Z2_S327_150427_ROW - camera does not

Similar Questions

• Updated to IOS 9.3.5 camera does not work on iPhone 6 Plus

  Hi just recently, I've updated the iOS software on my iphone 6 and then I noticed that the camera does not just black screen in Meanwhile appeared when changed to video work the two camera when choose photo camera does not however any idea how to solve this problem

  You see a black screen or a closed lens

  If you see a closed lens or a black screen when you open the camera app, try the following steps:

  1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
  2. Force the application to close, then open the camera again.
  3. Restart your device, and then open the camera again.
  4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.

  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

• Click camera does not

  Hi all

  I have a 6s model 64 GB iPhone.  For some reason, the click of the camera does not work when you take a normal picture.  If I have a filter or change a square photo, click works fine, its only when I use the photo without filter mode.

  I tried reseting all settings, by turning the lock/keyboard click and outside and adjust the volume of the phone, it just seems to not only work in the scenario above.

  Any ideas on how to fix or is this a known bug?

  Thank you

  Paul

  Hello, you can try to do a hard rest before to backup your data.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• Camileo S10 camera does not remember the setting of the image stabilizer

  Hello reader Forum,.

  Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
  I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

  Greetzz... Ben

  Hello

  This could be possible.
  I remember that the focus does not work if the stabilization has been activated
  So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

  Welcome them

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• camera does not turn on

  I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

  The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

  Note: The charging light turns off, charging is completed.

  If the camera does not turn ON even when the load is in progress, the service is required.

  You can initiate the service from the link below:

  https://eService.Sony.com/

  You can also contact our telephone support or Chat to try additional troubleshooting procedures.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

  If my post answered your question, please mark it as "acceptable Solution".

• Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

  I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
  I checked the drivers and they work, I have 10 Diretcx and it works.

  When I open the camera program, it works well.
  I put the camera program is not at initial start-up of laptop.
  I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

  Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  Hello

  > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
  You should check if the webcam has been chosen correctly in Skype video settings.

  If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

• Camera does not work on my Satellite C50 - B

  C50 - B PSCMLA-02F00S satellite

  I recently bought my C50 Satellite and that you want to use my camera and when I click the icon it tells to connect me your camera. If I go to device manager/imaging services there is no camera there.

  I want a video contact in Facebook, my family and the camera does not work.

  Can someone please!

  Hi Alicia

  Are you using the original operating system preinstalled that you got with your machine?
  I assume it must be Win8.1, right?

  What happen when you try to use photo app?

• Satellite L500 - Web Cam does not work

  Hello.

  My book built into the camera, and that camera thos not inicialize,

  I have ave made a HARD drive recovery, and after the web camera software was not installed. I downloaded this software one of the device drivers and it instaled in the laptop, but the camera, but the camera does not work.

  Is there a way to fix it?

  Thank you.

  The question is: is cam material recognized and detected by the system or not?
  You can see in the Device Manager?

• Camera does not

  My camera does not... tried all the possibilities... my OS is Windows 10. attached.pls help screen capture

  HII, thanks for your response.

  The problem was solved when I have the software device driver upadted.

  Concerning

• normal flash camera does not work after the update of Marshmallow to lenovo turned vibe

  after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable

  but when open video camera flash is working and also with any another application to camera is working normally

  How can fix this?

  reset the camera settings after Flash open ligt

• Does anyone know how to connect a Garmin GPS to the EOS 7 d? The camera does not see.

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

  Once I had an application that you had photographed the display of a GPS device (the type that a rider could use because they observe "breadcrumbs" trail of your itinerary) on #1 chassis (they wanted to just make sure that you have a picture of the time on the GPS display.

  You then go about your day taking photos with the GPS running indepdently.

  At the end of the day, you import the images and it asks you to enter the time displayed on the first photo.  It uses the display of GPS time and calculates the offset of the time, the camera recorded in the EXIF data (just in case the clocks were not perfectly synchronized).  Then she uses the breadcrumbs on the GPS track and apply the GPS position, data for each photo from your camera roll.

  It was a bit complicated and app tried to take over your App "photo management" (which I didn't... "I wanted just the position data added to the existing images), but it worked.

  The fact is... I was able to add correction of position information to each photo and it did not require actually integrate the GPS to the camera (it was quite after the fact).

  Today, I own the module GPS Canon (MUCH more convenient), so I don't deal with that more.

  hikeray2 wrote:

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?