ZLIB to decompress archive on BB10

Similar Questions

• MRT 5.1

  The "Malicious Software Removal Tool" MRT.exe (KB890830) is updated monthly by Windows Update.   After June 2010 it could be installed manually for Windows 2000 up to version 4.20 (may 2013).  Version 5.x starting with 5.1 (June 2013) does not work for Windows 2000: it is of course possible to decompress archive with 7 - zip self-extracting or similar and included MRT.exe can be started again and replaces any version prior to % windir%\system32, but analysis is blocked at the point where it must be said that he found no malware.  Cancel dialogue cannot cancel the MRT 5.1 running under Windows 2000, the task manager can complete the process.

  The "Malicious Software Removal Tool" MRT.exe (KB890830) is updated monthly by Windows Update.   After June 2010 it could be installed manually for Windows 2000 up to version 4.20 (may 2013).  Version 5.x starting with 5.1 (June 2013) does not work for Windows 2000: it is of course possible to decompress archive with 7 - zip self-extracting or similar and included MRT.exe can be started again and replaces any version prior to % windir%\system32, but analysis is blocked at the point where it must be said that he found no malware.  Cancel dialogue cannot cancel the MRT 5.1 running under Windows 2000, the task manager can complete the process.

  Support for Windows 2000 ends on July 13, 2010.  Time to move...

  Geoff

• Pavilion a556x: HPLIP updated to 3.15.2 fails to make step.

  OS: CentOS6, no later than

  Not my first rodeo with hplip.

  Properly installed source and used

  hplip - 3.13.10
  hplip - 3.13.11
  hplip - 3.14.10
  hplip - 3.14.4

  I always follow the directions for Centos6, 32 bit, on this page:

  http://hplipopensource.com/hplip-Web/install/manual/distros/CentOS.html

  Now seeks to update for hplip - 3.15.2, as requested.

  Here is the transcript of failure 'make' step, conducted as a user:

  [Michael@HP1 hplip - 3.15.2] $ make
  / bin/sh. / libtool - tag = CC - mode = compile gcc-DPACKAGE_NAME =------'HP\ Linux\ Imaging\ and\ Impression\' - DPACKAGE_TARNAME =------'hplip\»-DPACKAGE_VERSION=\"3.15.2\' - DPACKAGE_STRING =------"HP\ Linux\ Imaging\ Impression\ 3.15.2\»-DPACKAGE_BUGREPORT=\"3.15.2\ and\" - DPACKAGE_URL =------"------" DPACKAGE-=------"hplip\»-DVERSION=\"3.15.2\"- DSTDC_HEADERS = 1 - DHAVE_SYS_TYPES_H = 1 - DHAVE_SYS_STAT_H = 1 - DHAVE_STDLIB_H = 1 - DHAVE_STRING_H = 1 - DHAVE_MEMORY_H = 1 - DHAVE_STRINGS_H = 1 - DHAVE_INTTYPES_H = 1 - DHAVE_STDINT_H = 1 - DHAVE_UNISTD_H = 1 - DHAVE_ = 1 DLFCN_H- DLT_OBJDIR=\".libs/\' - DHAVE_LIBDL = 1 - DHAVE_PTHREAD_H = 1 - DHAVE_JPEGLIB_H = 1-DHAVE_UINT32_T = 1 - DHAVE_LIBHPIP = 1 - DHAVE_LIBHPIP = 1 - DHAVE_LIBCRYPTO = 1 - DHAVE_LIBNETSNMP = 1 - DHAVE_NET_SNMP_NET_SNMP_CONFIG_H = 1 - DHAVE_CUPS_CUPS_H = 1-DHAVE_LIBUSB_1_0_LIBUSB_H = 1-DHAVE_PYTHON2_6_PYTHON_H = 1 - DHAVE_DBUS = 1 - i. - PII - Iio/hpmud-Iscan/sane-Iprnt/hpijs - /-I/usr/include/python2.6 - g - O2 - DCONFDIR = Icommon-' / etc/hp\"-cupsext_la - cupsext.lo - MD-MT MP - MF .deps/cupsext_la-cupsext. TPO - c o cupsext_la - cupsext.lo ' test-f 'prnt/cupsext/cupsext.c ' | echo '. / "prnt/cupsext/cupsext.c
  libtool: compile: failed to create the ".libs".
  make: * [cupsext_la - cupsext.lo] error 1
  [Michael@HP1 hplip - 3.15.2] $

  What has gone wrong?

  Thank you

  Oops, my bad.

  Decompressed archive as root, not the user, so file hplip - 3.15.2 due incorrect permissions.

  That fixed, and now I see the usual blizzard of nonsense is going to do.

  See a different blizzard of nonsense to make install as root.

  Didn't see a statement of success for either, but I don't remember if it of normal or not.

  Hplip updates are frequent enough to be slightly annoying,

  but not so common that I remember they looked like the last time.

  Maybe just a tick more information on the instructions page.

  as "is that the last few lines of a good performance" of every aspect of the stage as,

  It would be nice.  OTOH, the page of instructions is already intimidating and includes more than one page.

• Not taken CS2 support MAC OS?

  I spent nearly a thousand dollars, or even more, on CS2 for my PC back in the day.  Added a few very expensive actions.  Now, Microsoft will not support Vista, so upgraded to a MAC and spent thousands more.  Downloaded the link from Adobe to use CS2 but new MAC is apparently too new and the OS does not support the update online.  There must be a solution where customers do not get screwed out of thousands of dollars. Help me to Adobe here!

  I sympathize with you - 'old' software is often established as being inferior, while I also agree that when the old version made just perfectly well, there is not (nor should there be) compelling to upgrade reasons.

  Another option is to use WINE on your Mac that runs Windows software directly through a layer of emulation of all kinds (well, actually, it is NOT an emulator).

  The advantage is that Photoshop CS2 will run as fast as it would on a Windows 'real' with the same characteristics as your Mac machine. And it's completely free!

  Home - PlayOnMac - use your Windows applications on Mac easily!

  WineBottler. Run Windows on a Mac programs

  This will also allow you to

  Install wine under Mac OS X

  You can also encapsulate Photoshop CS2 in a 'skin' WINE and run it directly on your Mac.

  http://wineskin.urgesoftware.com/Tiki-index.php

  Here are the steps for PlayOnMac:

  (1) download and install PlayOnMac.

  (2) you may need to install Quartz during installation. This means that you need to connect and only once before you start playonmac.

  (3) install Keka (archive) Keka - free Mac OS X file archiver

  You'll need to decompress archive Adobe Photoshop CS2 later.

  (4) download the Installer WINDOWS Photoshop CS2 here (don't forget to check the box "I agree"):

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

  To do this, you MUST be connected to your first Adobe account. Then, open this link.

  Copy the serial number (select and command + c)

  (5) use Keka to decompress the Photoshop CS2 exe file (which is actually a zipped folder) somewhere on your desktop.

  (6) beginning PlayOnMac. Click on "install a program."

  7) click on 'Install an unlisted program' in the lower left of the window playonmac.

  (8) take note of the three instructions that appear.

  -leave the unchanged default installation directory.

  -do not leave the Installer launch the application at the end of the installation

  -If asked if you want to restart Windows, you can answer Yes, but under no circumstances should you restart the host operating system yourself.

  (9) click Next a bunch of times, then select "install a program in a new virtual disk".

  (10) enter a name for your photoshop cs2. No space! For example: "photoshopCS2.

  (11) then of dialogue: keep all uncontrolled boxed and click 'next '.

  (12) after a certain time, it will ask you to select the installation file. Navigate to the unzipped Windows Photoshop CS2 installation folder and open the folder ' Adobe Photoshop (R) CS2. Then select the file "Setup.exe".

  The windows installation will now begin. When it asks for serial number, use Ctrl + C to paste it into this field. You have an official license of Photoshop CS2, and therefore, you are allowed to download this version of Photoshop. For Photoshop CS2 license servers were fired off line a couple of years, and this serial number will work for this version.

  Continue with the installation and click Next twice again. Installation will now begin. This may take a minute or two. Uncheck the "read me" and then click "Finish."

  (13) after a while, Playonmac will ask you to make a shortcut. Scroll through the list, and then select "Photoshop.exe."

  (14) in the next dialog box, name your shortcut "Photoshop CS2"

  (15) repeat these steps, if you wish, to ImageReady.exe. When done, select "I don't want to make another shortcut.

  Phew, finished! Photoshop CS2 is now listed in your PlayOnMac dialog box. Run it by selecting the icon and then clicking on "Run" in the left sidebar.

  I hope this helps. Before starting Photoshop first, make sure sign you and again (requirement of Quartz).

• How to change the application Livepkgr main.far

  Hej, we are trying to achieve mobile webstreams for our customers. So far, I realized a scenario, where my custom cam application connects to the application of livepkgr, which starts to record the stream and publish video files of HLS. What we do in our main application (flash player based), are a few billing intervals, check-ins on database and so on. So in my understanding, it is necessary to implement some of these necessary functions in the application of livepkgr as well, because the customer directly calls the url for mobile stream, without any flash. There is no communication to our custom to all application, I'm wrong? Then I ve tried to simply replace the main.far by a main.asc custom (decompressed archive before you get the original main.asc). But now, when I want to test the scenario again, the connection is rejected by the livepkgr application. He say´s the main.asc ist not signed. Is it possible to archive this? Or would it be sufficient to extend my existing application (main.asc) in the way the livepkgr Application records flows for not using two applications for office outings / mobile? Any help would be really appreciated! Thanks in advance, Patrick

  For all those who have the same problem (info: you cannot find any information on it).

  The default deployed livepkgr ist signed by Adobe. You must copy the example/livepkgr like you new application where you can change the main.asc every time.

  Adobe: Please provide some of this information in your documentation!

• Problems with GZIPInputStream. I need to decompress a byte [], but I can't.

  
  

  I suggest that adopt you a structured approach to debugging this issue and examine each of the different stages in order to know where is the problem.

  So, the first question to ask is what kind of compression has been applied to the bytes, you try to decompress?

  You seem to be uncertain and so try both ZLIB and GZIP formats file in each case are different, so ZLIB will fail unzip a GZIP and GZIP will not decompress a file ZLIB.  And as I pointed out in the other post, that I directed to you, ZIP and GZIP formats too.  GZIP will only process not a ZIP archive.

  So, what kind of compression has been used on the file that you have?

  I see that you tried to inflation, and suggests that it was, in fact, ZLIB, but I see that this class can read the beginning of the file and to determine the correct decompression method.  Can you empty the first bytes of 16 or more in the file in hexadecimal, and tell us what they are?  That could help.

  The other thing you can do is to confirm that in fact, you have provided a valid stream to this treatment.  So, instead trying to decompress the stream, how about you just read into a byte array and making of yesteryear, you can read the file.  This will help decide if the problem is in the decompression or the original entry.

  I would use IOUtilities.streamToBytes () to this

  So two things to investigate both of which will help you to solve this problem.

  About your message:

  "I do not understand why valailable () returns 0.

  I guess you mean available().  I have already explained this.  You don't understand what part of my explanation?

  ""I forgot to mention that the read() method goes to the exception.

  It would be good to know what Exception you have - you will find 'the Exception ToString () method' very useful for this.  It can even tell you what the problem is!

  "in the try / catch so I kept locked, because not to close ()." »

  It makes no sense to me.  Certainly treatment of your catches should recover from any errors (including closeing the watercourse if necessary) and let your treatment continues in some cases - even would it be fair to report an error.  I thought that was the point of try/catch?

• Massive storage of decompression problem

  I was trying to download an important file from a friend (. tar.gz), and when I went to unpack it (in the archive utility), the file is immediately explode fills almost all the entire my drive (4to). (The original file was only 2 GB)... The decompression progress were only to halfway done, when all of a sudden, the system attracted my attention on disk space is almost full. I force you quit the application, but the system still says the space is used by something upward. This file decompression failed hid? How can I recover this space without deleting I can't once I have remove the applications? Help!

  Omni DiskSweeper can show you the exact size and location of all your files. It will be the inventory of your disc from files that occupy more space. It can also give you a fairer read disk space than the Finder or storage tab of the about this Mac. If you want you can even delete files from OmniDisk Sweeper. But beware, some items may be important for your system.

  But it seems to be some kind of malware, making hitchhiking in the tar ball. For that I download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

• Satellite M70 - pilot archives on the Toshiba site to THE corrupt

  Hi all

  I do a new install of XP on a Satellite M70. This page lists all the necessary drivers:

  http://www.MyToshiba.com.au/support/notebooks/satellite/M70/psm70a-01700e/download?OS=22

  Unfortunately, each zip file I download from that link is corrupt, when I try to open them I get the following error:

  "The compressed (zipped) folder is invalid or corrupted."

  This is the case for every ZIP listed in the link above. The Intel display driver which comes as an exe file is fine.
  I tried to redownloading the file several times, the site of NZ too. I tried native XP zip, jzip, 7zip and winrar tool.
  I tried Windows XP and 7, work and home. I'm sure that there is a problem with the archive itself.

  If there is someone from Toshiba here could they please have the fixed files or provide me with links to them?

  Kind regards
  Simon

  Hello

  If advance download 2 page Australian pilot of form files to check. All right, I can unzip the archive. Try using winrar and disable the Antivirus to check if it blocks. Once, I had problem with Nod 32 antivirus, that he was blocking the files from archive to decompress

• Has Windows XP Professional it built in application to decompress?

  Has Windows XP Professional it built in application to decompress the downloaded zipped files?

  Note of the moderator; split post from another thread, edited subject

  Open Windows Explorer, click on zip archive and select "extract all...". »

• Error when extracted Win RAR archive

  Dear Experts,

  I have problem, somebody get this error when you want to extract. RAR files?
  !   C:\Documents and Settings\Touraj\Desktop\clip 1.part2.rar: CRC failed in the encrypted file (wrong password?) CD1.iso

  Password is correct, I get this error at 32% :) if anyone knows how to solve this problem, tell me

  Thank you very much

  This could be due to 2 reasons

  1 archive is corrupt... solution - download it again or try repair option in the menu. If this does not work then the only option is to use RAR Recovery Toolbox. http://www.oemailrecovery.com/rar_recovery.html

  2. password is incorrect... Extraction procedure up to a certain point before reporting an error is not an indication of correct password... I had a similar experience with winrar, where he reported the wrong password after partial decompression... get the correct password.

• Unzip archive zip with sample - installer of resources on the SD card

  Some of you might have found this:

  http://supportforums.BlackBerry.com/T5/Java-development/resource-Installer-to-SD-card-application-SA...

  In the sense that I said in one of the positions, you need to know what files are in the package, but added "see below".

  Finally, here is the "see below", which was invited by this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/searching-a-way-to-manipulate-7-zip-zip-and-...

  The attachment is a zip archive.  Please unzip and you will find a JDE project.  In this project there is a code and another one zip archive.  The code addresses of internal zip, reading of the directory archive and writes all files from archive to SD card.

  What I think is useful in itself - you could use this project, paste you own zip archive inside and you have an installer!

  And I suspect the decompression code could be useful too.  It uses the native decompression integrated for the Blackberry, is so as soon as possible.

  I actually use a zip archive as a repository for data, as well as in some applications, the archive is never actually decompressed, it is just copied to the SD card and left it as archive.

  My testing suggests that actually faster, he should leave intact zip archive and process files directly from it, rather than decompression and processing of the files on the SD card.  In my tests, it seems that there is a charge of overhead costs related to the opening (or maybe find) each file on the SD card - this is deleted using uncompress the treatment because the file to the SD card (i.e. archive) is opened only once.

  He was actually waiting for me to find an excuse to publish, I'm sorry it has taken so long.

  Also my apologies, this is a JDE project.

  This code is offered without support, you're on your own.  But I can you that there are applications on App World using this code.  And I'll try to answer the questions.

  And above all it is completely free, without any reserve.  And although there are pieces that resemble the library Java ZIP and zipme - it is because I was looking for a good architecture.  It's my own code.  So, copy and paste to your heart's content.  No need to credit me, it can be all your work if you want to!

  Take advantage of...

  Peter.

  Tried that. Did not help. Doesn't have a change on all but a few.  Clean all and package.

  It is no more a problem for me. I just took the classes I need for a background decompress and added code to transfer the zip file from a Web site to theSD card. Also created a disassembled, version of the UnzipRunnable that is not a thread, because the calling class is threaded anyway.

  Works well, thanks a lot

• Impossible to get "Hello World" AIR app to work in 3 SDK BB10

  I followed the instructions here:

  https://developer.BlackBerry.com/air/documentation/BB10/create_your_first_application_cmd_ms_2010847...

  and here:

  https://developer.BlackBerry.com/air/documentation/BB10/testing_your_application_cmd_ms_2010851_11.h...

  Lhen I compile and run the application using:

  amxmlc Example.as

  BlackBerry-airpackager-package Example.bar - installApp - launchApp example - app.xml Example.swf bar - descriptor.xml QNXSkins.ane QNXDevice.ane QNXNetwork.ane QNXSensors.ane blackberry-tablets - icon.png - device 192.168.64.131 - password playbook

  ... I get a white screen with no text on this subject.

  If I follow the instructions "To debug your application using the command line" on the next page, then I get:

  E:\Users\Daniel\Dropbox\Apps\BB10Example2>fdb
  Fdb Adobe (Flash Player Debugger) [build 23201]
  Copyright (c) 2004-2007 Adobe, Inc. All rights reserved.
  (fdb) run
  Waiting for player to connect
  Drive connected; session starts.
  Set breakpoints and then type "continue" to resume the session.
  [SWF] qnx.fuse.ui.skins.QNXSkins - 603 349 bytes after decompression
  [SWF] Example.swf - 458 642 bytes after decompression
  c (fdb)
  Exception [fault], information = TypeError: Error #1007: instantiation attempted on a non-constructeur.
  Fault, createCSS() to ThemeWhite.as:25
  25 / / code goes here
  (fdb)

  Finally found the problem. You were very much on the right track:

  I must have installed the SDK before, because there is a directory ' blackberry-tablets-sdk - 3.0.0 "here:

  E:\Program Research In Motion\blackberry-tablet-sdk-3.0.0

  When I installed the most recent SDK, a few nights ago, I noticed that the name of the directory was still "blackberry-tablets-sdk - 3.0.0 ', so big.

  Then bam, these problems.

  I finally discovered is that the more recent program default installation:

  Research In Motion (x86)\blackberry-tablet-sdk-3.0.0 E:\Program

  Notice something?  No more than I have, but:

  E:\Program Research In Motion\blackberry-tablet-sdk-3.0.0

  =!=

  Research In Motion (x86)\blackberry-tablet-sdk-3.0.0 E:\Program

  Why the hell would they changed the default installation directory?  What this meant was that my build scripts were still referring to the old search directory E:\Program in Motion\blackberry-tablet-sdk-3.0.0.

• Question of BB10 Dev Alpha: debugging token is invalid

  I'm trying to get a token of debugging on my dev alpha device and it just cannot work. I can create, validate, and install the token, but it generates an error: debugging token is not valid. Or not applicable for this device.

  10.0.4.197 OS version

  Build ID: 196525

  PIN: 29D939F4

  Start: 28 June 21:32:34 UTC 2012

  I use BlackBerry 10 WebWorks SDK 1.0.0.15

  I just restarted the device. It is currently 21:26 according to my computer clock and the BB10 clock is synchronized with the clock of my computer... it of doesn't look right... the listed start time is 5 minutes in the future.

  Here's what I did.

  blackberry-debugtokenrequest -storepass storepass -devicepin 29D939F4 debugtokens\BB10_Dev_Alpha_debugtoken_29D939F4.bar
  

  Info: Debug token created.

  blackberry-debugtokenrequest -verify debugtokens\BB10_Dev_Alpha_debugtoken_29D939F4.bar
  

  Issue date: 28 June 2012 02:02:59 CEST
  Expiration date: 28 July 2012 02:02:59 CEST
  Features:
  702102004

  Info: Debug checked token.

  I checked the device PIN above (702102004) is correct. This is the decimal version of my device PIN (29D939F4)

  I tore the debugging, and here's the manifest token:

  Archive-manifest-Version: 1.2
  Archive-created-by: BlackBerry BAR package v1.4

  The package author: XXXX
  Package name: debug.token
  Package version: 0.0.0.8
  Package-Type: debug-token
  Package-author-certificate-Hash: XXXX
  Package-author-Id: XXXX
  Package-Id: XXXX
  Package-Version-Id: XXXX
  Package - Issue Date: 2012-06 - 29 T 00: 02:59Z

  Debug-token-system-Actions: run, multi_window, multi_instance, run_air_native, run_native
  Debug-token-expiration Date: 2012-07 - 29 T 00: 02:59Z
  Debug-token-device-Id: 702102004

  I was thrown for a moment of the date (Date of show-package -: 2012-06 - 29 T 00: 02:59Z) until I realized it was just

  my current time converted to offset - 0. I am currently in Toronto, where it is now UTC - 4.

  blackberry-deploy -installDebugToken "C:\Program Files (x86)\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.0.15\debugtoken.bar" -device 169.254.99.117 -password password
  

  Info: Send request: install Debug Token
  News: Expired session reset
  Info: Send request: install Debug Token
  Info: Action: install Debugging token
  Info: File size: 2273
  result::success

  Yet, the device don't like this token. Here is the result.

  

  Any ideas to know what could be the problem here?

  Thank you

  Stem

  Rod,

  I had the same problem with my alpha chips and debug dev. Setting date/time is the source of the problem.

  Here is the fix:

  • The mode of development
  • Set your date/time to June or the date in the past.
  • Check your token security and debugging
  • Debugging token becomes valid

    My date is June 25

  Let me know if this solution worked for you! Worked for me.

  

• Development of a PhoneGap Plugin for BB10 (QNX)

  Hi all

  I'm playing a bit with phonegap 2.5 just to understand how it works with BB10... In addition to the basic steps, I still don't understand what I need to do in case I need to create a plugin custom..., according to the documentation, it seems that the reference language is Java, but as far as I know, the native extensions for BB10 must be developed in C++ and I strongly suspect that Java is for the old version of BB (torch etc.)

  Even if I dig into the sample project located within the archive zip Phonegap, I can't understand how extensions can be made.

  Can someone help me on this?

  Thank you very much

  -marco

  Hi Marco,.

  Yes, you are right! Once we have aligned with cordova, you will still generate native code in the same way, but we allow you to package it as a plugin of cordova rather WebWorks extension.

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!