Cisco Wireless

Evening, I have a number of AIR-AP1231G scattered in my factory. All are fed power inline injectors and are working properly. I am wanting to buy a number of PoE switches that will have the task off the injectors inline for an easier game to the top.

Guys we will deploy about 50 of the most recent WAP 3502i soon to a remote location hosted on switches catalyst especially 3550 and 4500. My concern is the ability of these PoE power switches correctly to the most recent WAP. Can someone tell me if t

I have a question setting my AIR-AP1231G-E-K9 access point model. I'm not familiar with Cisco technology, but I can't be able to use the hyper terminal. Could someone help me configure my access through the hyper terminal point. I much appreciated fo

I've got a few 1142n -E- k9 on ebay, but should have obtained 1142n -N- k9... Thought I checked it first, but the Australian site, I went to that sold the bad ones too! @### so it will not register with my controller 4402. I have 2 options, I guess t

I have web auth enabled on the WLC so when clients connect, they get a cert error because it uses a self signed cert.  I was reading upward on obtaining a third part cert and he tells have openssl and then generate the cert and send it to a third-par

Is there a way to not require a certificate and https for web passthrough this way when customers are redirected they do not get the certificate error?

I have a question I would like to check with you.  I 1142 802.11n APs autonomous, with antenna gain set on 0, how would I know the access point's default emission power?  I know this may seem like an inappropriate question.  I am doing a study of cov

One of our customers to whom we are provinding Wireless solutions, with 60 Cisco WLAN AP, it is confgiured with 3 of the ssid. They have envionment WDS. Now, some end users out there (AP-associated) in construction to complain that they have been fac

Hi all, I am trying to connect to our aironet through serial connection, but there is no output on the terminal. Help, please.

Hello We have a pair of AP1242 configured as point to point. He worked for centuries, and then all of a sudden the guard falling radio link. There is no change in the configurations and equipment and the way that he setup. The values on the two AP si

Dear members of the Forum, I work a 1142 standalone AP configuration file BELOW, 802.11n. As you can see I have 2 SSID, different comments and Corporate, belonging to 2 VLAN, VLAN 30 = comments and VLAN 230 = Corporate. VLAN 200 is my management VLAN

Hi all I try to fill 2 VLANS using 1 one ssid but failed. The APs are Cisco AIR-AP1242AG-A-K9. Here is the configuration. Please help find the problem or share a sample of the configuration. Thank you very much. -------------------------------------R

Hello Experts, We are in the process of purchase of 5 1131AG Cisco AIR-LAP1131AG-E-K9. However I have some doubts to clear a. first of all, we don't have WLC b.Will AP have IOS? What version it will be. can c. I convert their AIR-AP1131AG? d. or keep

I had random LWAPP that were configured previously appearing as the original names as if they were just installed (APxxx:xxxx:xxxx). I know because the location field is the location of where they are, and the name of the AP group is also set to the

Hello We have Cisco LAP wireless environment, The WLC is WISN (software version is 7.0.98.0), access point is Cisco 1142. We have a user with HTC mobile phone (OS is Android 2.2) can not access the WLAN (WEP key + WEB-based authentication), it must t

Hello I have a requirement for the installation of outdoor 1400 in Bridge mode access point. customer got three remote sites connected by 1400 outdoor access point. but I fell on the light and stand-alone version where I'm quite confused. which versi

Hello We have a 4400 WLC, validate users against FreeRadius. Don t of RADIUS accounting messages appear the names of TOUR but the MAC address of the APs. Is it possible to change this behavior? Thank you.

Hello everyone, we have the installation program LAP1042 2 with a controller 2106. They AP are connected to ports POE 7 and 8 of the 2106. The management interfaces and ap are on port 1, are in the same subnet and are not marked. We configure WLAN, o

I'm new on this the integrated router and AP I followed the basic config and have it work. I can get to any lan or wireless internet network. Now I want to configure a VLAN for the wireless side that cannot not get the cable lan, just released to the