Cisco DataCenter

Dear all, We have configured the UCS successfully Manager & got OS installed, LUN is mapped to servers. We have given a static ip address for KVM access on inventory... > tab CIMC & tired to use UCS Manager IP for the configuration of fencing, but we

Hi all a problem of validation has no port on the Cisco ucs FI sfp interconnect 6324 fabric. We tried to insert the sfp (DS-SFP-FC8G-SW) in the port number, 3 or 4 on the interconnection of the fabric and we immediately see "" port ether 1/3 on the f

We have some old 5558UP-FA switch Nexus one running on 5.0.3 version and it was very noisy, I checked it was the speed of the FAN. (it is not in production) switch # sh fan retail environment Fan: --------------------------------------------------- M

Correctable ECC should not flag DIMM Inoperable or degraded: CSCuw44595 https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCuw44595/?reffering_site... TAC engineer claims that the infrastructure AND blades must be migrated to 2.2.7 for this problem! Q.

Hi all His new installation of Cisco UCS with Brocade SAN switch 6510. I followed the Cisco UCS to Brocade connectivity Guide. Even if the switch side so FI link is not coming. No lights are glowing. When I checked the switchshow @Brocade 6510, ports

I'm new to the unified fabric and try to understand it. There are clients who connect fabric connects directly to switch MDS without any Nexus 5 K between the two.  If the fabric of interconnections are able to provide connectivity to the LAN and SAN

All, Can someone tell me if this is supported and if yes where VM - FEX the drivers can be downloaded from. All the documentation seems to suggest it is possible, but when I download the ISO C series drivers, no VM - FEX directory is found. Download

What to upgrade to VMware ESXI 5.5 Enterprise Plus to ESXI 6.0? It s posibble? We have 3 servers in collaboration with Vmotion, VMS and startup files live in the SAN. Cisco UCS C260 M2 Characteristics Description quantityCache CPU 2.13 2 E7-2830 105W

Hi all I'm new to Cisco servers and we bought 3 servers UCS C220 M3. For one of them, I would like to had installed an operating system Ubuntu (14.04). I tried hard but unsuccessfully to install the operating system on the server. On this server, I h

Hello We run a laboratory for a future project "installation program of the bunch" - Cisco fabric interconnect with FEX. Installation of the laboratory is 6120XP version 2.5(2a) and 2232PP FEX, yet it maintains off trowing erros. An error that comes

Hi all We deployed the supervisor of BMI of Cisco for VMware yesterday. So far so good - everthing is running. Later, I added 2 M4 Rackserver C220, the connection status is success, but the Message of connection said, the connection failed: 2.0(10b)

Hi people, I need help!  I can't get my server to start the ISO ESXi. "Reboot and select proper boot device . " or Insert Boot Media in selected boot device and press a key" Brand-new environment UCS skewered and wired 2 weeks ago.  4 UCS C240 M4 S2

WSF for new blade in the acknowledgement of receipt does not reach 3% (see BMC inventory) Blade - B440 M2 Chassis - 5108 AC2 Firmware 3.1(1g)

Hello First time to work on this model blade. Doesn't seem like there's mezz for this card. When I go to create a service profile he says no available vNIC. Any information would be helpful. Thank you

Infrastructure are at 2.2.6d. Customer needed M & GPU NVIDIA, which requires the 2.2.7. B200-M4 at 2.2.6d We have created the host firmware 2.2.7 and this related to the respective Service profile. Catalogue of the ability has been also updated 2.2.7

Hi all I'm new in the world of the Cisco UCS server and am setting up Cisco UCS 5108 blade server. The server has two Cisco UCS 6324 interconnections fabric I did the initial Setup on and I try to configure the ports for the blades. Looking through t

the viewer took end. due to the network fell.As a result of action takenSelected service profile > Server tab is selected right paneThen the recovery server is selected in the action menurun reset MMIC and chekced has not workedthen run reset KVM Ser

When you try to configure NTP servers (using IP addresses) when http would be in UCS C220 servers, received an XML parser error and NTP server configuration did not.  Ideas?

We have installed windows 2012 R2 x 64 picture in a B200 M4 (2.2.7b) blade. We have installed all the drivers of Cisco web page, but that one THAT CISCO VIC ETHERNET INTERFACE (20gbps) pilot was found. The other Ethernet controller was not found in t

Hello After upgrading my UCS to the 2.1(3a) version, an error appeared on one of the blades with a code of F1237 the full message is: LED displays error 1/2 server health. Reason: P3V_BAT_SCALED:Voltage threshold crossed. Type: hardware Cause: health