Z2 Vibe Pro - Panorama problem

Similar Questions

• OfficeJet Pro 6830: Problem with multiple Pages into one file

  I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

  I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

  Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

  Please advise.  Thank you.

  Hello

  Scan you from the glass flat or the top of the charger page?

  If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

  If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.

• Z2 Vibe Pro: guaranteed

  Hi all!

  Everything was on the phone for two hours with different numbers of lenovo support to try to get a guarantee assistance for my K920 / Z2 of Vibe Pro. A crossed 9 transfers with no luck. The connector of the screen on my Z2 pro has become delaminated card and is not something I can fix in my lab, so that warranty service need. Someone at - he got successfully warranty/repair performed on their K920, especially since the United States?

  Thanks a ton!

  Hi williamtdr, welcome to the forums.

  Lenovo smartphones are not sold by Lenovo in the United States and so there is no structure of support guarantee in place. Smartphones have guaranteed international support, but the support is naturally available in the countries where they are officially sold by Lenovo.

• CS6 first Pro installation problem

  I am trying to install the Premiere Pro CS6, but when I do, I guess these files are supposed to be pro first appear (note that I tried to install several times)

  

  I'm running on Windows 10 Pro 32 - Bit x 64 - according to the owner, the problem doesn't force me to do anything, if I leave and you try to install the Premier Pro, the problem occurs, and it is never worked before on my computer, I don't have Add ons.

  It's confusing me, CC said I installed it and I don't have Photoshop installed fine, but Premiere Pro is not, anyway I can fix this?

  Bryson,

  You need an OS to run Premiere Pro 64-bit. It has been like that for quite a while. Sorry...

  Thank you

  Kevin

• Z2 Vibe Pro - Microsoft Exchange problem

  Hi, I experience problems with my new Vibe Z2 Pro when connecting to my Microsoft Exchange business. My company requires the use of the client certificate for the connection, I imported the certificate successfully, but when the Email application trying to connect to the server, he said unfortunately "not stopped keychain". All this experience? Any possible solution?

  
  

• VIBE PRO - problem with charging z2

  Dear Lenovo,

  Not sure if this related to the update of LINE S230, but after having received it, my phone stopped charging properly.

  There need full 15 hours (!) is now charging at 100%...

  I tried different Chargers and different cables, no difference.

  I also did a hard reset to today. It did not help

  Any recommendations?
  Should I try to return to the Kit Kat?

  Thank you!

  Hi Monokot,

  As I said in the message, it looks like that the communication between the modem and sim card has some problems. Then please first check the sim card if the card works on other mobile phones, so I suggest you get in touch with the service center on the HW.

  Thank you.

• My Lenovo K920 Vibe Z2 pro display problem remains half vertical display is

  I bought my lenovo in October the year last from flipkart. It was working fine until a few days before. So for these last days, his half of the dsiplay blackened vertically on the right side sometimes, and he became full display after a while. However, today he has blacked out again and just not complete for several hours. I am able to see only half of the screen still remains. Please help if something could be done for her. Or should I send it to the company as it is still under warranty. Any quick solution will be appreciated, as his difficulty involved in communication.

  RVS Pawaiya

  Take it to the service center.

• MacBook Pro display problem

  Hello members of the community.

  As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

  The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

  I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

  It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

  I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

  In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

  I have the entry level MacBook Pro with the retina, last generation.

  Any constructive contribution welcome!

  See you soon.

  -adreaux

  Hello bernardn753,

  After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

  How to reset the NVRAM on your Mac.

  Thank you for using communities of Apple Support. Good day.

• Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

  Thank you for taking your time looking in my question.

  My Machine: Macbook Pro retina no Mid 2012

  What I wanted: install win 8.1 pro 64 bit on a second SSD completely (without Partition) / replace the optical drive

  My problem: everything works fine, but no sound. Drivers seem to be the cause:

  
  How I installed windows:

  1. I put the own ssd in the main Bay + optical drive with disk 8.1 win

  2. Windows disk initialized and installed windows 8.1 64-bit without errors

  3 install the drivers for bootcamp support

  4 returned the Mac ssd go back to the main Bay and put the ssd of windows in the caddy and then in the optical Bay

  5. starting is by holding alt and choosing between mac os, recovery and boot efi (which contains windows)

  What I tried (all of the following are ineffective):

  1 reinstall/repair drivers bootcamp support from different sources (of the download on the website of apple and the bootcamp assistant application)

  2 reinstall the realtek drivers

  3. how to install intel drivers graphics hd 4000 (found a source who said it would do the trick, there is no)

  4 uninstallation of controller high definition Audio (it always seems to come back)

  5. manually download and install the drivers http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip cirrus

  I get the following error:

  

  6. place the ssd of windows in the main Bay

  7 troubleshooting sound (a 99% sure that this would not work)

  8 throw up my hands in despair and uncontrollable crying afterwards (was probably the most effective on 8)

  That I need clarification on:

  I found found some sources say that installing windows via EFI mode causes no sound, but I'm not sure if the way I installed it is considered to be the efi mode as I have never had an option for efi mode. However when I start upward and hold option the name of the windows disk named ' BOOT EFI. Efi mode is how I installed windows?

  What I need instructions on:

  Some sources claim that I need to install windows in hybrid MBR mode however I do not know how I would install windows any differently than the way I did above. How can I go about installing, not in start efi mode, if I want to spend the whole ssd for windows / that I would do anything differently than the steps I listed up there?

  Thanks a lot again for your time and help!

  Windows must be in the main Bay and must stay in the main Bay after installation. You can either use the wizard of BC and create a USB installer which will also create a legacy BIOS/MBR W8.1 (default value for your specific model) or if you choose to do it manually, make sure that the icon of Windows from the installation media, not EFI Boot.

  If you start from the DVD W8.1, the default value is Boot EFI. BC Assistant did a bit of work for you, in order to avoid the is not a good idea.

• Mac Pro start problem

  I have a Mac Pro Tower, that will not start the first time I press the power button, the machine "lights up" in a way that the light in front comes on and I hear a click, however the fans and readers do not engage and the screen is blank. I am then forced to hold down the power button until it stops and hit the power key once again, and each time on the second time it starts. Now I use this equal parts of Mac on the Mac partition and equal parts as a PC, this problem appears when I start in two, but I put in this detail to explain another thing, I have a PC graphics card in the computer. I have all his own CUDA Driver Version that allows me to do it on the mac, but it might have something to do with it. Even if the problem persists when I have my Mac AFI graphics card in the computer as well. I also want to add some other details, nor the mac from the PC partition can go in "standby mode" or the computer goes back to be a brick with just the front light on. (Sometimes the LED keyboard works, and sometimes is not after the mode 'sleep'). In addition, if I restart the computer, it starts well the first time, as well as when I move from mac to PC partition. I tried to do resets of LANDAU and SMC and that has not worked, someone at - it ideas?

  Thanks guys for any input you may have.

  The next time that you touch inside, try to carefully remove the 3 v button cell half hidden behind the graphics card and check the required 3 Volts. If less, a new is needed. You can also use CR2032, which is used for the remote control-door garage and car-door-key original is BR2032.

• Network with the MacBook Pro 15 "problems

  My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.

  2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated

  Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few

  the company's programs, but I mainly work on the Mac side.

  An intermittent connection problem became constant after a week of using the computer.  My router DLink DSL (model 2750B) is two feet away from the computer.  In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem.  IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own.  Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."

  I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine.  I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)

  Any suggestions on how to solve problems, or I would return the computer.  It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi.  I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.

  Thanks for all the wisdom and strategies.  Maggie2012

  Hello maggie2012,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:

  Safe mode

  How to test a question in another user on your Mac account

  Best regards

• MacBook pro space problem

  Hello guys,.

  I have a macbook pro. and it's 120 GB of memory. but the last 2 months I have a problem on the tried device.i and remove a large number of my data to it still mac pro.but says I have enough space.i check specifications. there I found that more then 35 GB is covered with another file.

  can someone help me to make room on the device.

  I mean how can I delete or free up space by deleting other files.

  I give u a screenshot to make u more understandable with the problem.

  guys thank you very much in advance.

  Raza

  

  Hello

  Just to let you know, OS X only requires about 9 GB of free storage space. That does not take into account photos, music, documents, notes, etc.

  Help here > http://pondini.org/OSX/DiskSpace.html

  Restart your Mac after the deletion of data to see a difference in storage space.

• Power Mac Pro 2010 problems

  So I just bought a Mac Pro 2010 and it ran fine for a day or two and then I noticed that when he falls asleep the light never blinks and turn even a problem.

  If the unit is off, when I first press the button there is a click but the led stays off and nothing happens. I have to hold down the power button until there is another click. When I press the button once again, there is a click and the power of fans on and the machine finally starts. Although the chime time seems very long.

  However, when he goes to sleep, the monitor turns off, I can hear the fans turns off but never flashes as it should the. Subsequently, the computer cannot be awakened from his sleep. This happens if the timer is active, I press the power button or choose to sleep in the menu. I have to hold the power button to turn it off completely, then start it again. Also, when I press the power button to restart the same as above occurs.

  I ran Onyx to flush all caches that I left my SSD (OWC E2) my Mac Pro 2008. I also reset the SMC and the LANDAU and also ran the Apple Hardware test. Nothing has helped and no errors not found in one of these trials. I tried simply have a HARD classic in this drive and removed all my cards accessories but that does not make a difference. Even when I start windows via boot camp the same problem occurs with sleep.

  Any suggestions?

  I had a similar with a 2010 6 core Mac Pro problem except that the Mac I never sleep, so sleep was not involved. An Apple Store Genius diagnosed as a button battery failure and, eventually, the PS. I asked that the two be replaced since the support for that Mac ends. It's worked OK since then and at Pick-up, engineering was agreed that, while the battery needs replacement, the real problem was the PS.

  Until the repair, one of the things that helped aims to let the Mac disconnected from the AC line for about an hour. Immediately after it by plugging in, he would sometimes start and then work.

• After El Capitan on new Macbook Pro Mail problems

  Mail doesn't work properly anymore now that I use a new mid-2015 MB Pro with El Capitan.  Non-Pourriel, including remittances from my own account to myself, is marked junk and put in the Junk folder. Mail that is not marked as spam is also put in the Junk folder. I can't find the rhyme or reason for the choice of the filter. I always install the latest updates on all of my devices. Can someone tell me how to solve this problem? Thanks in advance.

  There are two ways to designate as junk mail. One is based on the local 'training' that you used in the Mail application. These emails are marked in Brown, the other method is by e-mail based service provider on whatever rules or databases they use. These emails end up in the Junk folder, but are not marked in Brown.

  The only way to deal with the second type is to open a session in the portal provider email, change your preferences or update the address book provider.

• Satellite R20 - Memory Stick PRO Duo problem

  I looked and saw a lot of similar posts from users with a similar problem. Unfortunately, most of the answers suggested by looking at the user manual and taking note that the phone does not support the Memory Stick PRO Duo. Technically, that's true. However, many Sony cameras come with an adapter that turns the PRO Duo stick a Memory Stick PRO. These include very well in Flash Media Bridge adapter. The manual also indicates that the drive supports this stick.

  What's weird, is that Windows Vista recognizes the insertion of the memory stick, but he then told me that I need to format it before so I can use it. I don't remember what I used the term, but there was a time eventually (with an older driver and/or the installation of XP?) when I could operate using a tip of reboot or something. No, however, I get boor. The stick (and its adapter) work very well. I can read it using another USB adapter. (Connected to my dell monitor 24 "... so not exactly a portable solution)

  My laptop is the Satellite R20 Tablet and my OS is Vista Business

  Thanks in advance for your help.

  -Michael

  Duo cards have been gradually were they not? I'm sure that the Duo do not support Toshiba laptops. The only solution is a USB adapter, preferably a compact.