Zoo Tycoon 2 error: Zoo Tycoon 2 could not create a graphics converter. Your provider of graphic adapter to ensure that you have the latest driver. »

I am running Zoo Tycoon 2 on Windows 8 with a Nvidia GeForce GTX645.  I installed ZT2 and get the following error when you try to play: Zoo Tycoon 2 could not create a graphics converter. Your provider of graphic adapter to ensure that you have the latest version of the driver.

I already did so that my drivers are up to date.  Any ideas?  Thank you!

Hi Luanne,

The problem is specific to a Zoo Tycoon 2?

This problem may occur if the graphics drivers are damaged. I suggest to uninstall and reinstall graphics card drivers and check if it helps.

To uninstall the device drivers, follow these steps:

a. drag the mouse down to the left and right click on the Start icon.

b. Select Device Manager.

c. right-click on the device driver, and then click Uninstall.

See the link to download the drivers:

http://www.GeForce.com/drivers

I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

Tags: Windows

Similar Questions

  • Error: "Hardware accelerator is disabled or not supported by your video make sure card driver you that you have the latest video card driver installed and the accelerator is running.

    Original title: Solitaire stop working right after the update to download

    This slowed the game.  I checked the video card is correct, and hardware accelerator says it's working properly.  This started after I downloaded two optional updates, one of them KB968930.  I uninstalled both of them and tried to restore the system with no result. the rest of the message is "Hardware accelerator is disabled rooms or not supported by your video make sure card driver that you install the latest video card driver and the accelerator is turned on."  I checked these things.

    Thanks for the help.  I had fixed to date through the tool and the info of the performance.  Find where it says new hardware installed, click on repair, I did and it worked.  I don't know what caused the problem, but my game index had fallen to 1 and came back up to 3.3.  Thanks for the help. P. W. O'Malley

  • 1721.there error is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.

    Hello!
    I tried to install a copy of Symantec Corporate Edition Antivirus software but despite several attempts the software could not be installed in Windows 7 Home Basic Edition version but get error message repeated as "error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. "
    Could someone help me out here.
    Thank you

    Hello CBhaskar,

    Thanks for posting on the Microsoft answers Forum.

    If the information of Gokul has not helped to solve your problem, then I suggest that you use the Windows Installer Cleanup tool.
    There may be a corrupt installation, you need to delete everything first.
    Click here for a link to download the utility from Microsoft.

    You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

    If please reply back and let us know if this helps solve your problem or if you still need help.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

    Design:

    2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

    2 x fresh install of the SRM VMs version 5.5

    20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

    Question:

    Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

    I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

    Errors:

    (attached file viclient-3 - 000.log)

    The request has been aborted: could not create SSL/TLS secure channel.

    (attached file viclient-3 - 000.log)

    The remote server returned an error: (503) server unavailable

    I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

    I need help to debug this further.

    Thank you

    ************

    < < Updated > >

    Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

    But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

    I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

    Maybe it's a clue to the root cause of...

    Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

    Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

    attached files

  • Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/li

    Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/lightroom/develop presets." I tried disconnecting and then signing unistalling the app and back in and resettlement. nothing seems to work. any help would be appreciated.

    Cannot create the folder means that you don't have WRITE permission for this folder. Then... change your permissions.

  • I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "E Yes

    I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "So even if Lightroom CC is installed, it will not launch.  What should I do to allow him to launch?

    I had the same problem, just bought a new Macbook Pro (June 2015) and Lightroom CC had this error as well.  Here is the dialog box that I've had with Adobe, and it cures the problem:

    Adobe: Please click on the search option in your Dock at the bottom of the screen.

    Adobe: Then click GO on the MenuBar at the top of the screen.

    Adobe:, and then click GO to folder, and then type: ~/Library/Application Support/Adobe /.

    Scott: OK, I did

    Adobe: Control-click on the folder and choose read information.

    Adobe: Expand the section sharing & permissions.

    Adobe: Click on + icon, and check if the administrator select

    Scott: OK, I chose the Admin

    Adobe: Give read and write to the Admini

    Scott: completed

    Adobe: Click the gear icon and select apply changes to included items

    Scott: OK

    Adobe: In the Finder window, click GO and select GO to folder

    Adobe: Type in
    Adobe: / Library/Application Support/Adobe
    / and press enter

    Scott: completed

    Adobe: Control-click on the folder and choose read information

    Adobe: Expand the section sharing & permissions.

    Scott: ok

    Adobe: Give read and write permissions to all users

    Adobe: Then click on the sign + and add the rest of the users from the list

    Scott: completed

    Adobe: Now, please try to use the Lightroom from your computer.

    Scott: Thank you - it works!

    Hope this helps others.

  • Error: "there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider staff or the support package' when trying to install iTunes on Windows 7

    Original title: DLL required for uninstall and install iTunes?
    I get this message: there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package.

    I can't install and uninstall iTunes no matter what I do. Help, please!

     
    Hi stjimmy9999,
     
    1. are you able to install other programs on the computer?
    2. what version of iTunes you are trying to install?
    3. have you SpyCatcher program installed on the computer?
     
    Program SpyCatcher interrupts the Windows Installer to not save the files during the installation of iTunes.
     
    Try these steps and check the result.
    Step 1: Download the latest version of iTunes
    a. visit http://www.apple.com/itunes/download/
    b. click on 'Download Now' and save the file to the desktop.
     
    Step 2: Install the program as an administrator by disabling all programs currently running on the computer, non-Microsoft
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
    c. restart the computer and right click on the Setup file of iTunes, right-click on the file and click Properties.
    d. click on the Compatibility tab and place a check on "Run this program as Administrator" under "privilege level".
    e. click ok to apply the changes.
    f. open the file and install it.
    g. Article, follow "step 7: reset the computer to start as usual.
     
    For more information on installing iTunes, see the following article: difficulties to install iTunes or QuickTime for Windows
    For further assistance with this, please ask a question about iTunes Forum

    Visit our Microsoft answers feedback Forum and let us know what you think.
  • error: could not launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

    A new installation of indesign CC 2014 - I got this error message:

    Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.


    I tried to uninstall the application and reinstall it, still get the error


    I tried to install a previous version - indesign 9; also get the error


    I tried logging out CC and return, still does not work


    I tried restart my desktop computer, still does not work.


    went to the disk utility to verify and repair permissions. repaired all of an existing, still does not work


    Apparently, a permissions problem, I don't know what to do to fix this

    See does not start under new inDesign CC | Adobe Community

  • SE error message: "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your provider staff or the support package 'after updating to iTunes

    Original title: after recent update, the installation software WONT work properly! Help!

    • I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.

      I get a message saying "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

      Anyone know what I need to do? Or how to fix it?

    Hi MxGurl,

    If this occurs after the installation of update Itunes, then go to the following link and check if it helps.

    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

    http://support.Apple.com/kb/TS1717

    If this does not help, you should contact Apple support or post in the Apple discussion forums.

    http://discussions.Apple.com/category.jspa?categoryID=149

    You can also check out the following link and try the steps by Suresh I Support Microsoft, moderator and Andre.Ziegler and check if this may help

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/11f4e2c0-0595-4c7f-8579-e52d2c4bf36c

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error: "Win32 dll' after that I installed the latest driver from nvidia.

    My specs:

    -Windows Vista Edition Home Premium 64-bit

    -4 GB of ram

    -Core 2 Duo E8400

    -Geforce 260GTX

    I installed and activated my Windows Vista with service pack 2. I downloaded and installed all the latest drivers of my motherboard website.

    Problem: I downloaded the latest driver for my graphics card nvidia and once that I reboot my windows displays the error message saying "win32 dll" does not work and my background task bar is full of this message. Also, my pc is very slow. I somehow get to "system restore point" restore back to another restore point.

    Once my pc over to restore to a different point, my pc works fine. So I installed an old version of my graphics driver and it worked fine. Restart and distillers works very well.

    Question; What is the problem with my pc? What is my graphic card, driver, something that I didn't do, and how can I solve the problem?

    Thank you for your help

    Hi tsunomi.

    Have you had a chance to do a startup repair?

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Error: there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.

    Hello

    I run windows 7 Home premium x 64 on my computer HP Pavilion dv6-6b20ee... when I try to install iTunes from Apple this error always popup and refuses to proceed with the installation... I had several times to contact Microsoft team and team of Apple to resolve the error, but no one could find a solution... what should I do? I tried all that to run the checkup Fixer SFC of Microsoft tools and still have no idea... someone please help

    Cherif Basharie

    Have you also then try install as administrator, as advised?

    If Yes and with no luck, kindly ask the Apple community.

    See you soon.

  • Error code: 0x80070005 Windows could not create an installation folder.

    Downloaded a copy of the student of digital river and installation on a mac with bootcamp.  It installed perfectly on my iMac desktop computer, but when I try to install it on my macbook pro, you're using windows vista and the upgrade, I get this error message.  Any ideas?  Thank you.

    There are a few solutions in which more people are that it works in this thread:
     
    http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ab9ad9fa-c4c2-4B3A-977d-44e62e5b00fa

    Let us know if one of them fix it.

    BillFill MSFT

  • iTunes - there is a problem with this windows package install. A program required for this install to complete could not be run. Contact your provider to support personal or package

    I'm literally desperately now to find a solution to this. I've tried EVERYTHING and still it will not be installed. QuickTime is installed, just used itunes. He comes back with this message and I am at my wits end. Ive tried the solution where you go into Control Panel, programs, and "fix" the components but it still doesn't work. I have not updated in my programs software is if it means something. I don't know what to do. someone help me please before go me crazy. Thank you

    Hello

    Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

    If you don't have anything done, see if this information helps you.

    "Not to install iTunes or QuickTime for Windows"

    http://support.Apple.com/kb/HT1926

    «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

    http://support.Apple.com/kb/HT1923

    If the advice already given does not, please contact Apple for assistance.

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    See you soon.

  • Installation of Hyper-V T420 2012: "we could not create a new partition or locate an existing one.

    Try to install Hyper-V (hypervisor bare metal, not a role) on T420 with PERC H710, receive an error message:

    "We could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

    (Don't even have the slightest idea where search "Files Setup logs" - do not think that the Setup program has a place for them to write).

    What I'm doing wrong here?

    The waiter came with a RAID1 mirror previously partitioned on H710 (the rest of the readers - still not configured); Double SD cards with the hypervisor, VMWare (to be erased or left alone).

    Thanks in advance for any ideas.

    After you disable the internal SD card slot, the installation ends without incident.

  • Error message: "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    Original title: problem with the Windows Installer Package

    I am trying to install an update for my video FlipShare program and I get the following error message "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your provider to support personal or package. Anyone has any ideas to fix this?

    Would be - what your anti-virus program blocks scripts? See:

    Error a Script required for this install to Complete could not be run when you run a Microsoft Fix it Solution! -Microsoft Fix it BLOG - Site Home - TechNet Blogs:
    http://blogs.technet.com/b/fixit4me/archive/2009/03/31/error-a-script-required-for-this-install-to-complete-could-not-be-run-when-running-a-Microsoft-fix-it-solution.aspx

    Ramesh Srinivasan . The Winhelponline Blog
    Microsoft MVP, Windows desktop experience

Maybe you are looking for

  • Satellite P100-240: is it possible to replace the graphics card

    Okay, im fairly new to laptops, I had my P100-240 for just under a year.I set up with it for long enough, its been really good to me.The problem that has really started to check me is the graphics card, Nvidia Go 7600, it slow, Nvidia do not support

  • problem installing with C4480 and Time Capsule

    I'm putting in place a new Photosmart C4480 to use with my computer laptop MacBook and my Office PowerPC G4 tower. When I connect the printer directly to the G4 using the USB cable, it works fine. But when I connect to the USB port of my time Capusul

  • How to unlock my tablet of 7 2800 HP Slate without password

    I blocked my HP slate tablet 7, I press power + volume top + home but Tablet turns off just, I tried volume as well, I can only get to power + volume up and that gets me to Android System Recovery, I don't want to lose my data, the only options I hav

  • Windows 7 (pro?) will not be connected to the non - Internet

    Summary: We do a workshop where we have set up a private network that is not connected to the Internet. We have a fleet of laptops (11 of them) that connect through an open wifi router. The router provides DHCP, and there is also a web server and dat

  • Question of BB10 Dev Alpha: debugging token is invalid

    I'm trying to get a token of debugging on my dev alpha device and it just cannot work. I can create, validate, and install the token, but it generates an error: debugging token is not valid. Or not applicable for this device. 10.0.4.197 OS version Bu