Z640 Workstation: z640 RAID controller drivers

Similar Questions

• installation of Windows 7 does not detect drivers for 9500S 3ware RAID controller - 4LP

  I've been using 3ware 9500 s - 4lp raid controller without problem on xp64 os.

  I want to upgrade to windows 7, but after installation clean win7 does not detect my readers as unsigned drivers.

  PLEASE HELP ME!

  Please see: Windows 7 Compatibility Center

• Portege M800 - point of exclamation on SCSI RAID Controller driver

  I had installed XP on my Portege M800. And it works properly.
  One thing that bothers me is the exclamation point on the SCSI and RAID controller in the Device Manager tab.
  XP says that no drivers have been installed.

  Need help to sweep the Exclamation marks or what driver should I install?
  Thank you

  RAID SCSI on a laptop? : eek:

  Try the Intel Matrix Storage Manager for the Toshiba Site.

• Qosmio F30: Need 64-bit driver for RAID controller

  Can someone help me?
  Please, I beg you!
  I have a Qosmio F-30.
  Where can I find 64-bit raid controller driver?

  Is there somewhere?
  Please, help me!

  Unfortunately, the 64-bit XP drivers are very rare and on the Toshiba driver page, you will find everything.
  Perhaps because Toshiba is not liberating all computers laptops equipped of XP 64-bit operating system.
  See only one way to find one; Google for 64 bit driver s David and maybe you succeed

  Good luck

• ESX4i does not see the RAID controller card

  I install the ESX4 and the ESXi4. Considering that ESX sess card RAID controller, ESXi4 will not work. I was wondering if there was a solution to this?

  Memory I don't remember ESXi4 support adding additional drivers (unlike ESX4 Installer) but I was wondering if I climbed to U1 ESX4i, that would help. Or is just "not supported"?

  Concerning

  Mike Landry

  www.RTFM-Ed.co.uk

  My problem has been resolved by the way of the ESXi 4.0 to ESXi 4.0 Update 1... which includes a driver update...

  I managed to ESXi in order to run from a USB key on the servers, but found the previous day, and DPM mode did not work properley. While he was going to suspend the ESX box very well, the machine just and seems to lose its settings to boot PXE boot - regardless of what I did with the BIOS...

  I found ESX4i U1 to install on the physical disk is more reliable...

  Concerning

  Mike

• General on the raid controller and hardware

  Hello

  I have that the hard disk controller or controller raid (0,1,5) does not work on a computer, if I add hollow PCI slot a wil raid controller or hardware, computer, or the raid not works normally?

  Johan

  Hi Johan,.

  Thanks for posting on Microsoft Community Forums.

  Ideally it is dependent on the PCI slot you use, if the PCI slot supports the hard disk controllers and RAID controllers so it will work with the computer. Almost all modern PCI slots supports the hard disk controllers and RAID controllers.

  For more information on the operation of the devices and drivers on Windows 7, click on the link below.

  Windows 7: manage devices and drivers

  Feel free to write us if you have questions/queries when you work with Windows.

• It is possible to examine the status of heath on my RAID controller?

  I have now installed ESXi with a new hardware raid controller and its working perfect, so now I think how I can watch on my diske is OK or fail?

  Can I someway check my status of heath on my controller raid and eg. get a mail if somtings are wrong?

  My raid controller is LSI MegaRAID SAS 9271-8i - 128xHDD

  Thanks for your time.

  You must install the CIM providers for controller LSI/MegaRAID on the ESXi. But it seems that they are not yet available for VMWare 6.0, if you try the 5.5.

  Check 'Software downloads'-> 'Management software and tools' article on above page LSI.

  Thereafter, you need a workstation on the same subnet and you can install MegaRAID Storage Manager (MSM) and connect to the CIM provider.

  Here's a KB on LSI for VMWare 5.0 for example tools, but you might find more / more detailed by Googling a bit descriptions: VMware KB: ESXi 5.0 Server Management Tool media LSI

• Install the raid controller during the installation of ESXi5

  Hello

  Today, we plan to install ESXi5 on our server.

  We had no problems during the installation of ESX4.1 as he ask custom drivers when it starts.

  But ESXi5.0.0 does not ask for the installation of the custom driver and we cannot install raid controller driver!

  I do not know how to resolve this so I wanted to know is possible to install the raid controller?

  Thanks in advance.

  I know I ask too many questions, but I know a little bit about it.

  No problem, that's what the forum is done

  Now should after you download the Image how I use it?

  Burn the image to a CD and run the installation from the bootable CD. Remember, though, that the image is usable only for new installations, not for upgrades (see release notes).

  André

• E200I RAID controller

  Hi all!

  I installed ESX 3.5

  on a HP Proliant 350 G5 and my RAID controller is e200i. I made 2 of my 72GO

  Hard drives on a RAID 1 + 0 and 4 x 1 TB RAID 5.

  Everything looked very nice, but I don't see my hard drives in RAID 5. I have

  tried to find some drivers for e200i but everywhere is written that these

  drivers are included in the installation CD. When I connect to the server by using the Client - I can see my raid controller, but can not see my additional hard drives.

  If someone has an idea what to do? (o).

  Thank you very much in advance and you will appreciate any help!

  Welcoem to the Forums - 4 x 1 TB RAID 5 means that your datastoe is 3 TB - ESX can recognize only of storage of data less then 2 TB - you will need to carve up the storage differently.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• PowerEdge R910 Raid Controller version

  Hi all

  How can I check the version of RAID controller and the Drac version of linux? I'm looking to upgrade both.

  Thank you!

  Jbonpland,

  The best way to see both devices information would be to install OpenManage Server Administrator (OMSA) on the system, if it is impossible, the only way to get information from the Drac use IPMI tool and with the Raid Controller you will need to use something like MegaCLI.

  If you prefer to use OMSA download here - http://www.dell.com/support/home/us/en/index/Drivers/DriversDetails?driverId=C8V9M&fileId=3291475553&osCode=RH60&productCode=poweredge-r910&languageCode=EN&categoryId=SM

  Let me know how it goes.

• Areca Raid Controller - ArcHTTP - does not work

  Areca Raid Controller - ArcHTTP - does not - need your help!

  I'm under Win 7pro, 64-bit, 24 MB of RAM

  Areca 1680 control Raid 3 7 TB and 1 TB Raid0. McRaid works very well.

  1 arec ArchHTTP V 1.85 is installed

  2. in the opening ArchHTTP-GUI is to show:

  a. #01 controller (PCI): Port 81 race

  b. Cfg Assistent: race Port 82

  When the application starts, 1 found contoller, throw... :81

  3. when I activate Cfg Wizard and launch the browser, opens ARCHTTP - Configurations

  4. when I turn on the #01 controller (PCI) and launch the browser, the site unsername and password opens

  5. After you have filled in the user pandpassword... nothing happens, the site doesnot open. It seems that I couldn't be found.

  Any idea, thanks for the help

  klfi

  Klaus,

  Have you tried the following: enter in your browser (IE, Firefox, or Chrome) and in the box enter the address bar:

  http://127.0.0.1:81 /.

  Which doesn't give you all the access you need? I just updated the firmware to 1.49 and installed new drivers 6.20.00.22 and it worked perfectly for me.

• Qosmio F50 series contains RAID controller?

  Hello

  I am looking for a new computer laptop Toshiba and understood on this forum that Satellite P300 series does not have a RAID controller :-(
  To make it short: did the series Qosmio F50 got a RAID Controller? Is it possible to rotate the 2 HDD in RAID 0?

  Hello

  > Qosmio F50 series you have a RAID controller?

  No, as I know the Qosmio F50 series doesn t supports the RAID controller.
  It supports a simple SATA controller but not the RAID and so you cannot use RAID-0.

  Good bye

• Cannot find controller drivers USB HP Pavillion M6-1040eo

  I had to do a clean install for reasons I will not go in and my arrogance is a judge not a necessary backup.

  After what I went through a painstaking quest to reinstall all the drivers, but I can't find the missing drivers for USB controllers. They are not found on the page of support/drivers for the product, or windows may find them.

  Call me a tree because I am confused.

  Help, please.

  PS According to the Microsoft Fix It tool, there are two USB controllers with missing drivers, I guess it is for USB 2.0 and USB 3.0 controllers.

  Thank you. But the installer doesn't seem to work properly. When it reaches the stage of the analysis, it gets stuck "counting upwards from the source for installable packages media."
  
  And it took hours to download.

  * EDIT *.

  After spending days scouering the HPs and the solutions Web site amendments and pressing my Google-Fu skills to their limit I found this by Googling "AMD usb controller drivers:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx

  Install the chipset drivers and reboot the machine sorting it right out. But I could not have found without your help, I don't think that USB controllers were by AMD on chip.

  Thanks a lot to you both for your help. (Ironically I did not have these problems of pilots with Xubunutu, curse you Linux-taking in charge of the industry standard productivity programs and AAA-gametitles!)

• Periphery controller PCI device SM bus controller drivers pleaseeeeee

  my model is g6 - 1318ev and I really need these drivers. My wifi is not working kai in Device Manager it says that I don't have the PCI device SM of periphery controller bus controller drivers following

  Yes, that's correct.

  Here is the link for the driver you need for this wireless card...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100125-1&cc=us&DLC=en&LC=en&OS=4063&product=5264531&sw_lang=

• controller drivers

  I down grade to windows 8 for win 7, that the pc is hp pavilion slim line 400-224 64 bits went on hp support but can't find usb controller drivers or the SM bus controller. I tried driver on support, but no work can some help. Thank you

  Hello:

  It seems that HP released drivers for your PC AMD Intel, which will not work.

  Download and install these drivers.

  SmBus:

  Here's what I did... I have zipped and attached below in attachments, the raw smbus controller driver files to decompress and install manually.

  Download and unzip the file.

  Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

  Graphics card: Installation and reboot:

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2064

  USB3: Download and install these two...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133028_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133037_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken