Z book 15: how affect legacy BIOS boot safe mode and disable.
How to change the new white BIOS to the old legacy? The new has the secure boot disabled in my case setting. In the tutorial from hp, he shows how to turn off startup secured using the old bios.
dannychris37 wrote:
How to change the new white BIOS to the old legacy? The new has the secure boot disabled in my case setting. In the tutorial from hp, he shows how to turn off startup secured using the old bios.
Have you tried this.
Start Mode UEFI or Legacy BIOS mode
Tags: Notebooks
Similar Questions
-
How can I get my computor out of safe mode and go back to my normal mode?
How can I get my computor out of safe mode and go back to my regular walk mode?
Hello
Are there any error messages when you try to start?
Start - type in the search box-> find MSCONFIG in top - right click - RUN AS ADMIN
Startup tab - uncheck secure boot
If you can not always start in normal mode, try Startup Repair
This tells you how to access the System Recovery Options or a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Changed boot to safe mode and back with no problems. Then started in safe mode (repair active directory) and now after boot have a blue screen with icons for ease of access options and start/stop. Arrested and released to market only to return to the same screen. How can I get out of this loop?
Hello
Thanks for posting your question on the Forum of the Microsoft community.
I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
I would like to know some information about the problem so that we can help you further.
1. What is the number of brand and model of the computer?
2 are you facing any problem in normal mode?
Follow the steps described in the article below.
July 6, 2013, Shawn "Cmdr" Keene [MVP] replied to the Microsoft forums.
Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.
Thank you.
-
I have a HP Pavilion 1013w, I've been having uninstall problems with wireless network card drivers. PC locked up so I held in the power button until it stopped. now, after windows loads I get service "message box has failed" and the pc crashes. How can I get into safe mode if I can do a restore?
Hello:
Start the PC and keep tapping the F8 key until you see the windows safe mode.
Paul
-
When I try to install Norton Security Suite, I get a message that says im in safe mode. How to get out of safe mode?
Hello
Do you use Safe Mode to install the software?
Restart the computer and let Windows load normally.
-
my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.
Hello
As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.
http://support.Microsoft.com/kb/310353
If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How get rid you of safe mode everytime I turn on my computer
whenever I turn on my computer one sign I get all 4 corner, s of the sreen and say, s safe mode and I can, t turn off what effect, s the permance of my computer, that someone has an answer to this problem.
Hello
Read method 2 (article 2) in the link provided on the start in Normal Mode.
And check under the Startup tab that Safe Boot is not checked:
http://www.Vistax64.com/tutorials/123496-safe-mode.html
See you soon.
:
-
original title: safe mode
my laptop is insafe mode and now my screen is huge, and I have no sound while it is in this mode... How do you turn off safe mode?
Hello
audio drivers are not loaded in Mode safe
read this to get out of Safe Mode:
- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start () button.
- In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
- The System Configuration utility opens
- Make sure the Normal startup is selected
- then click on the STARTUP tab at the top
- Make sure that the startup is disabled
- Apply - OK - then follow restart guests
-
Horizontal lines in all modes (boot, safe mode etc.)
Horizontal lines across my screen all... This occurs during startup, in POST, on the login screen in SafeMode etc etc...
Example 1:
the PC will sometimes hang after POST, before starting Windows and occasionally asking me if I'd like to try to get it back, that does not solve the problem. If she manages to get to the standard login screen, after typing my password, the PC will crash.
I am able to boot in safe mode, but the lines are still there.
Example 2:
This obviously isn't a problem of graphics driver that the problem persists in safe mode and when starting. I also tried on 2 different monitors, who work very well when hooked to other devices.
If someone could give me a solution or an idea where the problem may lie... I would be eternally grateful.
My PC is as follows:
Windows 7 Home Premium 64-bit
ASUS Sabertooth 990FX Motherboard R2.0
8-Core processor, 4.3 GHz AMD FX 8350
16 GB (4 x 4 GB) Corsair XMS3 DDR3 1333 MHz RAM Performance
ASUS GeForce GTX 760 2 GB 1033 MHz GPU
512 GB SSD
2 TB HARD drive
power supply 750W
Case Antec, with lots of cooling (5 fans)
More photos HERE
Hello
These lines indicate corruption graphics driver or lack of graphic material.
Monitor > cable > Port > which is connected to an integrated graphics card to a location on the motherboard or graphic material that is part of the motherboard.
Glance of replacement or Exchange the graphic above.
See you soon.
-
HP ENVY 17-n013na: the Legacy BIOS boot option does not work
Support dear HP team,
I recently bought for laptop HP ENVY 17-n013na . It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:
BIOS version: F.04 Rev 5.0
I tried updating to the latest version of the BIOS on the Support site.
To activate the option to boot legacy, I followed the following steps:
- Entered, BIOS configuration utility
- Go to the System Configuration
- > Boot options
- Changed the setting to the Legacy Support on " Enabled"
- F10 - save changes & exit
Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.
Please provide any help & suggestions.
Thank you.
Kind regards
Eugene
I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html
Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc
Can close the topic now.
Thank you.
-
so the only way I could figure at the start of media to clean install was to boot from... legacy mode is there an "easy way" to swap the boot of inheritance in uefi? I only ask because it takes about 3 minutes to boot from legacy instead of 20 seconds and my ssd drive is missing?
If you dΘmarrez from a USB drive.
The USB key must be created in the UEFI-bootable mode, otherwise it will not be recognized in UEFI mode.
-
Need to enter boot BIOS options have system error disabled 59025057 also want to disable the password of the bios for the future
Please enter:
46983099
Kind regards.
-
can not connect to windows
If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.
In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.
If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.
http://home.eunet.no/pnordahl/ntpasswd/
Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM.
MS - MVP - Elephant Boy computers - don't panic! -
How can I get my laptop out of safe mode and back 2 normal?
How can I get my computer out of safe mode
It is what is on the link below in REVERSE order.
The link is on the way to get into Safe Mode; but the instructions I give you is out!http://www.bleepingcomputer.com/tutorials/tutorial61.html
Go to the above link >summary > Vista
Start Vista normally
Uncheck the boot under the STARTUP tabUsing the method of System Configuration tool:
Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode safe. For reasons that why you should read this.
- Close all running programs and open the windows if you are back on the desktop.
- Click on start () button.
- In the search box of the Start Menu () type msconfig and press enter on your keyboard.
- The System Configuration utility will open and you will see a screen similar to the one below.
Figure 8. Vista System Configuration utilityClick the Startup tab.
- You will now be on the screen start as shown below options.
Figure 9. Tab of Vista startup in the System Configuration utilityUncheck the box secure boot
- Press apply and then press the OK button.
- Now, you will see a prompt stating that you must restart the computer to apply the change.
Figure 10. Reboot promptClick Restart to restart your computer.
See you soon.
Mick Murphy - Microsoft partner
-
Not possible to recovery - how to get the start safe mode on Satellite P300?
I am trying to solve a problem starting on my laptop of aunts. I can go to the menu setup F2 withh or I can choose the option of F12 to choose the start of.
Regular basis she did some back up on a certain E-device of the hidden drive and she is sure that she has not deleted that one.
I would now like to start the computer in safe mode. But I can't get to get this screen
Only two options are F2 or F12.
Is it possible to install something on an external drive and try to boot from that device, because I can not choose the E-unit.
Thanks in advance and please if I have to inform you of further information, although it won't be easy because I can ' t start lol
Liesbet
Start your laptop and press F8 to display the advanced startup options.
It work?If Yes please try to start the operating system in safe mode. Can you do this?
Maybe you are looking for
-
How to access my windows vista speech recognition software
I saw that there is a function to convert the word to txt I would just know how can I to use on Windows vista?
-
Dell Inspiron 2305 black screen.
Long story short... When you turn on the pc. You can hear the hard drive and dvd drive, commissioning... but all you ever get is a black screen... not even the screen of the bios dell... so far, the technology has replaced the lcd inverter Board, the
-
I have a newish system running windows 7 - I noticed that sought were slow and idenified as windows search service does not start - on attempt to start it, I get the above error. Try looking Microsoft\search\data watch applications and temporary di
-
Just passed the VCPD550 but...
I just took and spent the VCPD550 (the review of Delta VCP550) online with only 7 days before expiry, but I fear that I could have created a problem for me. I had previously registered in the review of the VCP550 at a testing center next week and jus
-
VSA license and essential plus
Hello everyone, how are you going to do?Guys, I have a question about the license of AUV with essentials more. I brought the most essential and installed 2 hosts and the ASB. Everyone says that VSA is now FREE with any purcharse essentials more BUT I