Dell Servers

Dell administrator and specialist out there, I need help! I have a VRTX and 2 nodes of Cluster of Windows Server 2012 Hyper-V running. I want to migrate to Windows Server 2012 Hyper - V R2 cluster (using another 2 blades) but will use existing storag

I hope an easy answer, but I have a firmware and driver update for my PERC H700 and ask yourself which must be installed first? Is it still important?

I'm planning to add some memory to a Dell T420 and trying to figure out the order number. The system shows it as having delivered with the two numbers 0146H and P9RN2. It's in an original Configuration for my service tag. But the system is supplied w

Hi I have a Dell r610 but it takes a few seconds at startup I had 48 GB of ram, I just checked that everything is ok regarding the ram, hard drives, my bios is version 2.0.13 What can do to optimize it? Thank you

Hi im trying to install my r610 updates using the USB with the Manager repository by selecting windows x 64 pieces, but when I try to install on my server, it shows no available using Dell Lifecycle Controller update why is not indicates updates? My

I have server Dell PowerEdge R720 get an error in DDR3,. Error: Initializing memory detected caveat DDR3 lack of training - FPT - write DqDqs Sun... and everything, how o solve this problem?

Dears I have Power edge T620 with PERC H700 and 4 HDD 500 GB Raid 5 and give me to rate and foreign one another, the ESXi 4.1 and ESXI Server upward host and run, but whenever I have tray to start one of the virtual computer system failure, now, I ha

I am able to download the installer.exe for the RAID, but what I really need, it's just the driver.  I need to put the driver on a USB drive for the files during the installation of my Win2008R2, not a .exe.  When I run the exe on another computer to

Hello I downloaded the Dell DVD ISO - Dell Systems Management Tools and Documentation, v.6.5.0, A01 files OM_6.5.0_SMTD_A01. ISO.001 and OM_6.5.0_SMTD_A01.iso.002 but can't seem to find instructions on how to make a large ISO file. Help would be appr

Hello What is the difference or the benefit of making the RAID groups or virtual disks for a RAID configuration? For example, what is the difference with the situation below: PERC controller: 0, RAID 1 disk group -ID: 0, 1 virtual disk with 2 physica

Hello On what level is this possible? Can I mix SATA and SAS disks on the controller RAID (PERC H710), group or virtual disk level? Server PowerEdge R720. I want to be is: PERC controller: -2 SAS HDD in RAID 1 connectors (for the operating system) -2

Hi guys,. My first post here so excuse my violations of Protocol if everything... My client had a current Raid5 config with 4 x 500 GB drives. I've upgraded to a new Raid5 with 4 x 2 TB drives and hit the wall with the 2 TB limit. My question is - ca

If I have a Raid 5 array in my R710 and want to add an additional drive that is not part of this raid, which will force the Raid 5 array running at the speed of the new command - aka the smallest common denominator.

I'm stuck with the help of a Dell R715 as a backup server. This will be my main storage for backup data. Is it possible to change the drive in the cages with 2 TB drives? I am currently under the disks 1 to - 4 and 2-146 GB. 4-1 TB drives are Raid 5

Hello We have a PE T610 with a PERC 6i controller. X SATA 1: 2 250 GB virtual disk in a RAID-1 X SATA 2: 3 500 GB of disk virtual in a RAID-5 We have added 3 additional 2 TB drives to the server.  A drive has been designated as a Global Hot Spare.  T

Hey guys, I was hoping that someone out there has had some information about the nature best practices or the best settings for these two configurations of a Dell 2950 with PERC 5 controller / i. Senario 1 Reference Dell 2950 Windows Server 2003 Ente

I lost inadvertently communication on my hard drive for the OS and Raid 5 data readers.  Currently I can not start the server and need assistance in getting to the top.  I installed 3 new drives to set up a backup and during the process, I've dethron

Hi, wonder if anyone can help with this problem we have seen with our power edge 2850 ([ADMIN NOTE: Service tag deleted by privacy policy]) A few days ago raid completely stopped working. Citing the firmware. has been corrupted. And I couldn't access

Hello I have several R320 servers with quad port NIC broadcom. I would like to configure the collection of NETWORK adapters on the Server 2008 R2, but I couldn't find a download on the website of Dell application, could someone ' a please point me in

Hi all So we made a mistake on our order of Dell Server PowerEdge T620.  We ordered as a half-rack server when the client needs a server in a tower configuration.  We need a kit or the numbers of room but a simple that will allow us to put a lid on o