Z5 (E6653) restarts when wake up from "deep sleep".

Similar Questions

• Intermittent freeze, to wake up from deep sleep, occasional prohibitory sign at the start

  I have a MBP mid-2012. I recently had problems with a sign prohibitive blinking at startup but it would still proceed to start the operating system very well. I recently tried a clean install of El Capitan only to see that the problem was MUCH worse. After several new installs of El Capitan and Yosemite attempted to boot disks as well as on top moved after the recoveries of the internet, I have not solved yet completely the problem. I also tried to reset NVRAM and SMC.

  Currently I'm running Yosemite and have restarted, there 3 or 4 times without prohibitive side. I didn't let her go to sleep so I don't know if this problem persists. I always get a casual beach ball, but the computer is still sensitive semi. i.e. finder will be insensitive and programs won't load, but I can still move between open programs. This usually takes between 10 and 30 seconds. Occur less frequently in low demand.

  I'm afraid that my hard drive is failing, but I don't have any other evidence to support. I also heard that the sata cable could also be faulty. Is there something else that is maybe I should check/perform before ordering new parts? Is there anyway to check if it is really the reader or cable? The problem is not consistent and hardly repeatable. But it is quite common that I need to fix it. Also would like to have at least the option to upgrade the operating system one day.

  Thank you

  You could try the operation of an external device, to see if it could be memory or some other component.

  Beyond the diagnoses of Apple, please communicate with the folks at Apple Support or the folks at the local Apple Store Genius Bar and see if they will look at the Mac and you get an estimate of the repair.      Otherwise, you learn how to dismantle and to diagnose and repair...

• iMac guard to wake up from its sleep!

  Hi people,

  My iMac guard to wake up from his sleep at random intervals, sometimes after a few seconds after sleeping.

  This is the Console log, I took immediately after waking up:

  27/06/2016 18:38:13.933 cloudfamilyrestrictionsd [9909]: CFRPushManager: link: didChangeConnectedStatus: 0

  27/06/2016 18:38:13.939 identityservicesd [7059]: IMMacNotificationCenterManager: 0x7f89149142d0 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7f8912d054a0 {name = _NSDoNotDisturbEnabledNotification}

  27/06/2016 18:38:13.950 identityservicesd [7059]: IMMacNotificationCenterManager: 0x7f89149142d0 >: NC disabled: NO

  27/06/2016 18:38:13.957 identityservicesd [7059]: IMMacNotificationCenterManager: 0x7f89149142d0 >: DND enabled: YES

  27/06/2016 18:38:13.957 identityservicesd [7059]: IMMacNotificationCenterManager: 0x7f89149142d0 >: update enabled: No. (subjects: ())

  ))

  27/06/2016 18:38:59.827 identityservicesd [7059]: IMMacNotificationCenterManager: 0x7f89149142d0 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7f8912c55b00 {name = _NSDoNotDisturbDisabledNotification}

  27/06/2016 18:38:59.836 identityservicesd [7059]: IMMacNotificationCenterManager: 0x7f89149142d0 >: NC disabled: NO

  27/06/2016 18:38:59.843 identityservicesd [7059]: IMMacNotificationCenterManager: 0x7f89149142d0 >: DND Enabled: No.

  27/06/2016 18:38:59.843 identityservicesd [7059]: IMMacNotificationCenterManager: 0x7f89149142d0 >: update enabled: YES (subjects: ())

  "com.apple.private.alloy.icloudpairing,"

  "com.apple.private.alloy.continuity.encryption,"

  "com.apple.private.alloy.continuity.activity,"

  "com.apple.private.ids,"

  "com.apple.private.alloy.phonecontinuity,"

  "com.apple.private.alloy.phone.auth,"

  "com.apple.private.alloy.keychainsync,"

  "com.apple.private.alloy.fmf,"

  "com.apple.private.alloy.screensharing,"

  "com.apple.private.alloy.maps,"

  "com.apple.private.alloy.thumper.keys,"

  'com.apple.private.alloy.continuity.tethering '.

  ))

  27/06/2016 18:39:04.959 sharingd [7068]: 18:39:04.959: server from release for user 503 on wake

  27/06/2016 18:39:07.313 cloudfamilyrestrictionsd [9909]: CFRPushManager: link: didChangeConnectedStatus: 1

  Any ideas why it continues to be?

  Thank you very much

  Adam

  Hi there, Adamskiodp!

  Thank you for joining the communities Support from Apple! I know how it is of course the computer is not important 'awakening to the top' at random times on its own. Without knowing what you have tried so far to solve problems, I suggest to try the steps in this article:

  If your Mac does not sleep or wake up when expected - Apple supports

  If your Mac wakes up suddenly

  Your Mac can wake up to these activities:

  • Network activity that uses the wake on demand. Examples of network iTunes sharing activity, sharing photos, printer sharing, file sharing and using back to my Mac.
  • Enhanced notifications of FaceTime, Messages and other applications and services.
  • Bluetooth activity. To prevent Bluetooth devices to wake up your Mac, choose Apple menu > System Preferences, and then click Bluetooth. Click the Advanced button, and then deselect "allow Bluetooth devices to wake this computer".

  Try safe mode if your Mac does not start-up.

  This boot can isolate issues on the startup disk. If these steps do not work, try the procedure described in this article:

  How to test a question in another user on your Mac account

  See you soon!

• Vista wakes up from his sleep by himself

  As the title says, my vista pc wakes up from his sleep by himself. Normally, he'll sleep for 10-15 minutes before you wake up. At other times, it is random and wake up in 2 minutes or 30 minutes. I looked in the forums of countless and tried the suggested solutions, but can not solve the problem. The only thing I found to keep him asleep is disconnected the network cable from the PC or unplug the network cable from the cable modem. I suspect some service or program he wakes up, but I have no idea of that. Here's what I tried:

  I used powercfg command-line command to see which devices have been enabled to wake up the pc. They were only the mouse & keyboard. They are all two peripheral cables usb. I unplugged each separately before you put the pc to sleep and he will still be awake. I use "last_wake" but I just get '0' and in the event viewer it says "wake source unknown.

  I made sure "allow this computer to turn off this device to save power" has been verified for the network adapter in the power management tab. I also disabled the option in the advanced NIC Properties. I also disabled it in the bios. After having done that and the pc wakes up is still what intrigues me the most when I don't know if I unplugged the NIC in the pc go to sleep for hours until I decided to wake up. It is wired not wireless.

  I have that 'sleep' lit. There are no hybrid sleep or hibernation available mode.

  It is vista business so I don't have a Media Center. Media Player is not enabled for sharing files on the network or to pick them up. Media sharing is turned off, and it's only pc's on my network. Also just in the 'media settings' box is configured to allow the pc to go to sleep in power options.

  I checked the Task Scheduler for tasks that can be set for 'wake up this computer' so it can work, but only one of them has this option. It's for multiple monitors and I unchecked the box and the pc wakes up still. I checked for hidden tasks, and the only one I found that could be the culprit was MS RSS. However, after the removal of this pc still wakes up.

  I don't have a sidebar option.

  Windows Update is set on notify me when updates are available.

  I also did a msconfig & selected 'selective startup '. I have uncontrolled startup programs. The pc is still awake.

  Tried to start the pc in safe mode, but there is no option of sleep available to test if it wakes you up from his sleep in safe mode.

  Last but not least is when the pc is wake up he's going to sleep again within 2 minutes.

  As you can see I tried everything I could think of without much success. Can someone tell me something again or that I have not tried?

  I have no idea what you're trying to do, but here's what I found my problem. I have a motherboard intel. Although I disabled "wake on lan" both vista & bios there was yet a 3rd parameter I was not aware of. He was set apart from the bios or vista. It is a framework of intel in the 'management engine interface' if I remember correctly. It is accessible after the bios option and before loading windows. Once I turned it off my pc stop, out of sleep. So, if you have a motherboard intel, then that is your problem.

• computer Dell laptop under Vista Home Basic are taking too long to wake up from its sleep. __

  computer Dell laptop under Vista Home Basic are taking too long to wake up from its sleep.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer wakes up from his sleep at night

  Hello

  I have a problem of disruptive reeally with my Windows 7 PC: he wakes up from his sleep to ~ 2 hours every night, I put it to sleep and it wakes up again between 3-04:00. Is it possible to limit this, or to diagnose what executable triggers this?

  Thank you
  Levi

  Windows performs many tasks during the night, including the work of backup, hard drives and other degragmenting.  These are usually the root cause of the alarms.

  You can begin troubleshooting by opening an elevated command prompt * and type powercfg /lastwake to see what woke up the last computer.

  * To open a command prompt, type cmd in the Start Menu, and then press Ctrl-Shift-Enter.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• HP Pavilion 13-a113cl: computer HP Pavilion laptop won't wake up from his sleep by the keyboard or mouse

  I don't know if it is good advice to post this question in, but I'm having the same problem with two a113cl-13 laptops HP Pavilion running Windows 10 Pro (64-bit). The issue has to do with the awakening of the machines to sleep using the key on the keyboard or the mouse. I'm not having problems with them to wake up from sleep using the button of power or when I open or close them.

  I checked the BIOS and power settings are not there. (Version of BIOS F.32)

  I have checked boxes to allow devices to wake the computer in the management section of power without success.

  I changed the Intel MEI driver with 9.5 instead of 11 which is usually installed without success.

  I don't know if there is a problem with the BIOS and Windows 10 or something driver associated. Any suggestions would be greatly appreciated.

  Hello @jpk717,

  Thanks for the information!

  Since you have formatted the drive, you must be unable to return to the old operating system, unless you use recovery media.  You can find your product here recovery media:

  USB - Windows 8.1 Recovery Kit 64B

  You can try to use the recovery media to install the original operating system and see if the problem is resolved.  If you choose not to go down this path, you can try to re - install Windows 10, using the media creation tool.

  I hope this helps.

  Have a great weekend!

• Clean disk and now cannot wake up from his "sleep".

  Hello

  Like many others I deleted some files that I wouldn't go for a drive clean and now when my laptop goes to sleep, he can't wake up, and the only solution is to re-boot your laptop.

  I have read many of the questions already asked and I already tried the guest "powercfg-h" method, but not luck.

  Very grateful if someone has an idea to try and fix.

  Kind regards

  Neil

  Hello

  There is a link that I gave you to scan files

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If you windows can not fix it, you should try to borrow a DVD of Vista from Microsoft

• Blue screen to wake up from the sleep and Hibernate in Windows 7

  I had this blue error message screen "kernel_data_inpage_error" to wake up from hibernation in wndows 7. I tried to reinstall windows 7, but the problem persists. Please advise the steps to solve this problem.

  Hi Zen81,

  Thank you for your message.

  I suggest to perform a clean boot to see if a startup program may conflict with the RESUME from hibernation/standby state:

  Clean boot

  http://support.Microsoft.com/kb/929135

  If you have no luck with it, you can test your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless power-press when wake up from sleep / restart windows

  Hi guys, help me please. my computer compaq CQ60 laptop have wireless problem. I don't know what is happening. because each start-up/reboot/wake sleep always must press the button power switch wireless... If not press him wireless not function event light is blue. before aready happen like that so I reinstall the windows problem solving. but this time I don't want to reinstall windows >.<.  thanks="" so="">

  Respect,

  Stepanus Lee

  Hello

  Try the following.

  Open windows control panel, open programs and features, right click on the entry for HP Wireless Assistant and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and reinstall HP Wireless Assistant from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe

  When the installation is complete, restart the laptop.

  When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.

  Kind regards

  DP - K

• Satellite U300 cargo stops when wake up from sleep mode

  My U300 has some issues loading. If I connect the charger mode 'sleep', then wake up the laptop it stops in charge, even if the adapter is still plugged. The battery icon says he's in charge, but the percentage of the battery decreases. And there is no warning when it hits empty, he just cut.

  I think there also the same when I'm in charge it execution state and then switch to hibernation. It does not seem to pay even if the adapter is still plugged.

  To be honest I never noticed similar problems with my laptop
  It seems very strange and here in the forum, we could provide only a few suggestions

  So first of all, it would be desirable to update the BIOS. The update of the BIOS sometimes makes wonders ;)

  What in the Vista update? Do you still run the update of the OS?
  From my experience, Microsoft publishes a lot of hofixes and fixes which corrects several different problems

  Last but not least, we should not exclude a hardware problem.
  In this case, the latter would be the ASP!

• Yoga 900 wakes up from his sleep when picked up by the short edge

  I want to show Aproblematique I had with my 900 Yoga to see if others have had similar problems.

  I discovered this when I put my Yoga, (who was asleep) in my backpack and then subsequently noticed he was awake. It took me a while to understand what was going on, but I finally decided that she had nothing to do with the backpack.

  My 900 Yoga wakes when picked up by the short edge (as I have done to put n my backpack). You can see in the video:

  Yoga 900 wake when picked up

  (BTW - I'm not press the laptop, I'm just taking it as it is necessary to pick it up by the edge.) Press the lid and there is a pressure on the rise on the bottom. It is the pressure on the lid which seems to be the cause of the laptop to wake up)

  Note that Lenovo has been great and sent me a replacement laptop. But I'm curious to know if others see this same problem.

  Is this a common problem with 900 Yoga?

  
  

• browser window is reduced when the computer wakes up from his sleep, must be enlarged twice to restore a window as large as the screen

  I tried to use the reset feature, but it does not work

  I'm not a function like the one available on
  AOL, which allows the "screen size and position" to be saved

  Operating system is Windows 7 x 64. Firefox version is 20.0.1

  Note: my problem has stopped since I expanded manually (instead of using the button to enlarge) the Firefox window to fill the screen

• HP Slate 21 Pro fails to wake up from its sleep

  Hello

  I had this problem and since I have my 21 Pro slate.  The device will sometimes fail to wake from sleep mode Android or HDMI / PC mode.  This happens when touching the screen to wake you up and when you press the power button to wake.  The power button to become white, but the screen remains blank.

  The only thing I found to resolve so far, it is to pull the power plug and start the unit up.

  Anyone else having this problem?

  The update of KitKat was finally released the HP officially.  It is implemented slowly but if you want just now follow these steps below. It should solve some problems.

  Now my 21 slate is the progress update to 4.4.2 try this step
  
  1 factory reset your slate 21 pro
  2. wait until it has finished
  3. After restart it, set up your slate 21
  4 put to update all your application on google game store
  5. wait util finished all updates
  6. open Configuration and update your slate 21 (it will be very long)
  7. now my 21 tab is updated... If all goes well there is no problem until it ends the 4.4.2 update
  
  Hope it can help you get 4.4.2 os.
  Kind regards.

• MacBook pro wakes up from his sleep since uptade

  My macbook pro 15 inches from the end of 2010 will not wake up after sleep since I've updated to the latest el capitan 10.11.5 system.

  The keyboard doesn't light to the top and rest of this way but the screen remains dark. Stop down and restarting is the only way.

  In addition, since upgrading my trackpad get slow sometimes and a click solves it. but its weird!

  any ideas? Thank you very much!!

  Could you please post an Etrecheck report? It is a perfectly safe way to give an overview of your current system: http://etrecheck.com