Dell Switches

Hi all We just bought a PowerConnect 3548P. I configured an IP address, user name and password on this subject by the console then configured using the web console. I unplugged the power subsequently. I found all the configurations (settings after th

Hello I would like to know if there is a way to enable web management on a S55 dell force10 switch. Thank you.

Anyone know if there are plans to extend the OIDS supported for the 6xxx series? Specifically, I am interested ipNetToPhysicalTable - 1.3.6.1.2.1.4.35 Thank you Scott

I'm sorry if this question belongs to another section, but with regard to the functionality of these switches I thought I would start here. My question is, the M6220 and 8024-K out-of-band connection are going through the connections on Board (for ex

Hi all I need to upgrade the version of the firmware of 2 6224 pwconnect in the stack. I download the firmware and the reading of the procedure, but I have a question. Is it possible to restart the switch one after one? I download the firmware of the

Hello, I'm trying to reset the password on a Dell PowerConnect M6220.  Can connect to the CMC via the https Web page, I don't see how to do it from there. Then I'll try to plug a USB serial cable into the console port and reset the password via a con

Hello, I am have been looking for download of the firmware for the 6224f and powerconnect 6248 happening on the Dell support site.   It seems that this series of switch is more listed on the Dell support site.  I could find firmware a few months ago.

I had just a simple question on Spanning Tree. We have a network configuration and everything is already difficult to implement the tree covering weight on the powerconnect switches if you already have your network configuration is? is it a day all?

I implement port security on our network, and I've never worked with these before switches. I'm used to the Cisco CLI, who was the command exec "int sticky clear dry port", but it doesn't seem to be anything of the sort on the CLI of Dell. Here is th

Hello from France, One of my projects for a client is to create authentication secure via 802. 1 X. I chose to use freeradius. But the customer would not integrate a linux solution. So, I went to Microsoft Windows server 2008 R2 and the NPS. I've imp

I recently inherited a Dell PowerConnect 6248, which I am not familiar with, and I'm trying to use it as a switch Layer 3. I have a 10 of VLAN with a network 10.10.10.0/24 and 11 VLAN with an associated network of 10.10.11.0/24. When I statically ass

Hello I'm new with dell switches, I'm connected to the web console powerconnect 3348 and try to find STP fastport setting. want to make sure that his license. Thank you

Anyone know if there is any parameter to specify traffic on the Dell PowerConnect 2816 or 2824 manageable web?

I am wanting to update the firmware on my Powerconnect 6224 3.3.1.10 Version 3.3.5.5 Version switch.  Is there a problem with this jump or if that's okay? I would like also some words of wisdom as how this upgrade as painless as possible. Sincerely,

Hello. I need to reset the password to enable on the switch, but I don't have a USB-RS232 cable console. Someone has photo of pins of it?

Good afternoon! I'm looking to implement a 5548 in our existing infrastructure. I want to preface this by saying that I am very new to networking. I'm looking to have at least two VLANS separated. -The first vlan for public sites face. These will hav

In order to counter the effect of the DHCP server that is not allowed on my Ethernet network. I need to restrict DHCP BOOTREPLY messages on a specific LAN port on which the authorized DHCP server resides. I tried to read the section "Configuration DH

I have a Dell PowerConnect 5448. I created an acl using the CLI. I have telnet'ed in the switch and created and ACLs on port 19. This works well. He does his job and even after that I reload the switch (or the loss of power of the switch), the acl on

Hello I need to update the firmware on the switches on my stack, the stack consists of 3 all current 6248P to run version firmware 3.2.1.3 Powerconnect switches. I plan to stack in a 4 switch that is running 3.3.1.10 so I need to update my existing c

Hello! Regarding our network admin has left the company, I Don t have access to two 7048 powerconnect switches.Is there a possibility to reset the password without configuring loos? Could someone explain it how can I do this? Thank youDamien