Z5 compact touch acting weird

Hi all

I just got my couple z5 days and already I have a problem with my phone

when im trying to type a msg and I press a letter (lets say I press S once) the phone it will record as this sssssssssssssssss

and it doesn't stop... If I use facebook I can't scroll down, because every time I try it will enter each message or photo

I also have a little recording of some of my problems where I have to press several times before the phone wants to do something

https://www.YouTube.com/watch?v=ddfC30WEm2E&feature=youtu.be

NEW VIDEO https://www.youtube.com/watch?v=jusF9pr8oX4

If I lock the phone and open again the problem disappears for a while and it happens again if I use it for a little

I don't have to reset/reinstall the phone... same problem

I just received information that this will be fixed in a future software update which is scheduled to begin deployment in the middle of April 2016. Please note that the software updates are published at different times according to the operator and your country.

Tags: Sony Phones

Similar Questions

  • My iphone more than 6 s has acted weird since lately I have droped my phone there extremely overheating amd battery was fast draining. Not even in 5 min my battery goes

    My iphone more than 6 s has acted weird since lately I have droped my phone there extremely overheating amd battery was fast draining. Not even in 5 min my battery goes from 100% to 95%

    Take it to an Apple Retail Store for diagnosis.

  • iPhone 5 s acting weird from the hotmail interface has changed

    Hello

    My 5's mail app iPhone acted as weird as the hotmail Web site interface has changed a few weeks ago. The Junk folder disappeared and now, when I get an email, the phone rings and vibrates as before, but it is there no preview on the lock screen, or the notification Center.

    What is happening to someone else? How can I fix it?

    Thank you

    Hello

    It can help to check your email notification settings:

    • Go to settings > Notifications > mail > select an account to check the notification settings.

    You can also update your iPhone to the latest version of the software (your post indicates that it is not up-to-date):

  • mouse acts weird on Windows 10 when it is connected to the monitor extern

    Hello

    I have a weird problem, when I connect my macbook pro to an external monitor. I am running Windows 10 Pro. The problem only occurs when I close the lid of the laptop. The mouse starts to act up, it applies random clicks. Have more strange is that it stops after 5 minutes or so do. However, if the cover is open and I'm working on two screens, then it is normally.

    Do you have an idea where to start go if I want to solve this problem?

    Thank you!

    You should probably ask at the Microsoft support site.

  • Trolling, laptop screen drivers acting weird, Windows start very slowly

    The screen of my laptop had finally died recently, so I took it into the store of the computer down hence my apartment is. Real easy, just put in a new screen. I have my laptop back and the screen is fine now, but since I found, he acted very strange. Any time I did scroll upwards or downwards, or move a window, that it is delayed and there is this weird wave effect. That I can't plug my laptop go back to my TV via HDMI, and now I can't play Lord of the Rings Online. I tried to install a video driver via Steam for the GeForce Go 7400, and now it takes about 10 minutes for my computer starts after scoring in windows. I'm not really sure to know how to find the specs and everything, but if someone could help me I would be very happy.

    Hello.

    Check the site of laptop manufacturers with regard to the specifications of the machine you.  Look at what graphic chipset provider is. He must check if it is nvidia.  Go to their site and download the latest drivers.  They have a program online to find the best driver for your system.  Download it, and if all goes well, this should you solve graphical errors and restore your HDMI.  NVidia will direct you ensures the latest driver package and complete for your machine.

  • Xperia Z3 Compact - touch screen unresponsive

    My Z3 Compact went completely insensitive to touch controls.

    I have read other messages and followed the instructions for PC Companion-implementation to date - repair, but without any change.

    Since the touchscreen is insensitive it is not possible to boot in safe mode. The only operational functions are cable power switch, the volume buttons and the camera. All that requires the operation of the screen is impossible, and I'm now trapped in the "language selection" page, unable to make orders.

    The phone was working perfectly and then without being abandoned or badly treated in anyway simply stopped working.

    It seems the only option now is to return the phone for repair or replacement, is - that correct?

    Hello

    If you have tried a repair of software without change, I recommend that you get your phone reviewed by a technician at your nearest authorized service center. I suggest you contact your Local support for more information on how to proceed with this.

  • Clone tool of the photoshop2015 acting weird

    Hi, I have a problem with my clone tool stand in the latest version of photoshop.

    It seems that there is a kind of the flow setting out there that makes meet weird. When I am trying to clone areas, its too intense and unpredictable in how paint in the area.

    the tool has changed in the latest version? What can I do to make it react more as it did in earlier versions of photoshop?

    Hello

    In fact, I don't have what goes wrong.

    You can try this

    To reset a tool, you must first have the selected tool. Then Ctrl-click (Windows users: right click) the button tool preset in the Tool Options bar.

    When you click this button, you will see a small menu and you can select Tool Reset to reset the current tool to its default value or reset all tools to deliver all the tools to its default value. Once selected, the tool will act as the first time you have used it.

    Using this simple method to reset your tool with a single click, you can quickly remedy any situation where the tool does not correctly and to maintain the flow of creativity going.

    If this is useful is fine, otherwise it would really help if you can please share a screenshot of the same thing.

    Concerning

    Jitendra

  • Blue/green lines acting weird

    Until recently in AE my blue and not green lines acted as they would normally and it raises all sorts of frustration for me.  At first, I thought it was just my new project, but then I started to open old projects allowing to behave normally, and now they are weird acting just the similar new is clearly a problem that happens throughout my AE software not just my project.

    I'll open a project the RAM Preview button click and it takes about 4-5 minutes to load the green line for a film which is 4 minutes and does virtually no animation inside or effects, then the movie will begin playing automatically as it is supposed to when it ends the caching for ram, but THEN! I look forward and noticed that the green line is only at half way through the film so it really only cached in the first half of the film. So, I put paused and then click ram preview again and all executives who have been just cached to ram disappeared (there is no more green line where I waited just 4-5 minutes to get cached) and the green line, which was all throughout the first half don't not turns blue when I try to see it go in the same place It disappears completely.  THUS, it acts as if it is no longer chached RAM or even the drive!  Just the fact that it stops at half way through and behaves as if it cached the entire film (starting in the RAM Preview) is also just weird and proof that something is wrong.  This will happen again and again in different forms or another.  Basically, it's just unpredictable and I can't find a model in the problem then it makes it even more impossible to deal with.

    Any ideas on the issue?

    P.S. I noticed when I changed the RAM Preview FPS in a project, he changed the FPS in RAM Preview for each of them. Is there a way to make sure this does not happen and there just specific to this project?

    You can create presets for animated in After Effects text effects and use them in first with customizable text in FIRST! This is a nice new addition to the Creative cloud software and looks that would be perfect for someone in your position. How to create patterns of text for Premiere Pro | Tutorials Adobe after effects CC

    The majority of your video clip of work would be done first.

    First works such as iMovie did because they have two video editors (or NLE - non-linear editors). They work with a video stream. This is different from how AE, Nuke and other software compositing - located on full frame, without compression information in pixels. There is a long explanation why you probably don't care, but hope this short helps. The Adobe team is working on this repetition how AE works that will make the preview to be a little more faster/better in the future, but it won't always be like a NLE.

    Now, lyrical videos would probably do for most in AE. But the good thing is that you don't really have much in AE - just a small piece at a time to listen to samples. Set your work area and create a RAM Preview (half brothers, probably). In addition, an important tip in AE, you can press on the. on your keypad and AE will play an audio overview. During the preview audio playing, press on * on the numeric keypad to set markers. If a layer is selected, it will be a layer marker. If no layer is selected, it will be a composition marker. This is a convenient way to appear outside of the audio timing to the AE.

    For each workflow, can help at this page: optimize for performance: Adobe Premiere Pro and After Effects

    And, if you are fairly new to AE, I highly recommend to get a solid base here: getting started with After Effects you'll probably know some of what these links, but I bet there will be many times where you'll be, like, 'OH MY GOSH; I do it the hard way all this time! »

  • Finder of freezing and acting weird

    Hi I had a couple issues Finder weird recently any help would be much appreciated!

    The finder drawing seems to freeze - can I open a folder or a new window of finder and sometimes it will be fine, but then it will be half freeze - the content of the window is not displayed - it will just be white or the background (desktop etc) is drawn in the finder window. I screen shotted because it's a little hard to describe...

    It seems to go there I kill finder / restart for 2-5 minutes... then the problem comes back.

    I deleted finder prefs, doesn't seem to help. I did a reboot in recovery mode and ran the repair disc utilities and which seem to help for a few days, but now back!

    I can close the windows in the finder and open new, and the question seems to come and go a little... Any ideas?

    Thank you

    Stuart

    Hello

    Start Safe Mode removes the system caches that can help.

    Follow these steps to start in safe mode.

    1. Start or restart your Mac.
    2. As soon as you hear the startup tone, hold down the SHIFT key.
    3. Release the SHIFT key when you see the logo Apple appears on the screen.

    After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

    To leave safe mode, restart your computer without pressing any keys during startup.

    Then, try the Finder.

  • What happened to the version patches-new organ is acting weird bug

    IMAC 2.66 GHz Intel Core 2 Duo 4 GB. Recently updated to OS 10.11.6 and Logic Pro X version 10.2.4. Have had all kinds of strange things going on acting buggy. Is to assign a piece for organ, but impossible to find patches of organ in what were before upgrade. I downloaded all the sounds of the relevant library. What is going on. We will have to wait for another upgrade? should I go to backup and reinstall the older versions?

    Thank you

    IN the Inspector - watch the channel bandwidth and make sure that the blue triangle is up next to the insert for the instrument. If it's not - click to the left of the insertion to move there. This sets the context of what the library shows.

  • Does "compact folders" Act on all or only on the current account?

    I wonder if I need to go to each account and compact, or just do it once.

    Depends on where go you.
    It is my understanding that if you select Compact from the file menu drop-down it's all records.
    Selecting folder, in that you are in fact right click menu.

  • Lenovo ideacentre AIO 700 mouse jump, screens acting weird and closing randomly

    Can anyone help, just recently, my mouse has become virtually unusable, and when I can get internet or documents to launch they become magnified or close altogether... it's driving me crazy! McAfee is running and the downloads are updated. Uninstalling the drivers of mouse and key board and even disconnected the USB wireless does not stop random circular ping on the screen - what can I do?

    Finally figured it out - disable the touch screen in Device Manager and all returns to normal - do not know what was the problem with the screen touch, but who cares I have my office back.

    Lenovo support and help desk not easy of access or to get a good sense-shame it's so hard... but the good news all sorted!

  • Loop simulation acting weird

    I wonder if there is someone who could give me a helping hand with a simulation, that I'm running. I am trying to simulate the behavior of a system modeled as state space and do a controller using different techniques, but I'm having problems and can't advance too far... It seems that the simulation loop gets on a sort of infinite loop and he can't stop but I don't know what else to do... Left, I enclose the block diagram of one of the screws simulation I so could someone there watching.

    It is a model of an inverted pendulum system and a cart modeled as state space and try to see the behavior of a placement of pole due to a pulse controller imput. Initially, I would check a model no length I have but it was too weird so I replaced it with the linear model to the point of unstable equilibrium, but the VI stuck too then I felt motivated to post here.

    (I tried to join the extract by using the code below, image generatin capture tool so you can download and run the code, but it's my first time using this tool, so hopefully it will work well... I created the extract .png and gasket here using insert image... that is right? )

    In the Simulation node, shift registers could have different behavior which would explain the problem that you run in. So, if you want to 'break' the feedback node (which in general, you shouldn't need to do), then use the block of 'memory '. He'll try to behave as you would expect.

    In addition, you can look at the example of shipment for the linear simulation:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2014\examples\Control and Simulation\Case Studies\Mechatronics\Inverted Pendulum\Linear inverted pendulum Simulation.vi

    Or non-linear simulation:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2014\examples\Control and Simulation\Case Studies\Mechatronics\Cart-Pole\CDEx Cart-pole control and Simulation.vi

    as a reference for your example. You notice even reuse the animation for your application.

  • The ripple for BB10 acting weird (Chrome).

    Weather, I try with my simple application (grid image list: 1 row, two images) or with samples of bbui.js, the rendering of the ripple is really weird. Sometimes I can view only the background, sometimes the grid makes. No matter how many times, I hit the Refresh button (or re - submit the URL) or the fact that I clean the cache. I had some relative success by changing the buttons on the right top ("cross domain" & options 'theme'), but this isn't a viable solution (and my alpha is brick... ).

    Config:

    W7 ultimate update

    Chrome 19.0.1084.56 m

    Java JRE: Version 6 Update 31

    Latest Webworks BB10 and ripple (UI 0.9.6 / build & deploy 0.9.5).)
    Oh: Regional FRENCH (May this interference?), pages below are encoded in UTF - 8.

    Since this is also with original samples, I have not this is my simple application that is the cause... but in case of...

    Config.Xml

    
        http://www.w3.org/ns/widgets" xmlns:rim="http://www.blackberry.com/ns/widgets" version="1.0.0.0" rim:header="MorfGPS">
        MorfGPS
        GPS and utilities App
        
        
    
        
            
        
        
    
        
        
        
        
        
    
    
    

    index.htm

    
    
    
        Golf de xxx
        
        
        
        
    
    
    
    

    Http://www.sigling.is/IMO/imofishing/home.htm

    
    

    Also, an inspection running, I noticed that divs are hidden... Would this average ripple cannot detect Alpha & WW 10 settings (which are properlu in the upper left area)?

    Here are also ripple in Chrome on the platform says:

    Version: 1.0.0.0
    Platform: BlackBerry 10 WebWorks
    Device: BlackBerry 10 Dev Alpha
    OS: BlackBerry 10.0.4.178
    Manufacturer: Research In Motion
    Screen: 768x1280
    Density: 355 PPI
    Browser(s): Webkit
    User Agent:
    Mozilla/5.0 (BlackBerry) AppleWebKit/536.2+ (KHTML, like Gecko) Version/10.0.4.182 Mobile Safari/536.2+
    

    OK, thanks for the track Tim.
    Once I saw the double alert, I thought that it might be iframes. There is!

    So if you have the same problem: right-click in the Simulator screen, then select "refresh the FRAMEWORK.

    Accuracy 100% for me. (then; script alert is "Mozilla/5.0 (BlackBerry) AppleWebKit / 536.2 + (KHTML, like Gecko) Safari Mobile of Version/10.0.4.182 / + 536.2 ' IE: the proper browser - I guess - detection devices).

    Back to dev!

  • Cancel order acting weird with speed

    Hi guys

    After the update of CC 2015.3 things looked weird side first. One of the things I noticed is that when I use the extensible tool tariffs or Ctrl-r on a clip (for example, I do a 100% to 50% clip) and then try to undo (ctrl + z), editing, creation only changes the length of the clip at the scene previous. not the speed. therefore, if the clip is finished, first extend the clip and the clip has diagonal lines indicating the absence of sequences. Undo not only revert to the previous speed.Screenshot.jpg

    Also, when I try to restore to the Quicktime Format > H.264 at 10000 bit frequency settings appears extremely pixelated video quality, but if I restore to the H.264 format to 10 Mbps in target bit rate quality looks in good condition. This Quicktime rendering parameters were very good in CC 2015.

    My third question is when I try to export an outing with CUDA renderer on export stops at halfway. But if the rendering engine is tilted with the software only, the output is very good.

    Please help me with these questions! Thanks in advance

    Undo works do not is a known bug: wait for the update.

Maybe you are looking for