Z585 Ideapad - display turns off after 1 Minute

Similar Questions

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Y450 screen turns off after 5 minutes, set to never power settings

  The display on my Y450 turns off after 5 minutes if it is connected or not. I changed the power settings on all levels of the power to never turn off the display, but he keeps doing. I thought that maybe it had something to do with windows is not fully updated so I did it earlier today, but it has not changed. It doesn't matter whether the system is energy saving, balanced or a custom.

  I don't know what to do to stop it, but it's annoying when I play videos and turn the screen on every 5 minutes. Is there another program I'm missing that somehow overrides the power settings?

  You may also need to change the power settings for the windows power management and lenovo power management.

  We also know, that the problem persists only watch movies?

• When listening to the music of Grooveshark, the sound turns off after a minute.

  When listening to the music of Grooveshark, the sound turns off after a minute.  Must press the key or the mouse to re-activate.  I turned off the screen saver.  Cut off.  Grooveshark said that they have no control over that, but the operating system.  Can someone help me with this?

  Hello

  Try the following steps.

  Method 1:

  Sometimes a Web site you visit doesn't look like you expect it. Images may not appear, menus may be out of place, and text boxes may be blurred together. This can be caused by a compatibility problem between Internet Explorer and the site that you are. When a site is not compatible with Internet Explorer, you'll see the compatibility view button in the address bar. You can activate only display Internet Explorer compatibility for the office.

  Use compatibility mode in Internet Explorer:

  http://Windows.Microsoft.com/en-in/Internet-Explorer/use-compatibility-view#IE=IE-10

  Method 2:

  I would say to change the mode of Internet Explorer 9 browser.

  Steps to follow:

  a. open Internet Explorer, press the F12 function key.

  (b) in the part of developers, click browser mode and click on Internet Explorer 9.

  If the Web site uses flash player, try to uninstall and reinstall and check if it helps.

  It will be useful.

• Equiium series A - maintains turns off after 20 minutes

  My laptop turns off after about 20 minutes of use. I checked for dust and clean battery etc. Any other suggestions? It has been suggested that I have to find and fix bugs in C drive but I don't know how - as any help much appreciated.

  Is what model laptop?

  Dust in the heat sink is often the cause.
  It can also be caused by a dry heat pipe (liquid escaped), or dried up CPU thermal grease or a failed fan.

  Or its possible that the power adapter is faulty, or she cannot provide enough amps, or a power adapter non - Toshiba is used.

• Windows XP - monitor not turns off, power turns off after 5 minutes options the Auto value not

  sys is xp

  * original title - I can't disable the monitor in auto. power options are set to turn off monitor after 5 min, but it never turs of when I stop using the unit *.

  Hi jerryabts,
   
  -Which is the unit that you are talking about?
   
   
  Try to download the patch from the link below and install it to resolve this problem:
   
  The monitor may not turn off on a Windows XP-based computer even if you set the monitor to turn off after a period of inactivity

• The display turns off after a few minutes and shows 'No Signal'

  Hey guys, I was faced with a weird problem recently. My desktop monitor turns off by itself after a few minutes, but the works of CPU, I can hear the fan running and see the lights blink. One thing I noticed, is that when the screen turns off, the light Orange on the processor rest on which flashes normally just. My PC works normally on the mode without failure, but worse, safe mode, but I can't work on my software CorelDRAW. This may be the problem of SMPS? because recently, my entries of mouse and keyboard did not work due to which I got a USB keyboard and a mouse. I recently installed Windows 7 64 bit, but I think that shouldn't cause the problem since I have worked with Windows 64-bit before on the same machine.

  PC configuration-

  Intel Core 2 Duo 4500 @ 2.20 Ghz processor
  ASUS P5QPL-AM motherboard
  3 GB RAM
  No (not sure, maybe integrated) graphics card
  1 TB harddrive

  PS - I couldn't find an exact category for my problem.

  Hey Archer
  Currently, I formatted my Windows 7 and installed Windows 8 and am these problems persist. I have not upgraded but formatted my C drive and installed a fresh new copy of windows 8... so I thnk it may be a problem of the SMP. Can he?

  Hi sunny

  It can or mentioned being SMPS... the reason is... you have already said that the computer or the monitor works fine in safe mode! But since his past even when you install Windows 8,
  To make troubleshooting a
  1. go to the Bios and reset all default by selecting the optimum setting in the bios... Given that your motherboard has got characteristic overclocking and selection of the IGD... let him get by default...  Start the computer and check if the monitor turns off always.
  2. If step 1 does not solve your problem... then go to the power option in the control panel and select your power setting of the high-performance system where you can set your monitor to never go to sleep.  See what's happening... If the monitor still going to sleep even after this setting... then you have a problem with drivers or the motherboard... try updating the drivers and see if that helps.
  3. If the update of drivers did not help... so the next option is to review your material... try to get a replacement screen and see if this could solve this problem... A things you can deduct that if this also fails, then the obvious reason is that your monitor is ok... and problem must be the motherboard.
  4. Firstly check the display port... does it feel loose?
  a. do you have this port pins come out?
  b. your motherboard has two power connections (EATXPWR 24-pin and a 4-pin ATX 12V... are both connected?
  c. your SMP should be at least 400W according to recommendations from the manufacturer to you. Check this box...
  d. then ofcourcse obviously... Reinstall the Rams and other external devices.
  Follow these steps and let me know your comments for each

• Monitor turns off after 5 minutes & password protect when he wakes up. View properties - > screen saver "Wait: __minutes" and "on RESUME, Password Protect" checkboxes are grayed out.

  Help, please!

  I'm on a processor to work, so I've limited the administrative rights on the computer. My work function requires that I propose on the desktop to help others with professional assignments.

  THE PROBLEM: After 5 minutes of inactivity mouse/keyboard of the monitor off on the processor to work, she does not even go to a screensaver first, the screen turns off just in standby mode. When the mouse is moved or a key is struck, the screen lights up with a name/password user. I am developing carpal tunnel / repetitive stress syndrome having to retype my username and password so darn times per day, at the expense of some administrative setting of BOGUS Microsoft Windows... SHEESH!

  When I click on Start-> settings-> Control Panel-> display-> Display Properties-> screen saver , the "Wait: __minutes" and "On resume, password protect" checkboxes are GRISEES OUT [you can't edit these settings] . In addition, the default screen saver is set to void and no matter how many times I change it to something else and click 'Apply' return empty by default.

  TWO SERIOUS CONCERNS:

  Un When I'm away from my desk for more than 5 minutes, if someone arrives at my office, looking for me, it seems that my machine is completely off, so that co-workers can get the impression that I am out of the office when I could very well be just down the Hall.

  Two The Office I'm implemented in a motion sensor energy saving lights in the office, if the lighting turns off automatically too, so if I'm missing in the server room or help someone at their work station for an extended period of time, if someone comes to my office, looking for me, my machine seems to be completely off AND turned off the lights in my room , so it's as if I has not yet come to the office that day there! GRR...

  MICROSOFT, HELP US TO FIND a WORKAROUND: Help us make our work computers appear as they are wake / turned on while we are working work - especially when we ARE at work, just not physically sit behind our office temporarily work! GOOD GRIEF...

  Help us not to disturb our admins with specialized personal requests like these, they already have enough on their plate, ensuring that the network is in place and functioning.

  -JUDGES on Temp. Job Day @ assignment
  (Chained to a machine working at the expense of some fake Microsoft Windows administrator rights)

  PS. I have a screenshot of my locked dialog box display-> screen saver properties if you need more information. I wish I could download it right on this post to make things clear.

  PPS. Isn't it above described situation in the heart of the reason why employers more these days this demand we have iPhones, BlackBerry and SmartPhones? Because doctors and human beings humans with a bit of common sense finally realized that we must be sure that we move around during the day, at least several times per day, not only the stationary to our office location - watch a screen - ensuring that move us the mouse every five minutes so that our machine is not hibernate and look like it is not to do anything?

  PPP. If Microsoft can not help me with a work around for this issue because this issue is, 'something that I take with my 'network administrator',' kiss my _______! Everyone must be wrong because of the stupid administrative _ like this and if yes - I NEED TO KNOW - maybe I was just not cut for a job on time full computer.

  PEACE

  Hello JDG_SF, welcome.

  These options are very likely controlled by your GP (Group Policy) settings on your domain. Due to the nature of the work of rights how administrative, there is no way to work around this problem, unless you have access to change group policy settings that affect all the machines on your network.

  You would need to access or to change the settings of GP or find someone who already has access.

  For more information or get in-depth help, I would recommend pass this question to TechNet:
  http://social.technet.Microsoft.com/forums/en/categories/

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra A7 turns off after 15 minutes of use

  Hello

  I have a Tecra A7 who have a problem it swich off when he uses during15 minutes, I tried with recovery of OS, drivers and update the BIOS, playing with the performace of resources I can use along 30 minutes, but even after a while turns off.
  I am convinced that it is in temperature but aparently fans work properly.

  Thank you

  To me, it looks too much to an overheating problem.
  The best solution is to clean the laptop. The ASP in your country can do this very easily.
  Of course, a use of the compressed air spray might help too

  Good luck

• Belkin F6D4050 v2 USB Wireless Adapter turns off after 5 minutes using Windows 7 Home Premium 64 bit

  I recently bought a wireless adapter Belkin for use in my Media Center PC in the living room. The router I use is also a Belkin N + Router. The wireless adapter will connect to my WPA encrypted network, but it will stop working after about 5 minutes or more. The State of the connection is going to say "No network detected." The icon shows a strong signal with a yellow bang next to it. It takes a hard reboot to get it working again. Take out the USB port and put again does nothing. The icon remains the same, but he won't let me not make a right-click or left-click on the icon. When you try to stop, the computer turns off completely; It gets stuck on the "Shutting Down" screen.

  I disabled the option in the settings to get to power adapter down to save power. I thought that this would fix it, but still the adapter is not connected.  My Dell laptop gets a signal stronger than this card, and there is also no problem to stay connected to the router.

  Any help would be appreciated on figure out how to get the card working properly.

  Hi brutus09,

  Welcome to the Microsoft Answers site!

  That the connection is lost intermittently, the issue seems to be with the drivers.

  As for now I suggest to uninstall the drivers for the wireless adapter and download the updated drivers from the manufacturers website and see if it can solve your problem.

  Access the link below to download the driver for the Belkin Wireless card.

  http://en-us-support.Belkin.com/

  1. go to the control panel and, under "Programs", select "uninstall a program".

  2. Select, then uninstall "Belkin Wireless card driver" from the list.

  3. disconnect the adapter.

  4. using another PC or via an temporary Ethernet, download the latest driver from the link above.

  5. run the executable downloaded on the computer, connect the adapter when prompted target.

  6. connect to your wireless as usual. If you have an encryption key, you will need to enter again by reinstalling the driver should solve the problem

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Let us know if it works very well, or for any further assistance.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• My screen saver turns off and the screen turns off after 2 minutes or more. How to set time, the screen saver comes on?

  ? is explicit

  Maybe in the standby power options, after a period of inactivity. (Windows) Start > settings > Control Panel > power, the "Turn Off monitor" value Options a certain amount of time or 'never '.

  Other issues requiring your attention

  The information provided with your question indicates you have outdated plugins with known security and stability issues that need to be updated. To see the plugins submitted with your question, click on "+ system details...". "to the right of your original message of the question.

  • Adobe PDF plugin for Firefox and Netscape
    • New Adobe Reader X (version 10) with protected Mode just came out 2010-11-19
    • See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
  • Shockwave Flash 10.1 r53
  • Next-generation Java plug-in 1.6.0_17 for Mozilla browsers
  1. Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
  • Open the Adobe Reader program in your list of programs
  • Click Help > check for updates
  • Follow the instructions to update
  • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
• Download the full installer (If you have NOT installed Adobe Reader):
  • "Use the links below in order to avoid the painful' getplus" Adobe Download Manager and other 'extras' you do not want
  • Use Firefox to download and SAVE the installer to your hard drive for the appropriate link below
  • Click "save to file"; Save to your desktop (so you can find it)
  • Once the download is complete, close Firefox
  • Click on the installation program, you just downloaded and allow installation to continue
    • Note: Vista and Win7 users need to right click on the installer and choose "Run as Administrator"
  • Download link: ftp://ftp.adobe.com/pub/adobe/reader/
    • Choose your operating system
    • Choose the latest version of # .x (example 9.x for version 9)
    • Choose the version the most recent number
      • NOTE: 10.x is the new Adobe Reader X (Windows and Mac only from this announcement)
    • Choose your language
    • Download the file
    • Windows: click on the .exe file. Mac: click on the .dmg file
• Using one of the links below will force you to install the "getPlus" Adobe Download Manager
. Also don't forget to uncheck the McAfee scanner if you do not want the link force installed on your desktop computer
• See also the download link': http://get.adobe.com/reader/otherversions/
• See also: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for download, you can get the painful 'getplus' Manager to download from Adobe (Adobe DLM) and other "extras")
• After installation, launch Firefox and recheck your version.
• Update the Flash plugin to the latest version.
  • Download and SAVE to your desktop, so you can find the Setup program later
  • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
  • Once the download is complete, exit Firefox
  • Click on the installer, you just download and install
    • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
  • Launch Firefox and recheck your version or up to the download link below to test the installation
  • Download and information: http://www.adobe.com/software/flash/about/
    • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
    • Use IE to go to the site above to update the ActiveX to IE
  • Download manual installers. Note the separate links for:
    • Plugin for Firefox and most other browsers
    • ActiveX for IE
• Update the Java plugin to the latest version.
  • Download site: http://java.sun.com/javase/downloads/index.jsp (Java platform: download JRE)
  • See also "manual update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
  • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
  • Remove several extensions of Console Java (if required): http://kb.mozillazine.org
  • Java test: http://www.java.com/en/download/help/testvm.xml

• any online game played and the computer turns off after 3 minutes

  It's killin me. I tried several other games online. Download everything fine and I can access the game without problems. Having been in the game for about 3 minutes, the whole computer just turns off.

  Hey Noel2112,

  Welcome to the Microsoft Answers Forum!

  We would like to get a better understanding of this issue so that we can better help you.

  ·         What version of the operating system you are using (Windows Vista or XP)?

  ·         Since when are you facing this problem?

  ·         Has nothing changed on your system just before that this problem has occurred - all new hardware devices installed?  New software or updates installed?

  ·         What browser do you use?

  ·          You get an error message until the computer shuts down?

  
  Step 1:

  a. uninstall if a third party Flash Player installed.

  b. Uninstall and reinstall the Flash Player.

  If you are using Internet Explorer, follow the steps below:

  Step 2:

  1 optimize Internet Explorer.

  2 see article below, which speaks of the optimization of Internet Explorer:

  http://support.Microsoft.com/kb/936213

  You can try the Fix tool mentioned in the article to automatically perform the steps for optimization of Internet Explorer.

  Step 3:

  1 reset the settings of Internet explorer if you still have the problem.

  2 here is a link to reset the Internet Explorer settings:

  http://support.Microsoft.com/kb/923737

  Try the tool mentioned in the KB article fix to automatically reset the Internet Explorer settings.

  I hope that the information above helps you.

  Kind regards

  Manasa P-Microsoft Support.

• Screen turns off after 1 minute

  I'm at the end of my rope here. I searched every value that I can find in the Panel control (under the display and Power Mgmt), but regardless of these settings, the screen goes black after 1 minute. If I press a key or mouse pad, it appears immediately.

  Mobile computer ASUS UX50V - Core 2 Solo double - 1.4 Ghz - 4 GB RAM - 500HDD - 15.6 "backlit keyboard
  Video Graphics & memory: NVIDIAr GeForcer G 105 M with 512 MB of VRAM
  Windows 7 Home Premium

  TIA to anyone who can tell me where this stupid setting is hidden!

  My friend, this is a community for users ACER and Asus not.

  I don't know if you Google Asus supports, you will find the answer you're looking for. Or you could buy a nice new Acer...!

• Computer turns off after a minute or two

  Original title: MY COMPUTER has a MIND OF his OWN

  Hello

  My computer turns off if I leave for a minute or two.
  Anyone know how to launch the screen saver and leave my computer on until I stopped it?
  Thank you
  Andrea
  window 7

  Check the energy saving options

• Equium A300D - 16 c - turns off after 5 minutes

  Turns off my laptop itself.

  I've noticed lately that overheats faster than usual. When I use it I have to pile on the pounds, but make sure that the left side of the laptop is pushed sideways so that the book is not located underneath.

  I tried the following:
  Taking the battery off and waited.
  Waited for the lap top cool.
  Use the power cord and remove the battery.

  For now, I changed the power settings and it has not extinguished yet, but is there something more I need to do?

  Also I was wondering how to remove dust that may be trapped inside, as well as to try to understand the problem of heating, I can never have the left side of the base covered even if its on a table such that it will turn off.

  Help is very appreciated.

  Hey,.

  > but y at - it something more I need to do?
  Yes, you should clean your laptop and remove the dust to avoid overheating and stabilize your laptop.
  Here's a good article how to proceed:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  For example I clean my cell phone every 3 months because I use it every day and the jet of compressed air is really good option for this. You n t need a lot of time and it s pretty cheap. ;)