Zbook 15 G3: Problems Zbook 15 G3 WLAN/LAN

Similar Questions

• Toshiba 39L 3300 problems using external USB WLan WLM-20U2

  Hello

  Recently, I brought a 39L 3300 smart TV toshiba and got a free dongle for internet connection.

  However, I was unable to connect to internet via wifi. The dongle I got from the Bank is a Toshiba dual band wireless LAN adapter WLM-model 20U2. But it doesn't seem to work at all when connected to the USB port. I checked with the other connectors USB port to watch movies and it works well.

  The choice of type of network does not appear after the dongle is connected. Could there be a problem with this model of dongle? The user manual specifies a Toshiba dual band wireless LAN adapter WLM - 40U model. But the store gave her.

  No matter which also I have this problem, please help.

  > User manual specifies a Toshiba dual band wireless LAN adapter WLM - 40U model. But the store gave her.

  Yes, of course the problems of compatibility between the TV and the WiFi dongle could cause this problem.
  I recommend to use the recommended WLan dongle WLM - 40U for this model of TV

• Problem updating driver Atheros wlan

  im not using HP Notebook 2000 with product no E9G88UA #ABL 8-64 bit OS windows. I've updated my WLAN Driver from HP Support Assistant via Wi - fi.Before Update Software again there is no problem with my Wi - fi, more late as he does not find any networks and showing a driver problem after troubleshoot Windows. Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter is currently in my notebook.kindly help me to overcome the problem and tell me support drivers.

  Thanking you.

  Hi Sparkles1

  I solved my problem of my pc refresh.

  My pc is doing well and the resolved wifi driver problem

  Thanks for your advice.

• ZBook - how do wired LAN?

  My wife and I have new 17 s of ZBook that work very well on our wireless network. How can I force allows them to use our wired network via CAT5 cable?  There is a button that disables the wireless, but that doesn't seem to do anything except turn off the wireless.

  I tried again and this time it worked. I suspect the CAT5 cable, that I first tried was defective. I downloaded a large file over the network twice, once using wireless and once the cable network. It reported an average using 2 MB/s wireless and 16-17 MB/s using the wired network. It's what I expected, but it did not work when first tried.

  HP connection manager came when the network connection has been created, and then he went. How do my own HP connection manager?

  Thanks for having me look at that again, now to see if the other ZBook works also on the cable network...

• problem with the netsh wlan command from. Help, please

  Hello Mr. met,

  I have problem with my laptop as wfi hotspot.
  It shows an error while startin.
  the error said... "" the device or resources are not in correct state to do "
  I don't know why this error is coming.
  I am attaching the picture of the error.
  I used the command "netsh wlan start hostednetwork"...
  To start the wifi network...
  Thank you..

  Hi Eddy,.

  Sorry for the delay in response.

  You can refer to these discussions that could help you with password in mind.

  See Anshul Khanna replied on 26 May 2013 and this thread

  I hope this helps.

• Satellite U400 and WXP - No WLAN LAN not internet

  Hello everyone and thank you for reading my post.

  I just bought a new Satellite U400 - 12R PSU40E and installed quickly clean Windows XP 32-bit with SP2, the installation was flawless after changing HARD drive in compatibility mode mode. Downloaded and installed all the drivers from this site for my model which included the Realtek network drivers for the Marvel Yukon for the LAN and wireless. No yellow dot in the currency manager and the system is just perfect.

  However, for the life of me, I CAN NOT connect this bloody thing for any LAN or WLAN, the funniest is when I connect the LAN cable in my office in it, the little icon in the status bar displays connected and all of the ip addresses are correct, same COMODO starts to automatically download the updates and full updates after a while but I can't surf the internet to all.

  I even installed Firefox and chrome and with any 3 browsers I can browse the internet, even if all the anti virus, COMODO, or windows firewall all turns off.

  Please help me in anyway or advice or pointers I might have missed.

  Thanking you in advance.

  Reza.

  Thanks for the comments! :-)

  I had the same problem as you for years. I had Zone Alarm and if I close this application I do not have access to internet. Thus, the application should still work.

  However, I hope you don t also this problem.

• Problem connecting to the wireless LAN.

  My roommate and I just got wireless internet. She can connect without a problem by using his laptop, but refuses to my office. I have a B of Linksys Wireless USB adapter. Let's get our wireless network, he'll tell me that the network is out of range when I try to join. When I go to do it manually, it says "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. "I read somewhere that WEP data encryption may have to be modified in the WAP format, but this format is not an option on my computer.  It seemed that I needed to download. If it's my problem, I have another question, how do I download something from the internet when the problem is that my computer does not have the internet?

  My roommate and I just got wireless internet. She can connect without a problem by using his laptop, but refuses to my office. I have a B of Linksys Wireless USB adapter. Let's get our wireless network, he'll tell me that the network is out of range when I try to join. When I go to do it manually, it says "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. I read somewhere that WEP data encryption may need to be changed to training WAP, but this format is not an option on my computer.  It seemed that I needed to download. If it's my problem, I have another question, how do I download something from the internet when the problem is that my computer does not have the internet?

  The message about "5 or 13 ascii characters or 10 or 26 hexadecimal characters" means the WEP encryption (which is essentially no encryption as much as anyone other that the more casual intruder is concerned).  Yes, you should use WPA or WPA2 encryption, but your old wireless adapter may not support one of the people.

  You most likely problem is that the wireless router is configured to use wireless-G only.  You must be the one controlling the router enter the configuration utility and set it to allow two G and B.  If you identify the make and model of the router, I can tell you how to do it--assuming you have access to the router.

  You can consider buying a new wireless adapter.  http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=-1&isNodeId=1&Description=wireless+usb+adapter (read the comments before you select only on the price)

• With the wrt54g router wireless security - separates the WLAN LAN clients

  I have a wrt54g router and want to separate clients WLAN access to computers and servers on the local network... in other words, I want to make a 'guest' network I put the router in 'router' instead of 'bridge' mode I want just to be sure if it's the best thing I can do in terms of transforming the network wireless in an isolated.

  Check out the 3rd party firmware like dd - wrt.

• Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

  Hello

  I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
  Wireless Network Connection 4 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Double Belkin N + Wireless USB adapt
  Physical address.... : E8-5B-5B-49-DD-CD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Please help me solve the problem.

  tanks

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you some questions, in order to better understand the issue.

  1. What is the exact model of the Belkin USB adapter?

  2. What is the brand and model of your computer?

  3. When was the last time it was working fine?

  4. Remember to proceed with software or hardware changes recently?

  This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

  Method 1: Run the network troubleshooter

  I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Network Wi - Fi problems and

  Follow the Microsoft article on wireless and wired network problems. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

  Thank you

• Problems with VPN PIX 525 Lan-to-Lan Cisco 2610XM

  Hello world

  I have a VPN with PIX 525 versi problems? n 7.2 (1) and Cisco 2610XM Version 12.3 (18). When start the PIX, all tunnels works well, but 6-7 days, some of the tunnels do not work properly. Traffic passes the tunnel with some networks, but not with all networks. Sometimes the tunnel descends and it is imposible to go upward.

  Attach them files are the "debug crypto isakmp" in both devices.

  Thank you and sorry for my bad English

  If your configuration of the tunnel on router 7500 series, the tunnel interface are not supported for politicians to service in the tunnel interfaces on 7500

• Problem of satellite a50 wireless LAN

  No apparent reason my wire will disable its self. This happens every day and a re-boot will fix it.

  Hello

  It is possible that the power options are set to turn off the Wificard to the battery mode!

  Please check this box, the issue only appears in battery mode and look at the properties of your Wificard, then proceed to configure and advanced. There is a box on the power management!

  Please check this and after again!

  CAMPino Bye

• Problem to find the wireless LAN driver

  I bought the HP Pavilion Notebook 15-p007tu and there is no support of wifi deriver in hp Web site, I am so shocked

  Hello:

  Here are links to the drivers you need:

  Wireless:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.TPST=swdMain&s...

  You also need this bluetooth driver...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405371&SP...

• Pavilion 15-ac041ne: problem with the installation of Lan & Wifi driver

  Hello... I recently bought Pavilion 15-ac041ne laptop. I installed a new copy of windows 7 64 bit, but when I tried to install the lan and wifi drivers she had failed. I tried all the ad Lan drivers WiFi here given in the database. I also checked the path of device information, but was really surprised to find that the brand that has been listed in the database has been for Realtek while the "device info" showed the Broadcom brand, which did not appear in the database. My question is why this specific brand has not been there or has someone removed the lan/Wifi device pluged in the broadcom and realtek... is there a possibility... ???

  Hello

  For the full series, some have Realteak, some Broadcom. You machine also have Bluetooth combo:

  http://support.HP.com/us-en/document/c04701738

  Please install the following Broadcom wireless driver:

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72879.exe

  and Broadcom Bluetooth:

  http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71440.exe

  I do not know what database you're talking about, but all the drivers for your machine are on its home page:

  http://support.HP.com/us-en/drivers/selfservice/HP-15-notebook-PC-series/7771404/model/8429047

  Kind regards.

• WLC2106 - how bridge WLAN LAN?

  I have my WLC2106 on a network with no VLAN and no 802. 1 q.  I already have a DHCP server on the local network.

  However, it seems that I still need to configure the WLC to proxy requests DHCP wireless clients.  Is it possible for me running the WIFI network in pure bridge mode and do not have the WLC make any type of transmission by proxy DHCP for my wireless clients communicate directly with the DHCP server?

  Hello Larry,.

  If I understand correctly you want to disable the WLC DHCP proxy and the client taking IP through normal network streaming, correct?

  If yes then you can do

  config proxy disable dhpc

  Please let me know if this can help?

  Kind regards

  ========

  Talal
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• WLAN, lan, dmz on esxi with 2 network cards

  Hello

  I'm newbie esxi. What I'm trying to achieve on my esxi server is simple firewall/gw between internet (vmnic1), LAN (vmnix0) and DMZ. I have only physical 2 NICs in my server, DMZ should be "completely collapsed DMZ. I intend to have 1 web server (www, ftp) in the DMZ, 2 LAN and smoothwall acting as firewall servers.

  After reading some pdf files and some forum discussions I've come with an attached 'Networking' design.

  Could you experts please check design and advise me how secure is it and where are the potential pitfalls?

  COS you need to manage your esxi server.

  The following work of wll:

  An Esx3i server with two physical network (Teddy) interfaces

  pNic0 connected to the internet

  pNic1 connected to your local network

  3 vSwitches configured, one for each natachasery and one internal vSwitch (DMZ)

  Comments "Smoothwall" configured with 3 network cards, one for Internet, a local network, and a DMZ.

  Guests in the DMZ must be created with vNic on the DMZ vSwitch.

  SmoothWall manages the firewall and passes the correct port_number, etc. to the ip address in the DMZ.

  Kind regards

  Torben Jungsberg