Cisco DataCenter

Hello I have 2 data centers connected through a tissue of spine / sheet using BGP EVPN. In a domain controller, I UCS and other legacy Dell ESX servers connected to catalyst switches. These are shared resources via a VPC local 9 k leafs to interconne

I'm currently looking for ways to make Cisco BE600M to auto-off using the Businness APC PowerChute Software. Is it possible that I can do the Server shut down when the inverter reaches certain level of battery percentage using the PowerChute Software

Hello! Expert: If I add additional physical disks to a virtual drive group existing, data in the current PDS Group virtual drive can be damaged?

Client a BE7K servers (M4 UCS C-240), it came pre-installed with ESXi 5.5 and 4 virtual drives, each virtual drive is configured with RAID 5. Now, we need to install a UC application that requires RAID 10. We use not one of the data store for any gue

Hello Our client has UCS-C210M2-VCD2. It contains 10 146 GB 15 K disk RAID 5. Drive 146 GB 15 k of Cisco are in EoS... Two of them indicate a problem. We can replace it with Server supported 300 GB 15K drives? can we use Dell 146 GB 15K disks?

Hi guys,. First of all, thank you in advance for your comments. I am a worker of cisco. A customer bought UCS C-460 with SSD of 12, 3 TB each. He got no RAID controller, this is just JBOD. I try to install RHEL 7.2 on it, as the user has requested [h

I am able to Cisco bug reports and don't know how to interpret section "concerned admits communicated." The bug listed in the title has 2.2 (1A) A and 2.2 (6th) A listed under the above section. I am not clear as to whether this means that these rele

I have 2 iso policies of vmedia pointing two vmware (5.5 and 6.0).  When I try to change the strategy of vmedia go in the service profile, sounds like he accepts the change, the new vmedia policy is present after that he sent.  Then if I try to click

Hello I have a B200M4 with a UCSB-Mraid12G and Firmware 2x300Gb SAS HDD 3.1.1e (2 x 6248 upward). I would like to create a Raid 1 with several virtual disks (3x100Gb). Is there a way taken in charge to set up the Raid Controller to present several VD

Dear all, I have installed & configured the hypervisor, its running fine.  But the servers are connected directly to the nexus & there is no FI here. But the business must virtulize the adapter VIC & use for multiple purposes such as vmotion, FT etc.

Hello I noticed in the bundle of series b of 2.2.8a MK81 VIC firmware version is 2.2.3b (UCS m81kr - vic.2.2.3 b .bin), I guess it's okay. The blade that I'm upgrading is a B200 M2. Thank you

I have 2 switches x MDS9148 which are mainly used for connections to the servers fibre, without, RecoverPoint devices, etc. I added three servers to ports 25, 26 & 27 but when I open the device GUI Manager, these ports are showing a red cross on the

Guy I have a service profile that has first 6 cards, 10 hba and a boot from the local disk and then cd and then lan order When I try and attribute this to an M3 B200 or B420 (both have local disks), then I get the error "there not enough resources ov

Hello We organize several servers UCS blades in two areas of the UCS. In all areas, we configured an IP ext-mgmt pool to join the MMIC of the blades. As our two infrastructure is developing, I was wondering if we could use the IP addresses that we us

Hello world: could you please help me?  How to set the port to the MDS9124 mode?  When the UCS mini connected to MDS9124.

Hello We are running out of free ports of 10 G of environmental Nexus5K and until the extension of the network is added, I plan to connect third-party servers (Del, HP) 3rd in the FI6248 that are used only for Ethernet. I couldn't find any documentat

Hello I have server-ucs240 M3. I want to configure smtp to alert. My MMIC version: 1.5 (4 d). The server running VMware ESXi 5.1. How to configure?

Hi all. Small question: what FPS do we need on our Cisco Nexus 5 k to connect to a server to 10 Gigabit Ethernet, if this is going to be connected with a CAT7/RJ-45 UTP cable? We have several SFP modules that work with fiber on our Nexus N5K C5596UP,

Hello What are the advantages and disadvantages of the double-Homing s Fex to N7K ruunning vPC mode. Double-homing will allow vPC connectivity for guests such as servers? Thank you Pradeep

Hi all due to my lab, I have some problems with Nexus 1000V when VEM cannot add in VSM. + VSM has already installed on ESX 1 (stand-alone or ha) and you can see: See the Cisco_N1KV module. Status of Module Type mod Ports model ---  -----  -----------