. Furthermore, it would not be part of integrated security if Microsoft enabled the computer reach a destructive temperature before stopping. I think that the problem occurred during installation was interrupted just after that previous partitions have been deleted.
BT, I don't know what to do now. Loooking for suggestions.
Hi Diadem1981,
You can follow this link completely & check if the problem persists.
Error message "Error loading operating system" when you restart your computer during installation
Reference: How to install or upgrade to Windows XPHope the helps of information.
Please post back and we do know.
-
stop ID10T users of abandonment downloads by shutting down the computer or put it to sleep
Key issue:
Short of locking all users of the computer, is it possible to use my admin account to stop temporarily to other users of the computer is shut down, put to sleep or into hibernation mode? At least until that I get home from work?Explanation:
Normally, all users should be able to put the computer into standby or turn off the console. I want that way normally. However, I share the computer with other people in the House and must work full time, leave the computer unattended during the day.
For the last three days, I tried to download a LARGE file from a slow server an approximate time of 6 hours. Oh, to add insult to injury I can't the server let me resume a download. To allow the user to get on the computer while I'm at work and by downloading the file, I used Fast User Switching (name of the XP, in case it's called something different to 7) to put the computer on the Welcome screen, while my regular account download.
For the past two days, despite myself, leaving a note saying: 'Do NOT stop the computer or put it to sleep', when I got home from work, the computer was off, and the download was incomplete. I got an explanation "you were always telling me to stop when I'm done, I did not forget at this time." Then today I started downloading two hours ago and was only asked "could I please verify my email address?", so I donnГ the computer. When she was done, she put the computer to sleep, which was just as bad as l ' turn off as much as to cancel the download.
Short of locking all users of the computer, is it possible to use my admin account to stop temporarily to other users of the computer is shut down, put to sleep or into hibernation mode? At least until that I get home from work?
Hello
You need to be logged in as an administrator.
Follow the steps mentioned below:(a) open the Start menu, type secpol.msc in the search line and press ENTER.(b) to expand local policies in the left pane, and then select user rights assignment.(c) in the right pane of the user rights assignment double-click Shut down the system
(d) select (highlight) listed (s) or group (s) that you will not be allowed to turn off the computer more and then click Remove.NOTE 1: You can press on and hold down the CTRL key to select several listed users and group.
Click on apply.Note 2: Windows 7 Pro and Ultimate have secpol and gpedit.
Maybe you are looking for
-
Safari - browsing the internet
When you use safari, while internet on how to get back to the website you were just before?
-
Hi guys... I have a big problem... Well, I got this Hp laptop, 625 for my B - day (with no cd) whatsover. with a Linux SuSe 11 on it... and I didn't like it... so I wanted to remove it... and had trouble... I tried to install WIn XP on it, and it doe
-
Wireless for HP 15-d053sq Win 7 drivers
Hello I installed windows 7, 64 bit, on a computer laptop 15-d053sq HP and provided wireless drivers do not work. Someone has an idea how where and whether compatible drivers for windows 7? Thank you. P.S. I have the same bluetooth problem
-
Windows could not search for new updates: Error Code 80080005
I'm doing a search for new updates to make sure that I'm updating and it will not search for them. Any help would be appreciated.
-
How can I copy and paste a page in the same DC Adobe .pdf?
How can I copy and paste a page in the same DC Adobe .pdf?