Cisco Wireless

Dear all, Can I use 1552nd controller with 2504 wireless controller? and if cisco has any design with this type of AP, please help me, thanks

I configured the device manually, not even using quick or Express security configuration then... it's possible that I missed something. Anyway, here's the problem. Although the SSID is configured as 'AP1', this SSID is not among the networks availabl

All, Could you take a look at my enclosed config and comment on whether or not I'm set up to support N or G only? If I run only G, can you recommend the configuration commands that will allow G & N support? This 801AP is built into my router 881W.  T

I saw a 7.0 and I think that the 7.1146 (is that an early release?) I have not upgraded in a year and would like to now since school is out. I also use the WCS system as well and did not know if there was an upgrade for that since last year.

Hi guys,. NIC 1 I want that all cable customers (PC1 to PC9) in native VLAN 1 and all in VLAN 10 wireless clients. 1. is this a correct network card? 2. given that all the wireless clients are in the same VLAN, I guess I should configure port F0/10 m

Users connected to the AP1131G cannot get DHCP! Hi all I hope that we can find a solution for my problem. I have access point AIR-AP1131G-E-K9 and connected to the switch 2960, under port configuration is: interface F0/24 switchport mode access switc

Hello I have a 1242ag AP stand-alone series. I want to broadcast more than one SSID. pls tell me the step by step approach considering I am new on the basics of radio a g etc.

So I understand now what I need to do with regard to the addition of a certificate of party 3rd in my WLC to allow users to access the login screen without getting a warning from "trusted site".  My next question is which certificate should I buy?  W

Some corporate users are unable to connect to the wireless company. On the WLC, I get the following logs: Authentication failure AAA for UserName:dto029 user Type: USER WLAN The GBA, I get the error: Authentic doesn't have a default group for ACS use

Hello community, I have a question about the function of redundancy for both WLC 2106. We have installed on a client 2106 and 6 AP site 2 WLC primary and backup WLC works very well. No customer asks the question if there is an option to copy the gues

Hello, Cisco Support Comunnity I have a problem that I hope you and you can help me We have a WLC 4402 in our network, we have 12 AP and we have three SSID that is assignment of IP addresses of three different DHCP pools configured in router base, th

I know how to access the graphical interface from the service port. However, I am not able to access the site of Port 0. IPs have all been set correctly. We have a management VLAN in our company. I have configured the management interface of WLC for

I have a new 1142N AP configured in stand-alone mode, 1 VLAN, 1 SSID and I set up a pool dhcp on the AP and the device of the SAA which is used as a router/internet access. Also, I have a server radius IAS MS configuration and work. Viewer MS Event p

Hello I have a Cisco WISN running the 7.0.116.0 version and it works very well with a lot of access Cisco 1131/1232/1242 points. But with one I have a problem. He has worked and loaded the flash image and got the ip address controller and began to sh

Hello world I am thinking to replace an AIR-WLC4402-25-K9, which runs on the code 4.2.61.0 with an AIR-WLC4402-50-K9 running on 7.0.116.0. Can I back up the configuration of the AIR-WLC4402-25-K9 and restore it on AIR-WLC4402-50-K9? Otherwise, what i

Hello I have a few APs 1242AG to convert standalone in LWAPP mode. The conversion tool (v 3.4) keeps giving me an error saying that there is a list of firewall or preventing work TFTP access. It is this time I use the internal TFTP server in the tool

Anyone know the difference between these 2 versions WLC?  I did a search in the release notes and 7.0.116.0 - ER is not even not mentioned.

Given that the new laptops have more the PCMCIA slots and Cisco does not sell a compatible card, at least no I can find, will be their tool of survey construction with integrated maps?  I need to do a site survey for the implementation of a MESH and

Hi, we are looking for by deploying Wirelss on our corporate network. There are a few branches and a central office, we want to use if possible a unique WLC which will allow the two traffic users internal and invited so that isolate traffic comments.

the following example shows how to associate with a WAP to a Cisco router access point: ! http://www.Cisco.com/en/us/docs/routers/access/1800/wireless/configuration/guide/s37wep.html#wp1037774! universal client configuration example for encryption of