Z3100: Designjet Z3100 seems to work in Windows 10 (64 bit) with Windows 7 (64 bit) driver, but not quite

Following the previous advice from the community on Z2100 drivers for Windows 10, I installed the Win7 driver for my Z3100 and all seemed well until I tried to turn on Application managed color - it seems that it works, but when you close and reopen the installation of the printer, it goes back to Priniter managerd. A similar effect ooccurs with ICM. It seems that it is a consequence of the use of a driver Win7 in Win10 and so basically I can't use Photoshop or the Qimage for driving my printer more. Does anyone have any suggestions? Thank you very much

Hello

Changes to the print made from the application preferences are temporary.

To default setting, go to devices and printers, click with the right button on the printer and select Printing Preferences. Set your default values and click ok to save.

Tags: HP Printers

Similar Questions

  • How can I make my printer Brother HL - 5150 D work on Windows 7, he said: it is not compatible and I cannot make it work.

    How can I make my printer Brother HL - 5150 D work on Windows 7, he said: it is not compatible and I cannot get

    Microsoft has decided to change the "internals" of "device drivers" how to "interface" with Windows and devices.    If the material does not have a driver for Windows 7, it's a 'result' of the device 'manufacturer' is more "willing" to support the older device.  Microsoft does not have drivers for Microsoft not branded device.

  • of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

    media center ehshell.exe received the error message 205 units

    of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

    After you have installed the XP SP3.

    How can I fix this error.

    Media Center worked fine until I installed SP3.

    Hello

    I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

    Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

    (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

    (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

    (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

    (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

    If the problem persists, follow these steps:

    You try to run the following commands to re-register all Media Center services:

    (a) close Media Center

    (b) click on the start menu, choose run and type cmd , and then press ENTER.

    (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

    · Regsvr32.exe atl.dl

    · C:\WINDOWS\eHome\ehl Sched /unregServer

    · C:\WINDOWS\eHome\ehSched/service

    · C:\WINDOWS\eHome\ehRecvr /unregServer

    · C:\WINDOWS\eHome\ehRecvr/service

    · C:\WINDOWS\eHome\ehRec.exe /unregServer

    · C:\WINDOWS\eHome\ehRec.exe/regserver

    · C:\WINDOWS\eHome\ehmsas.exe /unregServer

    · C:\WINDOWS\eHome\ehmsas.exe/regserver

    · Restart the Media Center

    Hope this helps and let us know if you need more assistance. We will be happy to help you.

  • of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

    After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

    What I would do.  I was grinding a lot and nothing has worked so far.

    Stone

    Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

    1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

    2 a Norton or McAfee application ALREADY installed on the computer?

    3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

    4. why has not been installed SP3 years?

  • Driver Iomega for citizen Floppy more works for floppy drive, but not for memory cards.

    Original title: HELP?

    Driver Iomega for their citizen disk more.  Œuvres for floppy drive, but not for memory cards. CF/Micro drive.  He is listed, but does not work.  Any suggestions?    use of PSE * address email is removed from the privacy * got here but don't know how.   Thanks in advance.  PS Lost the cable to use this method.   Best regards 73 or 88

    Hi Leon S.Dorr,

    You can get in touch with Iomega support to get the correct drivers for the card reader.
    https://Iomega-na-en.custhelp.com/app/answers/detail/A_ID/14408

  • My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

    My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

    Try to reset your preferences using Cmd (LTRC) - Opt (Alt) - move when restart you the version of AI. Did you once two monitors?

  • My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

    http://support.Microsoft.com/kb/314060

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

    I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

    Hi @Sajapand @ddegan

    I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

    Most of the products have updated software available on the HP support Web site for Windows 10.

    I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

    HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

    Do you know if you are able to scan using paint?

    To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

    (This is the same for Windows 10, of what I said)

    1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
    2. Click on the painting in the results.
    3. Click fileand then click on from a scanner or camera.
    4. Select your printer, click OK, and then click Scan.

    Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • Windows 7 updates will download but not install... Help!

    Do you think I should do a clean install of Windows 7?

    Well, it would certainly solve ALL your problems, for sure. Your call. If you decide to do so, follow the instructions in the REPLY message in this recent thread: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/bc95f2f0-7968-4bd0-8de5-70b83db31fa6

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

    I'm running Windows 7 x 64. My computer was initially using Vista. Some time ago, I upgraded my Dell XPS M1530 to Windows 7. I use Microsoft Security Essentials. In the last month I was able to download updates of Windows. I get the following error codes after the installation failed: Code 80070643 and Code 80071 A 91.  There are currently 13 important updated that I can not install it:

    KB2416400

    KB2296199

    KB2305420

    KB2385678

    KB2423089

    KB2436673

    KB2442962

    KB2447568

    KB2467659

    KB2388210

    KB977617

    KB981981

    Yes, I have the same laptop accurate, OS and errors. Nothing seems to work. Help?

  • Windows 7 powering off randomly, but not when you use it.

    Hey all,.

    Having a strange problem where my computer behaves quite normally when I use it, but when I stop, it will often (maybe half the time), stop at random. I don't know how long it takes - in one case, that he died in about 20 minutes, but again, he ran for more than 8 hours. This is a new installation on a new hard drive, but the rest of the machine has been about and works well for several years.

    A few things I've tried - (plan) event viewer shows no consistent event prior to the shutoff valve. They are all still "Information" rather than "errors" or "warnings". After I turn it on again, I have a 'mistake' telling me that the previous stop valve was not planned, so I know that the machine does not turn off. In some cases, I have entries in the newspapers of the applications that have been dated later system then saves, but that doesn't tell me much.

    I have an ASUS motherboard so I was check the temperature of the processor, they never seem to cross as 50 C (and besides, when I use the machine never turns so overheating does not seem likely). I have installed the hard disk Sentinel to control the new player, but the health of disks are all 100% (I have an old drive to 40%, but there is no file system on that). I am running MSI Afterburner to check the graphics card, but the fan seems to run and off properly so I don't think that.

    This dual computer starts in Linux, and the problem has not yet arrived there. Although, I do not often use this partition, so I can't guarantee it is independent of the operating system.  I reinstalled the RAM once and done little compressed air works for the computer is clean enough. Since the system is pretty cool, I did all the updates, but all those recommended are made, I have only those in option on the left.

    Does anyone have any advice on how I can follow this problem? What kind of logs could be able to use or what kind of tests might be appropriate?

    EDIT: File system asked (I tried to make sure the cursor thing, but I didn't know exactly which part of the window, I wasn't supposed to to move on).

    System Information: here

    Observer of events (System): here

    In doing so, for the sake of future questioners... I found the answer.

    run

    Powercfg.exe /Hibernate

    Apparently, during any day or something, hibernate gets broken. I mean, I turned it off in the menu, but that apparently is not doing the job. Power of was to run it as admin, but anyway, the problem seems to have disappeared.

  • Dell XPS M1530 Windows reinstalled Vista, network driver does not

    Hi, I had to replace the hard drive on my Dell XPS M1530 because of the complete failure of hard drive.

    I installed Windows Vista and also installed all the drivers from Dell. All of them seem to work fine except the driver of Ethernet controller and wireless adapter one. I tried to download the drivers from Dell Web site, but who moved it - it comes up with this message: "the device could not be detected. Installation interrupted.

    In other words, that I can't connect to the internet, so using computer for a friend right now. Is there a driver I can download to make it work?

    Hi, thanks for all your suggestions. I tried to look at all the possibilities in terms of manually install the drivers, but nothing has worked.

    So in the end I bought a USB key external wi - fi and with that, I managed to connect to the internet. Once connected, the laptop must have then auto-téléchargé the right driver for the internal modem, because a few days later, I managed to connect to the internet even without needing the key external wi - fi.

  • Windows 7 available in Portuguese, but not in English?

    I'll start from the beginning. I have a mac. I want to do a bootcamp with windows installation 7. Windows NOT 10 or 8. Honestly, I would consider trying to install bootcamp with XP before either of these goofball operating system.

    UM. I attend University, and they have provided me with a product key for work for windows 7. I went to the location to download here: https://www.microsoft.com/en-us/software-download/windows7

    Now, this is where the problem arises. As soon as I get the product key and click on check, a menu drop-down opens and asks me to choose the language. For some reason, the English is not available. Not even Spanish, which I know a little, or french, with which I'm also vaguely familiar.

    So I'm stuck download the Portuguese version of windows 7. Here's how you can help. Provide me with instructions on how to convert the Portuguese version in English, or give me a link where I can transform my .iso file activation code windows 7 genuine.

    Thanks in advance for not to recommend Windows 10.

    If you got the product key from your University, then you should be able to download from your university network. Product keys issued by the higher education institutions are generally MSDN-AA (academic) or Volume License customer MAK licenses.

    Try the following work around:

    Step 1: Download a copy of Windows 7:

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

    How to: perform a customized Windows installation

    Step 3:

    http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  • No sound, Windows audio services is 'Automatic' but not 'started '.

    My PC runs Windows 7 (Vista upgrade) has a sound card, downloaded the newest manufacturer of PC sound card driver.

    Using "services.msc" and then found Windows audio services is set to "Auto" but not "started".

    Then click on this point, a new window appears which does not have a button 'START '.

    After pressing 'START' and then he said "failed to start audio service of windows on a local computer.

    "1068" error code

    ===========================================

    There is a program that can fix it: but do not know how much it costs, and if it works.

    Thank you

    Skip

    PS: I forgot the the 'password of the administrator", I bought this computer and I'm the only one using this computer.

    The suggested solutions for trying, shouldn't the password, because I won't be able to try.

    Update: tried "System Restore", he said that the system restore does not work correctly.

    I've been using other computers within the home and have not used this computer for a long time after the upgrade from Vista to Windows 7.

    There are a lot of suggestions, I tried it (suggested by someone here). :

    Define 'multimedia class Scheduler' to 'automatic '.

    Set the 'Plug and Play' to 'automatic '.

    Restart the computer, then checked "Windows Audio services.

    now, he says "Started" and "automatic".

    It works fine now.  Sound is back.

    Thank you very much.

    Skip

  • HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

    Hello

    HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

    Now what can I do to get this printer to work?

    I solved this by using Windows update, which then installed a driver in the end.

    This was not a great experience.

    Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

    Not good PR client on any level.

  • Why ask Windows xp password when sleep, but not at startup

    Windows xp 2002 teacher sometimes ask password, that is to say, when he's sleeping. but not at the start. I want to ask him all the time?

    Go to this article:

    "How to turn on automatic logon in Windows XP"
      <>http://support.Microsoft.com/kb/315231 >

    It tells you how to enable this feature.  To disable it, go to the section "Let me difficulty it Myself ' and follow method 2 except insert a check in the box"user must enter a username and password... ". "instead of delete.

    HTH,
    JW

Maybe you are looking for

  • iPhone sound problems 7 more

    last night my iphone sounded as if he had a short... Crackle sound during video playback in FB app and its video game if kept order.  switched to music app and a few minutes in this same thing has happened... someone had the same problem?  belong to

  • Satellite L10-205: need of product recovery CD

    DEAR R2D2 Will you help me by sending a recovery CD product for this system of L10 - 205. I'll be very grateful to you if you are Basel for this Asim

  • HD filled too fast

    I am running XP SP3.I have a HD 500 GB that I cloned a 160 GB HD on. After a few weeks he filledindoor ~ 11 GB of full. With the help of SequoiaView, I found a directory named "\R_TFXBp4oklklD!z+C".who said 76.4 GB. It contains 365 files 216 MB each.

  • You cannot change the appearance and color of the taskbar

    Original title: appearance I don't really know how to explain it, but I have windows vista, and I can't change the appearance, because he seems to have returned to the base? On my guest account, it works, and I can change the appearance and color of

  • Future of the Tablet OS SDK for Adobe AIR

    It has been months since the last update to the AIR SDK. With all the excitement surrounding the NDK, I'm starting to think I may need to re - write my application from scratch to have access to the PB magnetometer and gyroscope. I'm no expert air bu