ZTE a219a does not connect crashes upward on obtaining IP address

I have a linksys router. I rebooted the router and the ZTE. I disabled my firewall. I don't know what else to try. He just hangs up on obtaining IP address...

I upgraded the version of the firmware on my linksys router and that did the trick. My router is a few years old.

Tags: Lenovo Tablets

Similar Questions

  • iPad does not connect to the server

    Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

    Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

    This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

    I was wondering what is happening and if there is an inexpensive way to get it running again?

    Sparkgapper

    p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

    If you have problems with the applications of stalling or crashing,

    double click on the "home" button

    -slide up on applications to force leave their

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    (2) three methods of restoration of your ipad.  [simple as abc]

    2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

    3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

    http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

  • Firefox will not be connected or open. Mac OS 10.6.8. I worked with many tabs open when Firefox no longer works. Now, it does not connect. I uninstalled and downloaded several times.

    I worked with many open tabs and firefox crashed. Now it does not connect to internet at all.

    Create a new profile as a test to see if your profile is the source of the problems.

    See "basic troubleshooting: a new profile:

    There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

    If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

    See:

  • Dell Dimension 4600 with pack 1 XP does not connect to the cable modem

    Hello, I have a Dell Dimension 4600 older XP. The hard drive is dead and I replaced and then reloaded pack 1 with the intention of making all the revisions on the internet. The problem is that I cannot now connect to the internet via my broadband router directly connected to the computer. It seems that the wizard to connect only wants to use the dial upward and does not connect to the router. Just recompose. It seems to ignore the connection from the router to broadband and wants to use the dial upward only.

    Go to control panel of control/Internet options/connections, then set it - never establish a connection - then click on apply.

  • My desktop under Vista Home Premium does not connect to the internet.

    I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
    Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

    Are you sure you never had a Norton trial subscription on your computer?

    Norton will do strange things.

    http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

    Try to use the Norton removal tool.

    The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

    See you soon.

    Mick Murphy - Microsoft partner

  • Sony bravia 50 kdl50r450a does not connect with WiFi

    Hello

    I have my Hitron modem in the basement and a flight upward is my new sony bravia 50 kdl50r450a. I am able to connect via WiFi with my smart phone & top of the Tower in the same room but without any problem.

    I have this TV for a month and that once I was able to connect to the net via WiFi.

    I'm on Extreme and tested my speed and got 4 bars. It recognizes my name, modem etc. but sometimes the apps not loading even on the TV. Often, the PVR box updates and transforms itself that I have to activate manually again. This usually up the wide PIN too, I can see.

    I contacted my internet provider to test the speed which seems to be very well.  I put manually the PIN via a laptop computer to make sure that the two PINS of the TV and modem are put in correspondence. I unplugged the TV for 30 seconds.  I unplugged my modem too.  I can't get the net with the exception of a spinning ball.

    I tried internet apps... Sony browser... loading the Google page, but no keyboard can't. Each app gets a spinning ball or Try Again message?

    This set also does not recognize my .jpgs and my videos on my USB it recognizes all the smart features are completely unnecessary at this stage?

    Any suggestion would be appreciated.

    Thanks in advance!

    I have Sony KDL-50R550A and I have the same thing as SonyGal. I have only had the TV for a month and I've been able to access the Internet once and it was the first day I put in place. What SonyGal said was my same experience. I even had my cable company come out today (24/09/14) and reset on the router and updated for speed. It does not recognize the WPS, the signal is very strong, but does not connect. Only says:
    Device to wireless TV: found
    Local access: failure
    Internet access: failure
    I tried everything in the troubleshooting, disconnect, reset, prayer, etc. nothing worked. Someone please help...

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

  • Messages does not connect to the Yahoo IM account?

    Messages app v9.2, currently works very well with my Google account and iMessage, also worked with my Yahoo Messenger account, but recently (today?) does not connect to it.

    I know that Yahoo has made changes to their Instant Messaging System. This change affected only Messages?

    Hello

    I can't connect either (I didn't realize that I do not use)

    However going on the Yahoo Site and change the password does nothing.

    With the help of their option 'insecure Apps' does nothing no more (there was an email saying I was using access to messaging through an unsafe application - but I have not used their messaging service for a very long time.)

    It does say read more suggests, is not Mail (after OS X 10.9 is OK)

    He does not on access to their e-mail service.

    There is no option in Messages to try to activate disable SSL you can with AIM or Jabber accounts

    I have looked in the help (a little) but still found nothing.

    20:49 Tuesday. October 4, 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

  • iPhone 5 sec Bluetooth does not connect

    My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

    I was able to pair with my ipad.

    Hello

    Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

  • Bluetooth does not connect on iOS 10 and sierra OS

    I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

    I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

    I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

    It seems that the "it just works era" is over for apple.

    If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

  • I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

    Turn off the new modem for at least 30 minutes. More is better.

    Perform a hard reset on the AirPort Extreme, then it turned off.

    Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

    After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

    Then, turn on the airport and let it run a few minutes

    Set up AirPort Extreme again

    Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

  • Thunderbird does not connect with the server

    Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

    Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

  • IMAP e-mail accounts does not connect

    Just recently my iCloud, Gmail and Outlook IMAP accounts does not connect through the app Apple Mail on my MacBook Pro running 10.11.6. I get a popup error message and exclamation points appear next to each account that States the unable to connect to the server application. IPhone & iPad with the same accounts are fine, just my Macbook Pro has this problem. Connection Internet is fine. Suggestions?

    Please read If you cannot send or receive e-mails on your Mac - Apple Support.

  • Does not connect with the e-mail server after update.

    Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

    I use Thunderbird version 38.1.0.

    Thank you.

    The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

    Until the next problem...

  • My UK 6s iPhone does not connect to the network in Germany?

    My UK 6s iPhone does not connect to the network in Germany?

    'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

Maybe you are looking for

  • iPad 'No. Service' after updating to iOS 9.3.1

    I see that some have encountered the problem of «No. Service» update to IOS 9.3.1.  My iPad has no data connection cell with 'No. Service' after the update more.   Advice or assistance?

  • Dial of concerns about Firefox v 13 + built in speed.

    I have read many credible sources that Firefox 13 or more will have its own built on speed dial just like Chrome or Opera so here are a few questions and suggestions I have.1 the integrated speed dial for Firefox have the option to select the number

  • Satellite L20 always ask me to quote windows

    Could Hi you help me. I have a Satellite L20... I don't know what is happening with my operating system. After hybernating, reboot, shut down, or even stand-by when I want to start a new section always asking me computer RESUMING Windows and press th

  • Time signature will change only a beginning of the beat

    I'm moving from 4/4 to 3/8 and I want to change will take place in 3-3-1 but logic will only make the change to 4 1 1-3 1 1.  I tried slippery and setting the editor but he always snaps back to the overall rating.  Any ideas?

  • Lenevo Z580 key lock problem

    I bought reliance Kolkata Z580 August 4. I amreally very satisfied with my purchase even after the purchase ofauthorized dealer. We've checked the machine, the best way possible anda machine at home. At home when we started typing a single key'W' is