Z5C model unlock Non-responsive screen

Similar Questions

• Outlook for non-responsive Mac

  Hello

  I had terrible problems of late with Microsoft Outlook for Mac. I have a subscription to Office 365 and uses 15.23 Version of Outlook. I have a MacBook (early 2015) running OS X El Capitan (10.11.5) issues I have experienced...

  1. for the past few weeks, the program has become very non-responsive, type a simple email of 2 lines freezes every 3 or 4 words and then catches up after 40 seconds of multicolor spinning - typing what I have so far (since "Hi there") would have taken less than 10 minutes...

  2. Since the end of last week when I try to reply or forward an email, the application crashes all together and I have to force quit - as a result, I got to meet a lot of my phone, but a lot of suspense when I need to attach documents or transmit on attachments...

  I tried these and MS forums for someone who has had the same problems, but can not find someone who knows the same symptoms.

  Am I the only one?

  Hi aidenfromoxford,

  Thank you for using communities of Apple Support.

  I see that you have a problem with Microsoft Outlook for Mac app becomes insensitive, and sometimes you have to force quit the application. I appreciate that you are taking time out of your day to contact us for assistance. I have the image you are probably ready to get this solved voicemail number.

  Since Microsoft is the creator of this app; I advise to use the help of Outlook and contact Microsoft directly on this issue. Once on this page, you will see a "Contact us" section at the bottom.

  Best regards.

• Model is SVF15215SNB Touch screen does not work - no. Pen or touch input is available

  My computer model is SVF15215SNB Touch screen does not work and it says no. Pen or touch input is available for this view kindly let me know the solution to address the issue

  Hello!

  It seems that the model number you provided is not a model for us.

  This Forum is for help and support for the products of Sony us.

  For assistance, please contact Sony support team in your area for the best support!

  Thank you!

  Sorry for the inconvenience!

  http://www.Sony-Asia.com/countryselector.html?HPID=countryselector:AsiaPacific

• A project which supports the devices to screen both touch and non touch screen.

  Our team works at the request of BB, which is oriented to a wide range of supported devices. It should support devices with OS version 4.2 - 5.0. We decided to use the v4.2 OS APIs. Then our application would be supported by all devices. It was a successful until recent times. Problems arose when we started to use navigationMovement() function to handle events of movement. This function works very well on devices with a trackball and it does not work on touch screens. On touchscreens, we should replace touchEvent() function.

  When we added touchEvent function to our project, then the project could not be started on devices with OS< v4.7="" (error="" starting="" application:="" class="" 'net.rim.device.api.ui.touchevent'="" not="" found).="" so="" i="" think="" we="" should="" split="" our="" project="" in="" two="" branches:="" the="" first="" will="" support ="" touch="" screens="" and="" the="" second="" one="" will="" not.="" there="" will="" be="" two="" shortcomings="" in="" this="">

  1. we must ensure on corrections in the two projects. It can happen that one branch has been updated and the other is not observed (has been forgotten for example).

  2 instead of this a binary, we will have two binary. But it is easier to have a binary that works on all desired platforms.

  So please give me an advice how should we update our project to make it work on touch and non-touch screen devices.

  Software development we use: JDE 4.2 and 4.7 JDE.

  you could build a library for the base classes 4.7 project and use the dynamicy for them class (class.forname) loading. or use the preprocessor, but then you would still have 2 versions

• 3D model of the green screen

  Hi some of you know youtybe channel called "Digital Corridor" they make great short films. I saw one behind behind the scenes of one of the videos out there, called shadow one of Mordor. You can watch it in the link if you want to. I want to know what they were doing at 14:07 minute of the video. They recorded a sword which took place and rotate in front of a green screen. It was recorded at a 120 frames per second. I'm fair to assume that they have used these images to do, sort of a 3D model of the sword that allows to follow the handle of the sword in the hands of actors to make the cool effects of stabing...? If so, how to make a 3D model using the green screen sequence? And if it's not the case why they recorded the sword like that...? THX in advance

  You make the 3D model of the actual prop sword by measuring and creating the model. Images of reference was for color grading and texturing the 3D sword to match lighting and reflections about the location. There are literally hundreds of ways to generate maps of texture to a 3D model. It is only an option. Many were probably used. Have you noticed that right after the explanation of what they were doing, the guy said "Thanks for reminding me" and pulled out her phone to take photos more? This is the technique I'd used to get a reflection of cards. I probably would have pulled something different to shoot lighting model. Look for a light sensor for 3D. The technique is not a tutorial, it's a semester in film school. I would go on the forums of APA 3D what ever you use or what you click Start blender.org digging around.

• Black screen (non-responsive) AT100 after 2 days while on the current

  I love this small unit, but the last 3 months I have experienced a total blocking if I leave the unit from the mains and let it go to sleep. After a few days I can not wake him up. Power light flashes, battery light comes on and the wireless light is orange. To return to the life that I have to crack the case and remove the battery. I think it's a question of OS, so I included some info below. Hoping someone can enlighten us.

  See you soon.

  Android version is 4.0.4.03.000081316

  Kernel version is 2.6.39.4 - g8e40b1f android-toshiba@tesibuiuld7 #1 SMP PREEMPT Thu Aug 13 13:13:14 IST 2012

  Don t think its problem of system.
  In which case it would be a system problem, reset the device should help repair.

  You will need to reset the device, press and hold the power button / Stop button volume up.
  Then you should get a menu offering options including resetting the system.
  Choose this option to reset the unit.

  Good luck

• Model left on my screen lock on xperia z3

  anynone knows how can I unlock my phone without using the template on my lock screen that I forgot the model.

  1. you can reset it using this method:

  https://talk.sonymobile.com/T5/FAQ/How-to-unlock-a-phone-w-o-reseting-reformating-the-phone/m-p/9272...

  2. you will need to perform a repair of software using PC Companion if first step fails.

  However, this has been asked several times, so locked thread.

• Matte, non-reflecting screen on Satellite Pro A120

  Hi, I'm about to buy
  Toshiba Satellite Pro A120 Core Duo 1.66 GHz 512MB 40GB COMBO XP
  quicklinx: 454PPN
  Manufacturer part: PSAC1E-03X00YEN

  But have a question. This laptop has display Crystal Bright/True Brite etc.?
  I prefer laptops with screens "masts", non-reflets.

  If this one has 'mirror' screen, could you tell me, who do not have?
  I am interested in laptops with Core Duo and 512 MB of RAM (propably series A or L).

  Thanks in advace...

  Chris

  Hello

  According to all specifications of this notebook doesn't TruBrite display. By the way for this laptop is "money supply". Not bad!!!

  I read somewhere that Satellite A120 has the same construction as Tecra A8 and it must have really good unit interpreted.

  In any case you can check under http://www.buytoshiba.co.uk/Toshiba_Satellite_Pro_A120_PSAC1E-03X00YEN/version.asp

  Good bye

• How to unlock 6 s screen rotation

  How to unlock the screen on 6s rotation?

  Swipe up from the bottom of the screen to bring up the control center. Then press the icon that looks like a padlock inside a circular arrow. -AJ

• Have model unlock activated, cannot reactivate by scanning

  Off city trip, I decided to spend my security settings on "swipe" to unlock, allowing a 'model' to unlock.

  Now that I'm back from my trip, I can't go back to slide to unlock. What I've done wrong?

  Try this

• Result of the "non-response" authentication

  Hi I have a simple config of the MDA

  interface FastEthernet0/4

  switchport access vlan 84

  switchport mode access

  switchport voice vlan 70

  IP access-group default_acl in

  the host-mode multi-auth authentication

  authentication order dot1x mab

  authentication priority dot1x mab

  Auto control of the port of authentication

  MAB

  dot1x EAP authenticator

  dot1x tx-timeout 3

  dot1x max-reauth-req 3

  Storm-control broadcasts 5.00

  stop storm-control action

  spanning tree portfast

  spanning tree enable bpduguard

  When I try to conect to this port - ONLY PHONE he successfully through mab Authentificates, when I try to connect PC only he authentificates successfully through dot1x, but when I try to connect to the PC via PHONE - phone authentificate successfully, but the PC - not on my server ISE log, I see only MAB trying for PC No tent dot1x.

  ARHIV-ROOM36(Config-if) #.

  29 jan 12:08:04.380: % LINK-5-CHANGED: Interface FastEthernet0/4, changed state down administratively

  29 jan 12:08:05.387: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, has changed state down

  ARHIV-ROOM36(config-if) #exi

  ARHIV-ROOM36 (config) #exi

  29 jan 12:08:06.536: % LINK-3-UPDOWN: Interface FastEthernet0/4, changed State to

  29 jan 12:08:07.543: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed State to

  ARHIV-ROOM36 (config) #exi

  ARHIV-ROOM36 #.

  29 jan 12:08:08.021: % SYS-5-CONFIG_I: configured from console to ask about vty0 (10.110.11.253)

  ARHIV-ROOM36 #.

  29 jan 12:08:09.170: % AUTHMGR-5-START: start "dot1x' for the client (0023.8b84.fa32) on the Interface Fa0/4 AuditSessionID

  0A6E0A0400000077A11BEA81

  29 jan 12:08:10.076: % AUTHMGR-5-START: start "dot1x' for the client (ccef.485c.f4b9) on the Interface Fa0/4 AuditSessionID

  0A6E0A0400000078A11BF97A

  ARHIV-ROOM36 #.

  29 jan 12:08:18.591: % DOT1X-5-FAIL: failure of authentication for the client (0023.8b84.fa32) on the Interface Fa0/4 AuditSession

  ID

  29 jan 12:08:18.591: % AUTHMGR-7-RESULT: authentication result in 'no response' of 'dot1x' for the client (0023.8b84.fa32)

  on the Interface Fa0/4 AuditSessionID 0A6E0A0400000077A11BEA81

  29 jan 12:08:18.591: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client on the Interface Fa0/4 (0023.8b84.fa32) to the

  ditSessionID 0A6E0A0400000077A11BEA81

  29 jan 12:08:18.591: % AUTHMGR-5-START: start "mab" for the client (0023.8b84.fa32) on the Interface Fa0/4 AuditSessionID 0

  A6E0A0400000077A11BEA81

  29 jan 12:08:18.608: % MAB-5-FAIL: failure of authentication for the client (0023.8b84.fa32) on the Interface Fa0/4 AuditSessionID

  0A6E0A0400000077A11BEA81

  29 jan 12:08:18.608: % AUTHMGR-7-RESULT: authentication result 'no response' of 'mab' for the customer (0023.8b84.fa32) on

  Interface Fa0/4 AuditSessionID 0A6E0A0400000077A11BEA81

  29 jan 12:08:18.608: % AUTHMGR-7-FAILOVER: failover "mab" for the client (0023.8b84.fa32) on the Interface Fa0/4 Audi

  tSessionID 0A6E0A0400000077A11BEA81

  29 jan 12:08:18.608: % AUTHMGR-7-NOMOREMETHODS: exhausted all methods of authentication for the client (0023.8b84.fa32) on

  Interface Fa0/4 AuditSessionID 0A6E0A0400000077A11BEA81

  ARHIV-ROOM36 #.

  29 jan 12:08:18.608: % AUTHMGR-5-FAIL: failed authorization for customer (0023.8b84.fa32) on the Interface Fa0/4 AuditSessio

  Nest 0A6E0A0400000077A11BEA81

  ARHIV-ROOM36 #.

  29 jan 12:08:21.678: % DOT1X-5-FAIL: failure of authentication for the client (ccef.485c.f4b9) on the Interface Fa0/4 AuditSession

  ID

  29 jan 12:08:21.678: % AUTHMGR-7-RESULT: authentication result in 'no response' of 'dot1x' for the client (ccef.485c.f4b9)

  on the Interface Fa0/4 AuditSessionID 0A6E0A0400000078A11BF97A

  29 jan 12:08:21.678: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client on the Interface Fa0/4 (ccef.485c.f4b9) to the

  ditSessionID 0A6E0A0400000078A11BF97A

  29 jan 12:08:21.678: % AUTHMGR-5-START: start "mab" for the client (ccef.485c.f4b9) on the Interface Fa0/4 AuditSessionID 0

  A6E0A0400000078A11BF97A

  29 jan 12:08:21.728: % MAB-5-SUCCESS: authentication successful for the client (ccef.485c.f4b9) on the Interface Fa0/4 AuditSe

  ssionID 0A6E0A0400000078A11BF97A

  ARHIV-ROOM36 #.

  29 jan 12:08:21.728: % AUTHMGR-7-RESULT: result of the authentication 'success' of 'mab' for the client (ccef.485c.f4b9) on Int

  ERFACE Fa0/4 AuditSessionID 0A6E0A0400000078A11BF97A

  ARHIV-ROOM36 #.

  29 jan 12:08:22.718: % AUTHMGR-5-SUCCESS: authorization succeeded for client (ccef.485c.f4b9) on the Interface Fa0/4 Audit

  SessionID 0A6E0A0400000078A11BF97A

  ARHIV-ROOM36 #.

  29 jan 12:09:19.334: % AUTHMGR-5-START: start "dot1x' for the client (0023.8b84.fa32) on the Interface Fa0/4 AuditSessionID

  0A6E0A0400000077A11BEA81

  ARHIV-ROOM36 #.

  29 jan 12:09:31.850: % DOT1X-5-FAIL: failure of authentication for the client (0023.8b84.fa32) on the Interface Fa0/4 AuditSession

  ID

  29 jan 12:09:31.850: % AUTHMGR-7-RESULT: authentication result in 'no response' of 'dot1x' for the client (0023.8b84.fa32)

  on the Interface Fa0/4 AuditSessionID 0A6E0A0400000077A11BEA81

  29 jan 12:09:31.850: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client on the Interface Fa0/4 (0023.8b84.fa32) to the

  ditSessionID 0A6E0A0400000077A11BEA81

  29 jan 12:09:31.850: % AUTHMGR-5-START: start "mab" for the client (0023.8b84.fa32) on the Interface Fa0/4 AuditSessionID 0

  A6E0A0400000077A11BEA81

  29 jan 12:09:31.866: % MAB-5-FAIL: failure of authentication for the client (0023.8b84.fa32) on the Interface Fa0/4 AuditSessionID

  0A6E0A0400000077A11BEA81

  29 jan 12:09:31.866: % AUTHMGR-7-RESULT: authentication result 'no response' of 'mab' for the customer (0023.8b84.fa32) on

  Interface Fa0/4 AuditSessionID 0A6E0A0400000077A11BEA81

  29 jan 12:09:31.866: % AUTHMGR-7-FAILOVER: failover "mab" for the client (0023.8b84.fa32) on the Interface Fa0/4 Audi

  tSessionID 0A6E0A0400000077A11BEA81

  29 jan 12:09:31.866: % AUTHMGR-7-NOMOREMETHODS: exhausted all methods of authentication for the client (0023.8b84.fa32) on

  Interface Fa0/4 AuditSessionID 0A6E0A0400000077A11BEA81

  ARHIV-ROOM36 #.

  29 jan 12:09:31.866: % AUTHMGR-5-FAIL: failed authorization for customer (0023.8b84.fa32) on the Interface Fa0/4 AuditSessio

  Nest 0A6E0A0400000077A11BEA81

  ARHIV-ROOM36 # run HS | I have aaa

  AAA new-model

  AAA authentication login default local

  the AAA authentication enable default

  Group AAA dot1x default authentication RADIUS

  AAA authorization exec default local

  Group AAA authorization network default RADIUS

  start-stop radius group AAA accounting dot1x default

  AAA - the id of the joint session

  ARHIV-ROOM36 # run HS | I have RADIUS

  Group AAA dot1x default authentication RADIUS

  Group AAA authorization network default RADIUS

  start-stop radius group AAA accounting dot1x default

  RADIUS-server host 10.5.45.128 auth-port 1812 acct-port 1813 borders 7 xxxx

  RADIUS vsa server send accounting

  RADIUS vsa server send authentication

  It seems that, as the phone was not 802 traffic. 1 x as the switch was getting no response to his request. It is very interesting and good to know. Good job on finding a solution and shares the back!

  You should probably mark the thread as answered

• Why don't unlock the lock screen?

  I know this is a long post, but I would be very happy if anyone with time on their hands to read.

  My computer works well and has had no virus since I installed windows8 (a few months ago), but today, he worked, and I rebooted, then the keyboard and mouse would not unlock the screen no matter what I do! Normally, when I click or press a key, the screen will slide up and he asked me my password, but now, it won't work.

  I tried different mouse and keyboards and all confirmed working on different machines. My work of mouse and keyboard in my bios and windows 8 s shift f8 mode. I tried different ports. I tried to unplug all USB ports and then plug on the lockscreen. I managed mode shift f8 and tried several options. Safe mode produces the same result. I tried to system restore but it gives me an error report something to do with my antivirus avira. After a Google search I found avira secure systems can't do system restored until avira is uninstalled, which I just can't do it right now.

  While in the lockscreen, I have several signs that the system is not completely frozen. The changes of time. When I unplug my USB WiFi adapter, the icon changes to WiFi and it changes back when I plug it back in. Initially, my keyboard volume knob does nothing but after spamming all the buttons, turn the volume change the volume, as indicated by the meter of volume of windows 8.

  Please help, I need to use my computer! I would prefer not to have to restore it because I don't want to lose a 2 TB of HDD to a value of things. I either need to find a way to uninstall avira has no access to windows and you try and the restoration of the system, or find a solution to the question itself.

  I tried to follow an online guide on how to uninstall programs with cmd, but it failed. I typed in wmic and that the command was successful, the next step was to type in product of is name, but who gave me an error code and it said invalid class. After some research, I discovered that x 64 systems do not come with preinstalled WMI command-line, but I can't install it without access to windows.

  Data sheet:

  Windows 8 x 64 professional
  12 GB Kingston hyperx 1600 MHz ram
  Stock of amd phenom ii x 6 1050t 2.8 GHz cpu
  And gigabyte 6850 GPUs
  ASUS m4a89gtd pro/usb3
  Microsoft sidewinder keyboard
  Logitech m500 mouse
  Alfa awus036h wireless adapter

  Thanks in advance.

  Edit: PS in safe mode, the lock screen is a reason ignored. He starts the password entry screen but the mouse is nowhere to be seen and the keyboard does nothing. The thing hits line of flashes.

  I would like to do a refresh of the system but need an installation disc and I've never had a physical disk, I downloaded an upgrade for windows 7.

  If you get to the real computer login screen, then you have a different problem that speaks of cheezstik .

  For your particular case, if you can not connect, here are your options: cmdrkeene.com/reset-windows-password forgotten

  PS. the icon with the Red Cross means that you are not connected to a WiFi now.  It's nothing to worry and normal.

• I want to have my model centered on my screen, so all of my pages that I generate from it are centered.

  I want just a simple way to do this without going into the bootstrap information and etc.  Is this possible?

  My web page looks good, but it's on the left side of the screen and not centered.  All the div I want centered is centered.  I understand how to Center a div with the left and right margins set to auto.  I want to just my next page centered on the screen.  I've read several others who have asked this question, but nothing got answers.  I must be dense.  HELP PLEASE!

  Thank you.

  Don

  You don't use a Bootstrap, your layout is governed by this CSS rule:

  {.user_page_area}

  Clear: none;
  margin left: 115px;
  right margin: 100px;
  top of the margin: 25px;
  margin-bottom: 75px;
  text-align: left;
  Width: 1000px;
  float: left;
  padding-left: 0px;
  color: #171F58;
  do-size: 110%;
  }

  Change the values for margin-left and margin-right for auto, remove the left float and specify the max-width width:

  {.user_page_area}

  left margin: auto;
  margin-right: auto;
  top of the margin: 25px;
  margin-bottom: 75px;
  text-align: left;
  Max-width: 1000px;
  color: #171F58;
  do-size: 110%;
  }

  And your styles.css file is not downloaded, but it's probably not not required.

• error in "deploy the model to the LCD screens:

  When I deploy model on LCD screens, I get the error as follows:

  ERROR: The "datasource" annotation must be defined on the deployment model.

  ERROR: Unknow annotation "datasource" on the entity, "Nsrjbxx", included in the Group of annotations "DMS".

  the model is:

  " < model xmlns =" http://ns.Adobe.com/fiber/1.0 ">

  < annotation name = "ActionScriptGeneration" >

  < element name = "FullyQualifyReferences" > true < / item >

  < / annotation >

  < name of the entity = persistent "Nsrjbxx" = "true" >

  < name of annotation 'ServerProperties' = >

  < name of the element 'ServerType' = > LCDS < / item >

  < / annotation >

  < annotation name = 'DMS' >

  < = 'Table' element name > nsrjbxx < / item >

  < name of the element 'datasource' = > java: / comp/env/jdbc/wkproxy < / item >

  < / annotation >

  < annotation name = "RDS" >

  < name of the element 'introspectedColumns' = > swglm, loginid, passwd, proxybs, Id, wskpserver < / item >

  < / annotation >

  < name of annotation = "service group" >

  < name of the element 'service' = > NsrjbxxService < / item >

  < / annotation >

  < name id = "id" type = "integer" >

  < annotation name = 'DMS' >

  < name of the element "ColumnName" = > Id < / item >

  < / annotation >

  < /ID >

  < property name = "swglm" type = "string" required = "true" length = "20" >

  < annotation name = 'DMS' >

  < = "ColumnName" element name > swglm < / item >

  < / annotation >

  < / property >

  < property name = "loginid" type = "string" length = "255" >

  < annotation name = 'DMS' >

  < name of the element "ColumnName" = > loginid < / item >

  < / annotation >

  < / property >

  < property name = "passwd" type = "string" length = "20" >

  < annotation name = 'DMS' >

  < name of the item = "ColumnName" > passwd < / item >

  < / annotation >

  < / property >

  < property name = "proxybs" type = "string" length = "255" >

  < annotation name = 'DMS' >

  < = "ColumnName" element name > proxybs < / item >

  < / annotation >

  < / property >

  < property name = "wskpserver" type = "string" length = "255" >

  < annotation name = 'DMS' >

  < = "ColumnName" element name > wskpserver < / item >

  < / annotation >

  < / property >

  < / entity >

  < / template >

  Any help?

  The data source is not actually defined for the model, but for the entity. Add a DMS annotation with a data source item in the model element:

  http://ns.Adobe.com/fiber/1.0">

  true

  Java: / comp/env/jdbc/wkproxy

  .

  .

  .

  The source of data for an entity definition is OK when you override the default data source that is defined in the model.

  Hope that helps

  Scott

• HP Jet Model # BCM943142 HM: Blank Screen at startup

  I have a HP flow I bought on a back to school sale this year. This morning when I opened and turned on, I got was a blank screen. Sometimes the screen the cursor by itself and sometimes the cursor with a blue circle, but most of the time, nothing at all. I tried to turn it off and reboot several times. I tried to close and open it. I tried turning off the coast, close, open and turn it on. The same results each time, a blank screen, sometimes with the cursor and the blue circle.

  I tried the tips on this forum to do the following:

  Boot the computer normally and log.

  black screen, hold down the ctrl and alt keys and press DELETE.

  Select Task Manager.

  There are several additional steps, but the keys CTRL + ALT + DELETE does nothing. All I get is a blank screen, so there is no way I can choose the the Task Manager or anything else.

  I don't know if it's a VICTORY of 8 or-bit 65 32 bits or 8.1 but I have listed the template # if this helps.

  Hi @jdsullivan411,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post, and I understand that you have a blank screen when you started the book of water courses. I wanted to help. What is the product number? BCM943142 HM didn't find the product.

  Please try a hard reset as explained at the link below:

  Computers laptops HP - computer won't start (Windows 8)

  Let me know if it worked.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Good luck