Cisco Security

I have a cisco asa 5510 configured to work exactly as I want it, except that customers do not get a dns server when they connect. I thought that the presentation text below should take care of this, but unless I specify the dns on the client, it does

I'm after abit of consultation. I have an ASA 5510 in my hub, static public IP address. Then I have an ASA 5505 like my talk, with a dynamic IP address. I used a dynamic encryption with PSK card and everything seems functional. One of my concerns are

I set up a VPN for remote access using IPSEC on an ASA 5550. All user and group configurations are completed. A VPN session is established using the Cisco Client software, but I am not able to access the internal network.  Any suggestions?

We have two ASA.  We set up just VPN site-to-site.  For some reason, we are not able to access internal resources at the main office of the remote office.  Do you have any suggestions?  Thank you.

Hello I'm trying to set up the tunnel WILL map HWIC Verizon - 3 G-CDMA per Verizons document. Does anyone have a backup on EVDO working? PDF schema - attached Verizons - plug The relevant commands are below HUB END interface Tunnel0IP 192.168.255.89

Hi all We have unique VPN concentrator which is the single point of failure, so need your help to mitigate the same The topology diagram is attached Site A and Site B. Site B has internet gateways where we have existing VPN. The intention to introduc

Hi all Can I have an example configuration of a vpn for remote access to work for cisco router 1800 series? My cisco 1800 series router already a site to site vpn, so can I still set up a vpn for remote access using the existing IKE policy? Is it tru

Hi all Asked me to configure the load balancing between two hub Cisco VPN (Cisco VPN 3030). I set up two such boxes mentioned in the cisco Web site [url] https://www.Cisco.com/en/us/products/HW/vpndevc/ps2284/products_tech_note09186a0080094b4a.shtml

Hello I had the question as below Site A - 1 unit of VPN Netscreen firewall Site B - 2 units of ASA VPN firewall I'm trying to set up a VPN from Site to Site, but a problem with the configuration of the active standby. Initially, I tried Site A 1 uni

Hi all First of all I know that I can activate the SSL interface inside, but that's not what I need or want. Scenario: Several interfaces and VLAN on the SAA (running 8.0.5). SSL VPN configured and enabled on the external interface. Need to know if i

Hello Past VPN access required not either of these programs. But recently, the organization I work for has implemented "client anyConnect" and "clean access agent" VPN access. I wonder if this one is any way allows remote access or access to my files

I have 2 routers doing GLBP. The virtual IP address is given to jobs as a default gateway. When a packet hits the default gateway, it will go to RTR - A. Then the second package request will go to RTR - B. It's all good via GLBP. The question is, if

I have inherited a VPN concentrator and want to configure it to provide remote access to my internal laboratory network when I'm traveling.  Private interface is configured as 192.168.1.240/24.  Public interface is configured as one of my public IP a

We have VPN 3005 concentrator.  I want to create a local user for authentication purposes.  This user has all permissions.  For example, after the Cisco VPN client has been installed, I want users to use this account to log in to ensure that the oper

Hi all I'm going to HO and BR Office connected using DMVPN. It worked before but suddenly it has stopped working. HO is to have a contract line rental and the branch having DSL link. It will be very appreciated if someone could help me solve this pro

Hello Can anyone explain me what this means: Show interface Tunnel Tunnel of transmission bandwidth 8000 (Kbps)Tunnel to receive 8000 (Kbps) bandwidth Is VPN bandwidth? If Yes, we change it? Thank you

How can I test the MTU size, through an IPSEC tunnel to an ASA 5520 to an ASA 5510? I have fears that problems with my equipment are due to the insufficient MTU size.

I have the following Setup and I can't seem to get the next tunnel. My end is a PIX 515e race 7.2 (4). The other end is a Cisco router-not sure of the model or version of the IOS. PIX: 90 extended access-list allow ip host a.a.a.a host b.b.b.b NAT (i

I have a router Cisco 871, which must be configured to allow outside laptops to connect to the corporate network. I used Easy VPN ServerWizard in CCP to create the configuration. After the use of VPN test, everything looks OK. Unfortunatlly I can not

I use two ASA 5540 in failover active-standby configuration. These boxes (primary and secondary) are used to establish some L2L and VPN RA (remote access). The active area run the OSPF process. The problem is when the failover (blocking just to the b