Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup
My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.
As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not
So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror
As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!
HP should really study this fault
In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to
Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.
Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.
But no, everything was fine
Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:
I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed
But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.
I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.
But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.
And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty
It is a mediocre service if you ask me...
Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.
I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.
PS: Add this post so I can mark the thread as solved.
Tags: HP Desktops
Similar Questions
-
Seems to be a problem in windows 7.
Hello
1. is this a problem with only on this game on facebook?
2 are you able to access other videos and games on facebook?
3. what internet browser do you use?If you use Internet Explorer you can see the steps below.Method 1.
Given that most of the games requires the Java runtime library or Adobe flash to work I suggest you to install the Java runtime library on Internet Explorer and Adobe Flash Player.
a. Update Flash player and Java Flash:
I recommend you update Adobe flash player on the website below:
http://get.Adobe.com/flashplayer/b. also download and install the library Java Runtime from the link below:
https://www.Java.com/en/
Method 2.
a. If the problem persists, you can optimize Internet Explorer.
See the link below for more information.
How to optimize Internet Explorer?
http://support.Microsoft.com/kb/936213
b. If nothing works to solve the issue try reset Internet Explorer.
How to reset Internet explorer:
http://support.Microsoft.com/kb/923737
Note: After resetting Internet explorer you will need to install Java runtime library and Adobe flash again.
WARNING:
Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Problem with links to another Web page when using the Internet
I can open any website, but when there is another highlight link to another Web page I get an "Error on Page" message down to the left of the screen when I try to access it. When I point out this message, I get the message "no such interface supported." This is on a HP Pavilion dv 7-3173 nr notebook new. I use Internet Explorer 8 and the operating system is Windows 7 Home Premium. I have disabled the firewall without success and it occurs either wireless or ethernet connection. A typical error detailed message is as follows:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB0.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; HPNTDF; OfficeLiveConnector.1.3; OfficeLivePatch.0.0;. NET4.0C; BRI/1)
Timestamp: Sat, December 2, 2010 17:27:10 UTC
Message: No such interface took in charge
Line: 2
Char: 11896
Code: 0
URI: http://www.durabuiltbuildingproducts.com/menumachine/menumachine2.js
I would appreciate any suggestion or help.
Hello
Try to download and install Firefox on the link below and post back if you still have the problem by clicking on the links within Web sites.
Looking forward to hear from you.
Best wishes
DP - K
-
satellite 2410: problem with recovery CD
I had problems with laptop computer virus and decided to use the recovery cd
At the end of installation, I get the message extraction failed and that there are currently no operating system on the laptop.
How can I fix this problem?
Hello
check the BIOS settings? Turn on the laptop and immediately press the ESC key, load default settings and change the CONFIGURATION of the DEVICE to 'Installation of the OS' and try again!
Second step: is your CD ok? Is there anywhere a scratch?
Hans Bye
-
Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to another folder. All known solutions?
This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?
The 'list' of relevant articles that I know, they are now
-You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last
Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous
Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac
If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support
Leave a post by: ChitlinsCC
-
I have a desktop running Windows 7 PC. I recently had problems with loss of internet connection. When I have trouble Shooting, told me that impossible to find a driver. The adapter does not appear in Device Manager. Help!
Hello
Definitely looks like a problem with the network device. Check with sound
Support, their books online, the drivers and ask in their forums (if any)
on known problems. If there is a control of the device shipped with the system
Manufacturer (manufacturer of motherboard for customized systems). If a device check separated
with the support of its creator and other resources.You could also remove or disable the device and try a new add-on as one
new card or device USD. None of those who are dear.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Having a problem with Windows Live Mail lock up shortly after the start.
Having a problem with Windows Live Mail lock up shortly after the start. When I start the Task Manager to end the process, it sometimes freezes and the only way to solve the problem is to disconnect which forces the profile to close. Assuming a corrupted profile, I followed the instructions of Windows support to fix a corrupted profile and copied all the files except ntuser.*. When I try to paste them into the new user profile (all profiles are admins), I get the error message asking if I want to leave to proceed. When I click on continue, all THE files in the profile block "corrupt" to the new one, including ntuser.*, that I was not choosing. Why? If the files are rewritten empty? Tried 3 times, same result. Please notify.
I think I found it! I went in the Windows Live Forum and found a thread that looked like my problem. He suggested going to msconfig and take off Live Mail list start. I couldn't find it on the list, but the top element was "" default EXE"something of an unknown manufacturer. I took it out of the startup list, and Live Mail works again! Thanks for your help!
-
Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation. So I tried a full install without success. Can you please give some tips to overcome this problem? I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD. Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.
I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:
You can download it from there and use your product key to upgrade:
http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only
You will need to reactivate by phone:
Activation of the phone:
1. press the Windows key + X , and then click run, and then type: slui.exe 4
2. then press the ENTER"" key.
3. Select your "country" in the list.
4. choose the option "activate phone".
5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
6. explain your problem clearly to the support person.
-
Problems with Windows 10? How can I reinstall the Fireworks - missing MSVCP100.dll?
First, run the SFC Scan command and try to reinstall Fireworks:
https://support.Microsoft.com/en-in/KB/929833
If you still face, same question,
Uninstall and reinstall Microsoft Redistributable packages versions 2013 and 2012.
Let me know if you need steps.
-
Problem with El Captain (5.1.7 server) and the management of permissions
Hello world
I have a big problem with our Mac Mini Server (El Captain) and the server program.
In recent weeks, the server didn't give the permissions of a folder.
for example:
Mr. X had permission to read and write to a folder.
Mr Y too.Mr. X has create a new folder one record something in it.
Mr Y had the permission to read or write to the folder create Mr. x. But he should have.
Or
Mr. X has save a file to a folder
When he opens it again it is write protected and cannot be replaced.
So you have to save under a different name in the same folder.
And every time he save/close the file.
Anyone know what could be the problem?
Thank you
Greetings from the Germany
Chris
My guess:
A few weeks ago someone messed with the permissions on your server and made a mistake. So, you got an inappropriate list ACL (Access Control), which is rampant in the file and must be removed or fixed.
C.
-
How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3Given a PC without hard disk...How can you use a flash drive instead?So, indeed, the USB key works as an SSD...I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...None of these options are acceptable in the circumstances.It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...Thanks for any help.
You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).
J W Stuart: http://www.pagestart.com
-
I'm having a problem with my Windows Vista operating system. I have a Toshiba Satellite A135-S2376. Problem started on 19 February 2011. Computer continues to display Windows Explorer or Microsoft Windows has stopped working messages. Cannot run all programs, sharing disk cleanup, System Restore. Cannot download IE 9. Help, please! For example: tried to run MP3 Rocket he was trying to load & then a message appears at the top that States platform Java cannot run or something to that effect. Basically, I can't run any program that needs to use Microsoft Windows.
Hello
You can try to do a system restore before this date
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
and malware scan
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
Someone else has problems with their computer crashing once they have installed the Nik for Photoshop CC filters?
Hi amlportraiture,
Could you please let us know the exact version of Photoshop you're working on, also did you copy the Plugins and move it to the folder Plugins in Photoshop?
And please make sure you have the latest version of Nik Collection Installer on the computer.
Kind regards
Tanuj
-
No response to my problem
I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message!
!
Maybe you are looking for
-
When I open iTunes on my Mac it occupies the entire screen (literally) how to return to the usual pls?
-
Ultiboard make printer laser method
Hey guys im new to this program. I got a diagram, transferred to ultiboard, autoplaced and routed automatically. I have some problems. One I want to use the method to fabercating the real jury laser printer. When I'm putting my copper layer on the to
-
It's a printer Epson SX130.
-
Pavilion dv4 recovery DVD is not recognized at startup
I made a set of 4 HP recovery assistant recovery DVDs when my PC was brand new, and now I want to fix the system (after the failure of the CMF to repair files). However, I get an error of 0xc0000255 at startup (everything has been already verified as
-
8 GB Sansa Clip + ' not enough space...» »
Hello I wanted to use this drive with linux, so I put the Canada Meteorological Service USB mode. With linux, there is only 2.8 GB of free, so I formatted the drive (SanDisk support info). Then I load 5 GB of MP3 files on the drive (with the Midnight