Cisco DataCenter
Mini of the UCS + 4 switches, no VLAN
Hi all I have a mini UCS with 6324 modules e/s with B200 m3 x 5 blades, each ESXi 6.0 running. I want to uplink the UCS mini with four cables to four switches separated for traffic, and I wish that each host ESXi b200 see four separate vmincs, one on
UCS environment vSphere 5.1 upgrade to vSphere 6 with Nexus 1000v
Hi, I've faced trying to get the help of TAC and internet research on the way to upgrade to our UCS environment, and as a last thought resort, I would try a post on the forum. My environment is an environment of UCS chassis with double tracking, tiss
C3160 Direct connect support?
Hi, I have trouble finding anywhere that will give me a confirmed answer on this. I would like to know if a server with Vic 1227 C3160 supports direct connect mode in the fi. Thank you very much
New chassis ucs to the existing environment
Hello I connect second ucs chassis to an interconnection fabric. How to copy a profile of 1e-2e chassis service and is the Director of the ucs need license and there at - it best practices to this new chassis Thank you
UCS ENIC / FNIC pilot
Hello In what version of the UCS driver version will find Adapter Driver = 2.4.0.13 (FNIC) / 3.5.0.13 (ENIC) drivers. Kind regards TS
Need help w/UCS-B420
Hello I am trying to configure a B420 in our lab, but just discovered 6324 F / I can't stand B420s in the configuration of the UCS Mini. I've read the documentation, and it was not clear to me at the time of the order. It is only when I put together
UCS B200 M3 - reconfiguration of RAID
Hello guys! How everyone else is doing? I have this ongoing project. We currently have 29 B200M3 blades, all running ESX. The RAID configuration on service profiles are defined on the raid1 with two disks. Our client wants to break this raid1 for tha
UCS C240 M4 will not start from the HARD local using MegaRAID SAS HBA 12 GB disc
I have a new server C240 M4 with 12 GB of MegaRAID SAS HBA. I have configured a key virtual bootable (VD0) with 2 SSDS and disks SAS TB in a RAID 5 Virtual Drive (VD1) + global hot spare with 5 1. I installed ESXi on VD0 without any problem, but the
UCS-Mini vNIC speed subframe
Hello We have a new UCS-Mini with a connected secondary frame, we have identical B200 M4s filled in each chassis, ESXi running. At a level of vCenter that all the vNIC reported for the blades in the main frame are displayed as the 10000Mbps, while al
Updated UCS c220 now cannot access MMIC
I've recently updated one of my servers UCS C220 with the huu Cisco 1.4 something to 2.0 (9f). I said to all move so he just did everything that he is requiring the upgrade. Now when I try to log into the the green bar MMIC rises, flashes and says
Best practices for the Manager of the Ucs to the smooth running of our environment
Hi team We are remaining with data center with Cisco Ucs blades. I want the best practices guide Ucs Manager Manager of Ucs check all things configured correctly in accordance with the recommendation of Cisco and standard to the smooth running of the
CAW: etherNiErrStats crcDelta
We have recently improved our UCS Cluster of 2.2 (3f) to 2.2 (6th). I haven't used the automatic upgrade, I used the set of instructions provided me by TAC. Since the upgrade, the my IOM (2208XP) raise the following errors: sys/chassis-1/slot-2/fabri
UCS-SPL-5108-AC2 / / change of Code UCS-SPM-5108-AC2 -.
Hello I was looking for the Chasis 5108 bundle, we have acquired before the P/N following (UCS-SPL-5108-AC2). I see the P/N changed to UCS-SPM-5108-AC2; but I want to make sure that the configuration on the inside is the same as the old P/N. Thank yo
Plant of the UCS 1.2 (1f) TFTP question backup
I noticed that a TFTP backup (full-State) of the UCS Center on version 1.2 (1f) does not work as a restoration, however if you run a local backup in the center of the UCS and download the file, you can use this one to restore via TFTP Obviously it's
Inaccessible MMIC
I can't reach my MMIC, but my hosts are running and I don't see any issues regarding network connectivity. Anyone know why?
How to create a USB key with HUU for UCS
Hello I have 4 UCS C220M3 requiring updates and I downloaded HUU2.0.3d - 1 for that in the ISO file I really want to use a USB key to start the UCS of the box before I shipthem - so there is no network can - just out of the box, boot on USB via F6 an
Garbage in Orchestration server entries: responsibilities
I see in the Orchestration server properties of the my CPO - tab of responsibilities, there are 3 entrances for subscription AMQP. On the 3, I use one in some of my workflows. But the other two "unknown (some id)" is not available in the POC and not
YOUR 6.1.0 / JDEwards E1 are unable to get the version report
Hello I have a problem: YOUR 6.1.0.133 JD Edwards 8.98 Any standard UBE version is OK, but all the non-standard versions fail to be selected with the error: Impossible to detail UBE, please try again. (XML query failed: Version TEST1BU is not availab
Evolution of the data center: N7k or C6500
Hello I am curretnly studying how our data centers evolve. For physical physical architecture: -We have 2 data centers, L2 interconnected at 10 Gbps. -On each data center, 2 x C6500 serve basic and distribution at the same time. -The access layer is
iSCSI to FC
My office is planning to migrate our current storage and VMWare infrastructure for iSCSI to FC. I'm not well versed in the side storage of things, and I wonder what kind of material we need to achieve. We are not a major operation and would require