zbook u15: fan at high speed after installed windows 10
Yesterday, I updated to windows 7 pro for windows 10 pro. I have rarely heard my fan in windows 7 and only when I was cad or had a large number of open images. With 10 windows, my fan is at high speed all the time.
Suggestions?
Ok
Found two programs running that caused the fan to high speed.
One was post 2012 31% of the processor chips
other was
AlertusDesktop or 32% of the processor.
E-mail private, removed the Alertusdesktop for now and normal operation.
Thank you!
Tags: Notebooks
Similar Questions
-
Fan at high speed after upgrade to 1.4 (7 c) 1.5 (1f)
Hello
After the 1.4 Firmware Update (7 c) 1.5 (1f) through HUU on my two C220M3 the fan speed is higher than before (8500 - 9000 RPM).
Is this normal?
the servers are very loud.
Best regards
Nico
Hello Nico,
Yes, it's normal version 1.5.1f as we have increased the speed of the FAN to work around the known issues.
http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCue68150
The next major version of the firmware will host additional logic that bring down the speed of the FAN.
HTH
Padma
-
Event ID 1 for Intel Bluetooth wireless high speed after Windows Update
After the automatic update of Windows, I received the following in the event error message where the spectator, telling me that Intel Bluetooth wireless high speed needs to be reinstalled after the upgrade.
How can I reinstall the Intel Bluetooth wireless high speed on my laptop?----------------------------------------------------
Source: ApplicationExperienceInfrastructure
«Bei der application (Intel Bluetooth wireless high speed, von supplier Intel) following problem aufgetreten sind: Um eine einwandfreie Funktion zu able, muss der nach Intel Bluetooth wireless high speed modified von Windows neu installed werden.»
+ System
-EventDataDBType 15
AppNameCount 36
AppName Intel Bluetooth wireless high speed
VendorNameCount 6
VendorName Intel
SummaryCount 149
Summary Um eine einwandfreie Funktion zu able, muss der nach Intel Bluetooth wireless high speed modified von Windows installed werden neu.
SessionID 0Hello
I put t know what cell phone or what system you are using, but I guess that the laptop uses a combo of Wlan Intel card which supports BT also.
So I think that you should simply reinstall the Intel Wlan BT driverI also found this how to from Intel:
http://www.Intel.com/support/wireless/WLAN/sb/CS-032541.htm -
SD card is not working properly after installing windows 10
I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.
Hello LorinMax,
Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!
If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:
1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.
Disk utility (El Capitan): a disc repair
2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.
Try safe mode if your Mac does not end commissioning
Graphics performance limited in recovery of OS X or in safe mode
3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.
Boot Camp Installation & Setup Guide
See you soon!
-
Satellite Pro U200 - no sound after installing Windows 7
Hello
I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.
G.Magnason
Hey Buddy,
Have you already checked the site Web of Toshiba itself?
http://EU.computers.Toshiba-Europe.comI found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)
-
HP pavilion zv5000: missing zv5000 system drivers of base after installing windows 7
After installing windows 7 displays device management point exclaimation
Hardware ID:
PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01
PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C
PCI\VEN_104C & DEV_8201 & CC_088000
PCI\VEN_104C & DEV_8201 & CC_0880Also CD-ROM/DVD-rom won't recognize my cd/DVD, but Device Manager shows the work of the unit.
Need help
Hello:
You can use the driver card reader XP support for your laptop and driver page.
There is no vista or W7 driver for this card reader.
If auto installation does not work, manually install the driver.
-
Computer OS used to start after installing windows 10
Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?
What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB. With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version. Once clicked, it will ask you if you want a DVD or USB for the iso.
Once it's done and you have the DVD or the USB version, see if you can install Windows 10. If this fails, you may need to replace the hard drive.
-
Satellite P300-1This - Microphone does not work after installing Windows 7
Hello world.
At first, I'm sorry for my bad English, so I will say in no time.
A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?
I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.
Hello
Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.
-
No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home
No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?
Thank you. This site help me solve my problem.
-
HP Officejet 7612: analysis of problems after installing Windows 10
After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.
Printing is no problem.
With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.
I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.
With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.
Same problem with "Windows Fax and scan."
Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?
Hello
Thank you for using the HP Forums.
You can download and install the software COMPLETE features of HP printing for your operating system:The following resources will help you:
HP printer install wizard for Windows
http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
Hope that helps. -
Disc Association file missing after installing windows 7 SP1,.
After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this
Restore the Type Associations by default Windows 7 file Extension:
http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.htmlChange the programs that Windows uses by default:
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-defaultNever be afraid to ask. This forum has some of the best people in the world to help.
-
My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that
I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.When all else fails RTFM:
Install the Windows updates:
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updatesUpdate your computer:
http://Windows.Microsoft.com/en-us/Windows7/updating-your-computerUnderstand the Windows automatic update:
http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updatingUpdates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questionsChange how Windows installs or notifies you of updates:
http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
0 x 80244004 error after installing Windows Update Agent 7.6.7600.256
After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?
Hello
I saw an answer posted by (DevekY) and it's here:
(Go to Advanced Setup ESET
Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
Installation scanner HTTPS-> HTTPS filtering modeSelect "do not use HTTPS protocol control")
I did this and solved my problem (have no more error 0 x 80244004)
But what do you think? My computer will not be endangered?
Thanks a lot for your time to help me.
-
Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc
My pc runs Windows XP Home Media edition. I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions." To maintain the stability of the system. Windows must restore the original versions of these files. Install your Windows XP Professional CD2. I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3. How can I stop this happening?
Hello
Step 1: I suggest you perform the SFC scan on the computer and check.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, type the following line and press ENTER:sfc/scannow
Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
After installing windows XP sp3 do not work my motherboard drivers intel
After installing windows XP sp3 my motherboard drivers intel do not work. My mother board D845 GLAD. What could be the problim?
Try reinstalling the drivers for your motherboard chipset, you can check this link to download the chipset driver:http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+845+Chipset+Family+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+D845GLAD
Also, try to download the drivers from your computer manufacturer site... Their number is 800-936-5700, and they are open Monday - Friday, 05:00-21:00 Pacific, Saturday & Sunday, 06:00 - 15:00 PST. XD
Maybe you are looking for
-
Impossible to find Siri on Preferences system on MacBook Air after update to El Capitan
I upgraded my MacBook Air to OS X El Capitan 10.11.6 but should not be allowed to Siri during Assembly and can not find the option in system preferences. Any ideas?
-
I accidentally put the date to January 1, 1970 on the iphone 6 s and is no longer stuck on the Apple boot screen, please help!
-
My sister does not want its windows 7 upgrade. Can I use it?
My sister just bought a computer acer laptop with vista home premium installed. She is expected to receive its windows 7 free update this week, but it won't install it. My question is that I have a toshiba laptop with vista home premium. Can I use it
-
I need to know how to connect to an administrator account on my Windows Vista computer.
original title: TELL me HOW 2 LOG IN AS ACCOUNT of USER ADMINISTRATOR. ? = TRY TO CHARGE 2 IE 7 AFTER GARBAGE CAN ACCIDENTALLY DELETE & DRAIN. = HOW CAN I SIGN IN AS ADMINISTRATOR WHEN = I AM UNIQUE OWNER, COMPUTER USER. ? I TYPE BIG TO BE ABLE TO RE
-
Hello. I'll buy a HARD drive of my laptop (on the inside). But I don't know if it would be good for my device. Are all the same HARD drive for all laptops or not (I guess not)? How can I determine the type of my laptop unless it would be disassambled