Cisco DataCenter

Hello world I have an error in my domain UCS - M name is my VSAN is out of service. Any idea of what is the cause? Thank you

Hey everybody, I posted earlier about a matter of license I also have an expiration of key ring in my critical errors, it will affect my environment? Kind regards

Hi, Experts, My customers want to know the energy consumption and the books of the modular series and UCS blade. So I was able to find information about it with the "UCS Power Calculator" tool. But they also want to know the calorific value of the sy

I need to change the IP of our Server Central of the UCS. Help, please.

Hi Memebers I received the following error message; Thermal characteristics on frame 2. Reports from the IOM - B: IOM cannot get blades thermal probe reading (2); IOM - A reports: reading from thermal sensor do not offer blades (2) any suggestions on

We took an extended power failure, and one of our FI does not come back. We reset the power on it, he'll be back, but there is no hope. Connect a console to this topic and start again explained the problem as a corrupt image.  The question I have is

Hi Experts, I deploy a virtual server of telepresence on media pluralistic 400v and I check if there is an ESXi already installed to deploy the virtual machine. This is a new server and first turn it on it displays "cannot find the boot device, a new

We have a nexus 1000v and hyper-v .we try to do a load balancing between two computers virtual hyper-v to work with nexus port-profile I used the config of the blow for port-profile profile port vethernet MS_Load_Balance type no static-auto-learning

It's probably been asked before, but I couldn't find an answer. Can I download and use a blade firmware that is greater than the UCSM version?  For example, my UCSM is at version 2.2 (3d), but I want to install a package of 2.2(5b) blade firmware. Is

Hi all is there a documentation on installing usc blade m240 m3 you blade chasis. Please if any link or guide. Thank you Hafid

Hey members,. I use in this critical error on my UCS Manager. Member of San 1/12 of the Port - Channel on interconnect fabric A is down, subscription to the bottom. It worked before. After an upgrade if this message began to appear. Someone has an id

I asked this question of TAC and got a vague response, so I was going to post here to see if someone had actually done this and what were their results. We have a fairly basic config of UCS currently, there is a port on each fabric channel and our up

In my environment of UCS that a major alert was triggered about default key ring, the certificate is not valid. Will be the production of that impact, and that means this alert?

Hello I'm working on the deployment of new virtual LANs to my UCS Central with the UCS PowerTool Central. Anyone know how I can configure vlan org permissions? I know how I can put it on the console, but I can't find the cmdlet for powershell Control

Dear Nicolas, I need a help. I use software RAID. But when I give Windows 2008 R2, I did not find the driver of 20 c. Please help me who Relase of version of the software I need to download form cisco. https://software.Cisco.com/download/release.html

Dear all, Hope everything is going well... Here is the error I encountered during the installation: While Installting and UCS C220 M3s server configuration & initially map is with card UCSC-RAID-MZ that supports RAID 0/1/10. Now I replaced it with UC

I tried to find appropriate measures to upgrade to vCenter 5.5 to 6.0, but so far have not found a good guide. We are already in N1KV 5.2 (1) SV3 (1.5 b) due to security bugs, but now we need to plan the upgrade to vCenter 6.0 Here is my plan: 1 put

Hi all My client uses UCSM 2.2 and we want to enable the WoL feature. I understand that now, we can use mgmt OOB or inband what IP that are attached to the service profile. From the network point of view, I would have preferred using band when possib

Hi guy, Nice day! Today, I spend all day looking for the solution to this, but it was a bad day for me. I have access to the server cisco UCS 220 M3 Mmic and when I clicked the button on console kvm on the page group MMIC, the kvm and vm tab does not

Hi all can anyone share North for related Web Services Guide? I am trying to download from the site of the documents: http://www.Cisco.com/en/us/docs/net_mgmt/datacenter_mgmt/Process_Orchestrator/3.0/Reference_Docs/NB_WebService/NB_WebServicesGuide.P