Cisco DataCenter

Hi all We are trying to install ESXi 5.0 on Cisco UCS C240M4 server and during loading of the VMware purple screen with the following error Bora/vmkernel/hardware/apic.c:1913 and bora/vmkernel/hardware/apic.c:1915 NOT_IMPLEMENTED NOT_IMPLEMENTED.

Hello I have ucs and I need to boot from SAN I need to confirm something When I was installing WindowsServer the UCS to boot from SAN. I have attached the iso drivers for the HBA driver so that the blade can detect the boot LUN. Now, I'm going to ins

Hello team, That I upgrade my Mini UCS of 3.1.1g, FI becomes as having failed. Updated UCS Manager successfully. But after activation update of firmware for subordinate FI, FAILURE message. Gravity last Transition time Code ID Description --------- -

We have a requirement where we need to update users with different organizational units with an external system. The integration guide indicates an NSAPI that may be used for this operation, no one create/update. It just says that we must use the XML

Hello I noticed that AS addresses for TCP SYN sent by external device (in my example: GSS device) to the virtual IP address of a serverfarm is perfected OUTOFSERVICE - due to the failure rservers (ARP failed). A context is configured on the ACE modul

I would change the certificate in Cisco ACE 4710 that uses for managing https access to the device. We always get the notice of security from the GUI because it uses a self signed certificate for access to the administration. Please suggest there is

Hello I work with 3 3750Xs in a 'carrot' and we have a directly connected content engine (CE) on a WAE-612 CNSE ce612 - filtering 5.5.23.2 running web services. We use the wccp with forwarding L2 and L2 return with assignment of MASK. The this is loc

I was going through the architecture of the Vblock0 and saw a network diagram where the storage (EMC Celera) is connected to the nexus 5 k instead of connect directly from the fabric of 6100 of interconnections. Is there a particular reason to do so

Hi all We have recently installed a UCS enviornment with 2 x 6100 connected to our double heart 6509 devices. It is set up so that the 2 x 10 GigE rising connect of FAB - A the 6509-1 and 2 x 10 GigE connect b - FAB to 6509-2. Each of the 4 trunks en

Hello I have a few questions on multiple paths SAN using UCS. I will be detailed for each question. Since there is no option to switch to vHBA, should use the features underlying the o/s (e.g. ESX/ESXi) MPIO? I think that MPIO for ESX/ESXi is enabled

Hi people. I have four MDS 9222i 3.2(3a) running.  All four have the same characteristics: DC-cis9222i-01 # sh moduleStatus of Module Type mod Ports model---  -----  -------------------------------- ------------------ ------------4x1GE 1 22 IPS, 18 x

I'm a little worried as to why oversubscription of 2:1 is the best possible between the servers and the fabric extensions (for example, 8 x 10 G of the impeller, with 4 x 10 G uplink Ports interfaces).  If there is no QoS it (b/c there is no switchin

Hi, anyone knows how to implement RAID1 in UCS C200 M1? Thanks in advance Lenin

Hello I have a server blade with the adapter of PALO (VIC) and I test the VN-link depending on the hardware... I configured everything according to the Guide of Configuration Cisco UCS - Configuration VN-link section I see the 2 vNIC on the ESX host,

Hi all I need to create about 100 VLANS on link bottom-up clusters interconnection by UCS fabric nexus 7K, impossible to find a way get UCS learning VLANS use VTP or something like that. I have prepared the list of commands to run with CLI, that's st

I'm having a hard time trying to understand what mezzanine card to use our servers to Blade (half the size).  We currently organize vSphere 4 on servers in a rack with 3 four port NICs installed for a total of 12 interfaces available for ESX.  We do

I'm trying to configure the preposition on WAE - 674 s with version 4.1. I can access the file server partner sharing a standalone with the domain/user name and password. On the preposition of centralized management GUI Windows, when I push the butto

First of all, I read the Cisco Content Services Switch redundancy Configuration Guide for version 7.40 and version 8.10. I am active-backup VIP and Virtual Interface redundancy configuration. I like Cisco documentation, but sometimes I can not just t

Hello I investigated the use of the unique CSS11501 box to meet a specific requirement of customers for what follows. A sticky connection to a Winframe Cluster(client side) to a backend via a VIP web servers. The reason for the sticky connection with

Hello I have a few questions about SSL certificates and CSS. I have 2 servers web CSS 11501 and 3, certificates SSL how do I need? I want to configure the CSS as active - active, is - this supported by using the SSL acceleration module? If this is th