Z5 wifi is disabled but still takes energy

Hi, Z5 has wifi but still takes energy. He is seen in detail the history of the battery. Advice how to disable wifi. BTW using wifi although it is turning for better localalization I also disable.

Thank you

I know it's a BUG of Lollipop. If you use data LTE / 3G / 2G and you have closed wifi.

It replicates using wifi, but u use DATA

Could someone post something more developed to explain this bad situation?

Tags: Sony Phones

Similar Questions

  • Cannot remove photos that do not appear in the finder, but still take place

    I had too many photos on the Ap Photos for my MaCBook Air to face. I thought I had deleted all the pictures, then the Photos App. They are however still take at least half of my memory and now I don't see them on Finder at all. How can I get rid of the undesirable pictures?

    never use the finder in photos in the photo library

    Do you still have the iPhoto library that you migrated? Therefore archive and then delete it - hard links keep the target file as long as any hard link to it exists

    Have you enptied the Photos recently deleted from albms?

    LN

  • LaserJet Pro M251nw color 200: Wifi turned off but still broadcasting

    Hello

    First, forgive my English.

    I have a HP LaserJet Pro 200 M251nw color, it has a capacity of wifi. Because the printer is connected with a cable ethernet to my router, I don't think that he had to use the wifi built into the printer.

    Thing is, when if I disable the wifi of the printer, and even if I disable "wifi direct to print", I can still see the SSID of the printer on my devices House (200 HP-Print-a6-LaserJet color).

    I looked on the forum and I tried the 'factory reset' turn, unplug the printer and taken, wait 15 seconds... etc. It did not work. I also installed the latest firmware.

    Any help would be greatly appreciated! :-)

    Hello revlib,

    Welcome to the Forums of HP Support!

    Turn off the wireless directly on Color LaserJet Pro 200 M251nw should have disabled the SSID broadcast. Since the display before disabling has not resolved, try the built-in webserver (EWS).

    To access the built-in Web server, you will need to enter the IP address for the M251nw in the address bar of your web browser. The IP address may be collected by touching the Setup program () > reports > Network Summary.

    Once in the SAP, click on network > wireless direct configuration > select and apply.

    Let me know if this has help

  • Blocker popup disabled but still get a message saying windows blocked popup

    Original title: popups blocker

    I disabled my popup blocker, but I always get a message saying blocked popup window. I've added the address of the page to the list of allowed sites, but same result

    Hi philpalm,

    1. This only happens with a specific site?

    Since you are facing problems even after turning off the popup blocker, you can try the following steps and check if it helps:

    Step 1:

    You can try to reset the security to the default level for Internet explore and check to see if that solves the problem. To do this, follow the steps below:
    a. open Internet Explorer.
    b. click on tools and then click Internet Options.
    c. click on the Security tab, then click on "reset all zones to default level'. '"
    d. on the Privacy tab , check if activate the pop-up blocker checkbox is enabled, if it is checked, uncheck it.
    e. you can also add your favorite and trusted sites by clicking on ""sites "under the protection of the information Personal tab." type the name of the web site and then click on allow.

    Step 2:

    If the steps above do not work, you may need to reset Internet explorer, to do this the ot test Fixit follow the steps mentioned in the article:
    How to optimize Internet Explorer
    http://support.Microsoft.com/kb/936213

    Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • PK disabled but still does not allow registrations double

    Hello
    I am using TOAD.
    There is a table with PKconstraint. I disabled it and tries to insert a duplicate record.
    Its Unique key (name of the PK) violated error.

    I think that would not be appropriate to come once you have your off your constraint. Fix?

    Another possibility might be that you have created a unique indexes first and then the primary key. Check this

    create table t(no integer)
    /
    create unique index t_idx on t(no)
    /
    alter table t add constraint t_pk primary key(no)
    /
    select * from user_indexes where table_name = 'T'
    /
    select constraint_name, index_name from user_constraints where table_name = 'T'
    /
    alter table t drop constraint t_pk
    /
    select * from user_indexes where table_name = 'T'
    /
    select constraint_name, index_name from user_constraints where table_name = 'T'
    /
    

    If you run, you can see even after that you drop the primary key Unique index still exists.

  • All plugins and addons disabled but still a problem of Flash?

    What can I do next?
    I have Windows 7 64-bit, FireFox 13.0.1 all Plugins and Addons are deactivated. I downloaded the latest Flash which States it installed correctly, but it did not show the Adobe box at the beginning of the spinning, and no Flash pages don't work. Everything is ok in Solution Explorer.

    The Flash plugin is visible on the topic: plugins page?

    See also:

  • my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    Step 1

    VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

    Step 2

    When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

    /Library/LaunchDaemons

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

    Step 3

    In the LaunchDaemons folder, there may be one or more files with the name of this form:

    com Apple.something.plist

    When something is a random string, without the letters, different in each case.

    Note that the name consists of four words separated by dots. Typical examples are:

    com Apple.builins.plist

    com Apple.cereng.plist

    com Apple.nysgar.plist

    There may be one or more items with a name of the form:

    com.something.plist

    Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

    These names consist of three words separated by dots. Typical examples are:

    com.semifasciaUpd.plist

    com.ubuiling.plist

    Sometimes there are items (usually not more than one) with the name of this form:

    com.something .net - preferences.plist

    This name consists of four words (the third hyphen) separated by periods. Typical example:

    com.jangly .net - preferences.plist

    Drag all items in the basket. You may be prompted for administrator login password.

    Restart the computer and empty the trash.

    Examples of legitimate files located in the same folder:

    com.apple.FinalCutServer.fcsvr_ldsd.plist

    com Apple.Installer.osmessagetracing.plist

    com Apple.Qmaster.qmasterd.plist

    com Apple.aelwriter.plist

    com Apple.SERVERD.plist

    com Tether.plist

    The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

    Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

    If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

    If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

    Step 4

    Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

    If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

    The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

    Step 5

    The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

    Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

    Step 6

    This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

  • 31.0a2 (2014-05-06), since this version cannot close tabs, when the tab is closed, it became inactive, but still visible, I had disabled tab mix addon but nada

    When closing the tab, it became inactive but still visible, I had turned off the mix tab add on but Nada, same problem. What should I do my Aurora lots of tabs, that I don't have.
    Restart Aurora did not help eider.
    Please fix it, thank you

    Hello again,
    OK, that's the Tab Mix Plus that disrupt the system, had a drink in 31.0a2 (2014-05-07), I would try to install their last WORM DEV as they suggest, but no change, then I would disable it for now to know their answer on.
    one thing: it is impossible to disable or enable the Adds in safemode, but no problem to start, restart aurora whenever he asked the condition.
    Thank you

  • The WiFi signal strength is good, but still not able to navigate

    Hi experts,

    IAM facing a problem when connecting via WiFi, we use a router in our hostel

    In all my colleagues navigation lapys is fine, but in my PC torrents are going on well, but the navigation is not possible (tried 3 browsers)

    Can you please help me in this issue

    Here is my PC details:

    My PC is around the age of 2 months

    WINDOWS 7 ultimate

    Manufacturer TOSHIBA

    I installed all the drivers recommended by myself from my pc, currently I have ATHEROS FAST ETHERNET CONTROLLER, ATHEROS WIRELESS NW ADAPTER in the NETWORK ADAPTER (Device Manager)

    And the WiFi light is also very good, with 4 license on 5 points, but still can not able to navigate

    Thanks in advance,

    Mr. the President thank you for your answer

    I don't have McAfee installed, now I got the problem.

    I kept some proxy settings in my browser, so the problem was, now its working well

    Sorry for the inconvience, thank you

  • When I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not work.

    Separated from this thread.

    I ve acer aspire e1 - 531, now I am having problem about the internet, when I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not" can u tell me how to fix it... Please stp by step... Thank you

    Hello

    Thanks for posting your request.

    I would ask you to follow the steps below and check.

    While you are on the start screen, type cmd. Right click on cmd.exe returned and select 'run as administrator'.

    Once the command prompt window opens, type the following commands and press ENTER after each:

    net localgroup administrators / add networkservice

    net localgroup administrators / add localservice

    Type exit to close the command prompt window, or simply X starting at the top right.

    Restart computer and check if you still receive the message.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • I canceled my plan creative cloud, but still make me take days of billing, but do not have access to my creative cloud products.

    I canceled my plan creative cloud, but still make me take days of billing, but do not have access to my creative cloud products.

    I can't find any subscription/order on the adobe ID associated with this profile. Could you please provide the email address in a personal message.

    Kind regards

    Hervé Khare

  • WiFi connection works, but cable has limited access.

    Hi I had a problem with my internet connection under windows 8. I got 2 networks, public and private, and I can't delete one of them. I tried turning power on/off (network location) sharing, to update/reinstall all drivers and windows updates. If I unplug the cable, connection Wi - Fi works very well. But when the cable is connected, wifi says connected, but does job and cable has limited access. If I turn off wifi, cable always says no internet access. Internet works fine on my other laptop with win7. I am connected to a mobile internet with modem usb Axesteel by WL500gp (oleg firmware). Here is a picture of my problem:

    + ipconfig/all with my cable disconnected, otherwise I couldn't post.

    Windows IP configuration

    Name of the host...: Ducktide-PC
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.

    Local Area Connection wireless LAN adapter * 22:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Hosted network virtual card
    Physical address.... : 52-08-CA-83-59-A4
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Local Area Connection wireless LAN adapter * 11:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Wi - Fi Direct virtual card
    Physical address.... : 12-08-CA-83-59-A4
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Ethernet Ethernet adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    Description...: Realtek PCIe GBE Family Controller
    Physical address.... : C8-60-00-11-AE-9E
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Wi - Fi wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: No wireless Qualcomm Atheros AR9002WB-1NG
    network adapter
    Physical address.... : 00-08-CA-83-59-A4
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::7cb8:2081:678d:d3d6% 12 (Preferred)
    IPv4 address...: 192.168.1.134 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Monday, December 23, 2013 16:33:57
    End of the lease...: Tuesday, December 24, 2013 16:42:51
    ... Default gateway. : 192.168.1.1.
    DHCP server...: 192.168.1.1.
    DHCPv6 IOOKING...: 251660490
    DHCPv6 DUID customer...: 00-01-00-01-18-17-B5-8C-00-08-CA-83-59-A4

    DNS servers...: 160.218.167.5.
    192.168.1.1
    NetBIOS over TCP/IP...: enabled

    Card tunnel Teredo Tunneling Pseudo-Interface:

    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address: 2001:0:5ef5:79fb:340 b: 3b1b:3f57:fe79 (Pref
    made a mistake)
    Address IPv6 local link...: fe80::340b:3b1b:3f57:fe79% 16 (Preferred)
    ... Default gateway. : ::
    NetBIOS over TCP/IP...: disabled

    Card adapt 6TO4 tunnel:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {4EE390FE-FA6B-4548-825E-E5A2F3A33080}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #9
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {2206F404-0D8D-4EE5-B28E-898469440B68}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #10
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Hi Jerry,

    Please, try the following steps:

    Method 1:

    You can click on diagnose to see if it shows the error message at the time of diagnosis.

    The diagnostic button is the screenshot you sent for the status of the Ethernet.

    Method 2:

    Reset the TCP/IP stack.

    One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

    TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility.

    The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:

    a. open an command prompt, press the Windows key + X select prompt as an administrator.

    b. When the user account control box pops up, click on Yes.
    c. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:

    netsh int ip reset c:\resetlog.txt


    d. Note: If you do not specify a path of the directory for the log file, use the following command:

    netsh int ip reset resetlog.txt

    c. restart the computer.

    d. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as the removal and the reinstallation of the Protocol. The reset command rewrites the following two registry keys:

    SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
    SYSTEM\CurrentControlSet\Services\DHCP\Parameters
    .

    e. to run the manual command, you must specify a file name for the log, in which the action takes netsh is recorded. When you run the manual command, TCP/IP is reset and the actions that have been taken are recorded in the log file, called resetlog.txt

    Method 3:

    Uninstall and reinstall the device adapter NIC from Device Manager can help.

    How can I troubleshoot network card?

    In addition, the driver version 7,077 for the Ethernet tΘlΘcharger the link given below.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    Please post with the State of the question.

  • automatic backup via timecapsule eventhough WiFi is disabled?

    How this work? I have the timecapsule connected via cable and wireless. I have most of the time the wireless not enabled. But still, the time machine related backups successfully. Not timecapsule active wireless connection automatically?

    Thank you

    René

    Time Capsule cannot control the wifi on your Mac.

    For clarity, you have your desktop Mac Pro, right?

    I ask because many users mistakenly post in this forum (Mac Pro desktop computer) when they really have a MacBook Pro.  With laptops Mac, the Mac will still make hourly backups not connected to the TM volume and when it is then connected to the volume TM backups will be written on this volume and deleted the Mac.

    On the time Machine local snapshots - Apple Support

  • My Firefox tabs does not close. They become disabled, but the tab is visible.

    I am running Firefox 6.0.2 with several groups and active tabs (45 tabs into 7 groups). Made by research life a lot easier. In the last two days, when I close a tab (whether using the 'x' or by right-pick menu), the tab is disabled, but not disappear. I have to close FF (recording tab), reopen and formerly closed tabs reappears as active. Usually, I can close them and that they disappear. New tab created and closed during the new session to repeat the same problem.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

    It is possible that there is a problem with the sessionstore.js and sessionstore.bak files in the Firefox profile folder.

    Delete the sessionstore.js file [2] and sessionstore.bak in the Firefox profile folder.

    If you see files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js then delete those as well.

    Delete sessionstore.js will cause App Tabs and tab groups and opened and closed the tabs (back) to get lost, so you will need to create them again (take note or bookmarks).

    See also:

  • The hit counter on my site no longer works on Firefox, but still works in me. How should I do?

    I have a free (by easycounter.com) visitor on my site meter. It worked fine in Firefox (3.6.16) and MS Internet Explorer.
    Yesterday, I noticed that he is no longer with Firefox but still works fine with MS IE.
    Earlier in the week, I have download some add-ons recommended by Firefox.
    Can someone tell what could be the problem and how to fix it? The code for the counter is still intact on my page at www.qsl.net/ve3bdb.
    Thanks in advance.
    Furthermore, the page now takes forever to load when you use MS IE, but I don't know if that is related.

    You are welcome

Maybe you are looking for

  • IM stock in the lock to activate icloud. Help me to solve this...

    Im having trouble with my other iphone. I wasn't always able to use it since im stock in the lock to activate icloud. The owner forgot details about his appleid that was used in the iphone. I need help.

  • NB550D - what is SDHC slot?

    I wanted to add a SDHC card, but did not know how fast the slot is in this book. Could he take full advantage a card 60 MB/s or the player will be the bottleneck?

  • NEITHER 9485 Circuit question

    I have a problem with a NEITHER-9485.  I'm telling us to turn on a relay high voltage AC.  I have the + 24V need to run the HV to CH0a relay.  CH0b is connected to the positive of the HV relay coil.  The negative of the HV relay's coil is connected t

  • Windows is not start/no can not log

    Hello Today, when I played a video game from my computer froze. I couldn't do the ctrl alt del so I restarted the pc. After this restart, everything was normal, as the computer began. But as windows began = the screen with the loading bar was a littl

  • Hi, I need to know I must the WinRAR archiver on my computer, too?

    You have more questions to make sure that I should delete the Scott WinRAR.  How I can say that I have my Window Vista on my Dell Studio 540.  Hope, he did! Technology Dell once said that I should have the problem after I download the Windows 7 to pu