Z5 problems of Scanner double imprint

Hello

Scanner is very picky.  Sometimes it works, sometimes it doesn't.  Tried to register more than one using the same finger.  Tried safe mode.  Diagnostic test fails (does not vibrate) in normal and safe mode.

I bought this phone because of the fingerprint sensor (lots of sensitive commercial information in the phone), so I'd like to get it working normally.

Any suggestions please?

Yes, or you can consult this

http://talk.sonymobile.com/T5/FAQ/How-to-perform-a-software-repair/m-p/1061294#U1061294

Tags: Sony Phones

Similar Questions

  • Adobe, we are tired of you. expecially if you stole the money. I'm still waiting to solve the problem of the double charge.

    Adobe, we are tired of you. expecially if you stole the money. I'm still waiting to solve the problem of the double charge.

    Hello

    Sorry for the inconvenience.

    We see that you have an adobe account with e-mail and with the forums.

    Also I see that you are charged twice per month.

    I would kindly ask you do support adobe touch for the same.

    Contact the customer service

    * Be sure to stay connected with your Adobe ID before accessing the link above *.

    Let us know if this helps!

  • Satellite C660: problem with keyboard - double or missing characters

    Hello

    Last week, I bought my first laptop - a C660.
    A few days after I bought it, I noticed that he was typing double characters or completely miss the characters.
    Now, maybe it's that I'm adjusting to the keyboard, but I was wondering if there was any problem with the keyboards?

    Jin

    Perhaps, there is a defect in material of the keyboard. Are you running Os with the factory settings? Otherwise, contact the after-sales service. they will fix for free.

  • HP Laser Jet MFP M177fw Pro: problem with scanner HP LJ M177fw put in place

    I did something that caused my printer to stop scanning and sending on my photo gallery with windows 7.

    I am not computer smart.

    I used printing HP & doctor Scan... I get the notice with 2 yellow triangles. .. They say... ∆ WINDOWS (WIA) SCAN

    The second with the yellow triangle said... ∆ HP SCANNER TWAIN

    This means that I did something that changed the impression of being able to scan and send to my PHOTO GALLERY on Windows 7... Can someone give me it please advice that a simple old man can understand to correct his mistake... thanks to who ever

    Hi @PaPa5girls,

    I see you found a WIA and Twain error, when you ran the Print and Scan doctor. I will definitely do my best to help you.

    The WIA drivers are part of the Windows operating system.

    Run this made it Microsoft tool to see if it will solve this problem.

    Diagnose and automatically repair Windows files and records issues.

    I submitted this document to check the services of Windows Image Acquisition (WIA).

    Windows: Digitization of HP Software Does not open or Scan to a printer using a USB connection.

    Do not take into account the title. Proceed to Solution 3: check the Windows Image Acquisition (WIA) services.

    Temporarily, run Antivirus software and try to scan the image.

    If the problem persists, download and try to repair the WIA drivers. If you don't feel able to do these steps, you can contact the computer manufacturer or Microsoft to solve the error WIA.

    Back up the registry first.

    How to back up and restore the registry in Windows.

    Restore default startup for Windows Image Acquisition (WIA) Type.

    If you're still having problems, I would say to uninstall and reinstall the printer software.

    Single function and multifunction printers HP - uninstalling the printer software.

    HP Color LaserJet Pro M177 MFP series full software and drivers.

    If you appreciate my efforts, please click on the button below the thumbs up.

    If there is anything else I can help you, let me know. Thank you.

  • Problems with listbox - double click

    Hello community,

    I'm doing a program in which I'm building a dialog box by using the tab control and the user can double-click on one of the folders/files and this file must be read in the program and graphics need to be plotted.

    To do this, I use a Boolean control, if I activate it, I call a tab control with a ListBox in which I use the function of list folder to view all the files/folders in the directory I put. I was able to get the double click event to work and give me the correct path to play the file using the function "read from the spreadsheet. The part of the plot is now over, but I have problems when I try to run the program.

    The program was supposed to read the name of the cell that the user double click and only after that he reads the name I have change for a path access and then read. Which under its weight reads the file ListBox begins selected, as if I run the program once and double click on any file in the next run it will show the last selected file. The problem is that I am creating a node to invoke to reset the list box, but when I do this the program opens a dialog box to select the file to read.

    So what I need is to figure out how to do the program only runs after the user to double-click a cell, should not read the file already selected in previous executions. But I don't know what to do. Can you help me please?

    Thank you for your attention

    Lucas

    Faquim wrote:

    Well, I'm pretty new to Labview, barely a month to use it. As English is not my first language, so I do not understand some of the terms you used, like "cut upwards" or "conditions of competition" or how to clear indicators in the beginning of the program?

    ...

    The stacked sequence is to make actions happen in that order, that's how I learned. Local variables are also here because I don't know how to use the same variable twice or several times during a VI. Well, I'm still young enough for that.

    Well, you break the data flow by copying in indicators invisible only to re-read a nanosecond later. Indicators are for the user, not to store data. If you eliminate the structure of the sequence, you can wire things together directly. Data flow automatically determines the exact execution order. No required sequence.

    Faquim wrote:

    The stacked sequence is to make actions happen in that order, that's how I learned. Local variables are also here because I don't know how to use the same variable twice or several times during a VI. Well, I'm still young enough for that.

    indicators and variable local are NOT the 'variables', they are user interface elements.

    Joined a quick attempt at a code cleanup.

    All your operations of chain cable paths are still quite fragile. You should really exploited to the way datatypes. There are probably a few broken things because I can't test. However, it should give you some ideas.

  • U2413 problem of calibration double monitor and a Question

    Hello

    Yesterday, I received my new 2 U2413 monitors.  I finally understood how to calibrate them by installing the appropriate software: Dell UltraSharp adjustment of the calibration Solution 1.5.3.

    Now my problem is that I don't get the same options of calibration for each monitor.

    #1 monitor, the Dell UltraSharp calibration Solution called "DELL U2413 (2) KTXXK418AEFL", after clicking on "View profile" from the home screen offers me options White Point like CIE Illuminant D65 (ranging from D50 to D75), then native, temperature of daylight, xy... and measure.

    #2 monitor, the Dell UltraSharp calibration Solution called "DELL U2413 (2) KTXXK418AEVL", after clicking on 'View of profiling' in the home screen offers me options that I expected from the user guide: AdobeRGB, sRGB, Rec. 601, Rec. 709, SMPTE-C xy, native and Custom...

    Why are they different?  I used natively to calibrate the monitor #2 and it automatically set.  I used to calibrate the monitor #1 CIE Illuminant D65 and it does everything automatically except luminance, that I had to do it manually via the controls of the monitor.

    Monitor #1 seems to be the solution to hot.  It is almost blinding, and the colors still seem a bit saturated.  It seems that the calibration of Monitor #2 was much more thorough (it took a lot more time and seems to do everything for me).

    Why I don't get the same options for each?

    And finally, I think that I read that if I let the i1Display Pro plugged and by the monitors, it can adjust the brightness during the day based on the light in the room.  Is this true?  If so, what should I do to activate this for two screens?

    Sorry this post is so long and thanks in advance for any help.

    Sincerely,

    Gary

    http://en.community.Dell.com/support-forums/peripherals/f/3529/t/19566605.aspx

    Chris said that an update (when?) will correct this problem. Until then plug a monitor when using a DA, after calibration to connect the two and configure your installation of double screen.

    When two of the same model monitors are connected, the selection options becomes different. X - rite will release a new software version to fix this bug. In the meantime, connect to only one monitor at a time for calibration.

    DELL-Chris M

    Update - my apologies for you mislead. X - rite has confirmed that this is not a bug fix. DUCCS (Dell UltraSharp color calibration Solution) software works as expected. In a double or more monitor configuration, you must have only a monitor connected to the computer at the same time during calibration. Calibrate this monitor. Then disconnect it and connect the second monitor. Calibrate.
    DELL-Chris M

  • DeskJet 3520 problem PDF print double sided

    have a brand new HP Pavilion with deskjet 3520 computer.  and windows 8.

    duplex printing on the deskjet printer test, found stall to halfway through printing.  support got me to download the new firmware for the printer, and then it works better. \

    multi-page prints word documents double-sided without problem. but the PDF documents will not print entirely double-sided.

    Gets to halfway through and hold; research in the print spooler, shows ' printing... error.

    tried foxit and adobe, same result.  both printing single-sided without problem.

    someone at - it any help?

    Thank you

    Vern

    I solved the problem myself by plugging the USB directly to the computer rather than an extension. \

    Thanks for your interest,

    Vern

  • I had a problem with my double (multiple) of the mouse clicking when I didn't, now pressing on enter a window like this will close the active window and open one of my sites of taboo, and the keys do not work.

    This happens in any text entry window, but there is no problem with Wordpad or Word, or other apps, just in Firefox. It's as if the keyboard mapping got fouled in Firefox, but I can't find where I could check what is happening.

    You may have to Navigation switched to the keyboard IT. Press on F7 (on Mac: fn + F7) to alternate power of Caret navigation

    • Click on the Firefox button, then click on Options -> advanced-> general-> remove

    Check always use the keys cursor to navigate pages

    Check and tell if its working.

  • Problem with Scanner

    After working for several years, scanned by my EPSON CX3600 printer documents suddenly appeared with a large opaque vertical bar in the middle of the page.  Can someone suggest a remedy?

    Hello

    ·         What operating system do you use?

    ·         Were there recent changes made on the computer or the scanner before the show?

    In this regard, I suggest you to contact the Epson support site to improve assistance:

    http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-CX3600/drivers-support;JSESSIONID=B6DCA1E5904ED45A9C03D341259CE37C. ACC3-New

  • problems with scanner ION 35 mm slide - not compatible with XP or windows7?

    I bought a scanner for 35 mm slides (slides2PC) by Ion.  I installed it on the desktop running XP.  He has worked only one day.  Resettlement, stop and restart, Plug and unplug - nothing helped.  Then I tried to install on my laptop that is running Windows 7.  I tried everything, but the Device Manager does not recognize, even after running diagnostics and reinstall the drivers.

    Does anyone have a solution?

    Hello

    · You receive an error message or error code when you connect the device to the computer?

    According to the Web of ION site, the device is compatible with Windows XP and windows Vista.

    Download the drivers for the device from the link below and install it the same and see if it helps: http://www.ionaudio.com/support/downloads/slides-2-pc

    You can also communicate with ION, link: http://www.ionaudio.com/support

  • Problems when scanning double-sided printer Officejet 8600 Pro Plus

    Hello everyone

    I recently bought a printer HP Officejet 8600 Pro Plus (CM750A n911g)

    I am facing difficulties when more than one original double face scanning by ADF.

    A single page works fine, but with several pages it works in about 10% of cases.

    This is what is happening.

    In normal situations, side of first page the page is parsed, page is hit, second side is scanned, new page flips and ejects the page.

    But there are times that when the first side is scanned the first page is fed into the ADF, the second page we begin to slide into the ADF, because the upper feed Dungeon rollers turning at this time here in time.

    For the moment that first page trying to flip the machine 'sees' the second page and decided to eject the first page without analyzing the second side. It begins directly to scan the first side of the second page. (image is reversed 180% because the machine "thinks" it is the second part of the first page)

    This is happening (not always, sometimes some pages are treated as it should be) up to the last page.

    Last page is always correct, since there is no next page more to disrupt the process.

    Anyone know what to do to avoid this behavior? The paper used is normal paper 80g.

    I installed the latest version of the firmware in this machine (CLP1CN1304AR)

    I'm starting to think that this could be a bug software and superior power rollers run too long.

    I've tried different settings and this happens when starting a scan of the computer, but also when starting a scan of the screen touchscreen printer.

    Thanks for any answers

    Kind regards

    Ronny

    This one is over.

    For those who might be interested, he has focused on the machine.

    Machine update itself to works and always the latest version of the firmware very well

    Good bye

  • Problem reading disc double layer, DVD player

    Windows DVD Maker burned fine on my drive of Verbatim DVD + R double layer.  But he won't play in any dvd player, we have.  Also tried to play in our portable dvd player and the PS3 with no luck.  What Miss me?  The 4.7 GB DVD works fine at our DVD players.  Thank you

    Thanks for your reply KSib.  I had the dvd recorded in the standard wmv file that windows saves in, which is very good.  But if you try to go to where you saved it on your computer and try to write on a double layer dvd, it is write it, but don't allow you to watch on your computer or another computer... not on a dvd player.  The only way to be able to play the DVD double layer on a dvd using Windows player is to burn the Windows DVD authoring application DVD (not the location to save to your hard drive).  It takes forever to burn, of course... but so well worth it in the end when he actually plays.

    Yay for me!

  • problem install scanner hp5200

    New computer... tried to install hp5200c... scan get message "not useful with windows 7" all solutions?

    New computer... tried to install hp5200c... scan get message "not useful with windows 7" all solutions?

    Contact HP to obtain compatible drivers, you can install or get a new scanner.
    (Looks like they have stopped supporting that scan on "Windows XP").
     
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/HP-ScanJet-5200C-unable-to-install-in-Windows-7/9064d75f-0c0d-4DEE-9f25-b54562abe422

  • Problems of scanner and camera

    I use Windows 7 and have a HP Officejet 4500 G510n - z in a printer for which I installed and uninstalled, troubleshooted and more troubleshooting, performing all diagnostics etc.  He pretends to yet there is no completed same driver apply a solution for the problem of pilot and completing the installation of a driver for this device.

    It indicates also there is a problem detected with the device PnP (what is?) and the printer - for the two Windows (or HP?) said it is working on it.  Any suggestions?  I'm sick of installing and uninstalling it - the printer works on wireless and works to scan when initiated from the computer, but then only in JPEG.  When you try to scan from the all-in-one unit, which is supposed to make PDF (and did sporadically when 1st bought in September), he claims, there is no device.

    How did you install the printer? from the HP cd, * before * the printer connection, and if you had problems from the start, why did you not communicate with HP support?

  • Problem adding a double set of columns to my homepage

    I have some difficulty with the addition of a double set of columns at my homepage at http://victorylcms.org/. I would just like to add two more of the same columns under the two existing columns (headers: our Mission & Sunday). I tried to copy the code that has the div class, but my attempts have failed. I got the columns in there, but then the bottom navigation is not sitting correctly. Any help where to add the code and div markers would be excellent.

    I know that I have to add this, probably around line 150 or more, but I'm getting hung up as to where add DIV tags and how they relate to the navigation at the bottom.

    < div class = "line-hor" > < / div >

    < div class = "divisor of wrapper" >

    < div class = "col-1" >

    < div class = "col-2" style = "width: 280px" >

    If I can give you any Info for troubleshooting, or the code I tried, let me know. Thank you!

    LuisRM wrote:

    I have some difficulty with the addition of a double set of columns at my homepage at http://victorylcms.org/. I would just like to add two more of the same columns under the two existing columns (headers: our Mission & Sunday). I tried to copy the code that has the div class, but my attempts have failed. I got the columns in there, but then the bottom navigation is not sitting correctly. Any help where to add the code and div markers would be excellent.

    I know that I have to add this, probably around line 150 or more, but I'm getting hung up as to where add DIV tags and how they relate to the navigation at the bottom.

    If I can give you any Info for troubleshooting, or the code I tried, let me know. Thank you!

    In Dreamweaver design view insert your cursor to the right of the letter "n" in the word "Mission". Look along the bottom of the design view window, and then click the tag . Who will choose the code, you need to duplicate.

    Now switch code view and you will see all the code, you must copy highlighted, so go ahead and copy it. Then scroll to the end of the highlighted code until you get to the opening tag of your col-2

    If you see this:

    Place your cursor directly before the

    tag and paste in code duplication that you copied previously. You now have your code duplicate in place.

    Add now clear: both; to the css #footer (as shown below)

    #footer {}

    height: 100px;

    background: URL(images/footer-tail.png) of horizontal upper;

    Clear: both;

    }

    Job done!

Maybe you are looking for