Netgear

I realize there are other threads on this problem but mine is a little diiferent. I just replaced memory in both my Ultra 6 s. The steps were: Ultra unit has Deletion of records New memory installed A run the memory test (past) Replacement discs Fact

Hello I have a ReadNas 102 and lately I have these error messages using the root of the system volume is 95%. After checking the files/var, I noticed that desired used all available space. I had FTP enabled for some files and it seems that the conten

Hello: I bought a R7500 (the box indicated it was R7500v2, but inside, I found a R7500v1) n February 2016. I have about 60/60 (download/upload) when you have a wired connection, but WiFi I have only 50/10. I can understand a 10% drop, but not a drop

Hi all I used my RN2120 as a SMB share for my exclusive Microserver HP for the content to Plex. I have now come to install a double extra NIC in my server and I would like to use the ReadyNAS as iSCSI storage. What I can't work, is to "convert" my SM

Hi all Am new to this - my four Bay Nas got more drives to 4 x 3. But have not yet had the bottle to implement! I don't want to be wrong & may not be able to cancel the bad! went through the manual but can not see the answer to my question - that cou

I am currently a manual backup on USB. The records, I'm moving are large and the process for the first folder is the estimate of 10 hours on the web administration page. My question is if I close the web administration and then page reload the bar of

Hi, I got a ReadyNAS duo of one of my friends, I have replace both drives of 1 TB with a same exact. I booted up the SIN and it showed on the tool Raidar. I got 'corrupt boot' so I followed the steps on the site Q & A. I did a restore and reinstall O

Hi all My apologies in advance if this is covered elsewhere, but I don't the have not found. I have a Ultra-2 with Frontview 4.2.26 (I think it's correct, he is not in front of me now, but this is the last). I use the disks out of the HD compatibilit

Hello I am new in ReadyNAS, I bought this one for a long time but only used for a few days... I try to use again, I tried to upgrade the firwmare the/admin /, but surely a bug appear, because after restart-auto, I can not access the /admin/ with my o

Hello I have a ReadyNAS Ultra 2 with 2 x 2 TB disks inside. I needed to start from scratch, so I went to the factory reset my ReadyNAS using the start menu (press and hold the reset, press power etc), and RAIDr finds my ReadyNAS first so that I can c

Hi allI have some problems with my nas (that I have had for 10 months and more without any problem) until I had a power cut and lost a player... I have now replaced However when all disks are connected disks (4x2TB red WD) may not start normally. sor

I plan on modernization of our old router, and I am seriously considering the Nighthawk AC R7000. When I do, I also intend to upgrade our present security WiFi WPA failing Nighthawk, WPA2-PSK (AES). I hope, however, to keep the old router same SSID a

I keep seeing this MAC address in my journal by e-mail, F0:A2:25:04:27:37, and it is NOT in my list of devices ALLOWED or DEVICES CONNECTED to the router? Sent newspapers: [IP DHCP: (192.168.1.6)] at MAC address F0:A2:25:04:27:37, Sunday, Oct 11,2015

Hello my router disconnects randomly WAN in intervals ranging from 2 to 30 minutes for 5 to 30 seconds. My ISP gave me a Technicolor TC 7200 modem, which is connected via a network cable Cat5.e. My network usually consists of ~ 8 devices: 4 wired, wi

I bought this router on July 7, 2015. I was able to set up fine, and it worked perfectly. All of a sudden, it stopped work. It won't send a signal wifi on any of my devices. I run on Windows 8.1. I could connect my old router netgear very well, but I

My router DG834 is eleven years old and fine. However, I am aware that it is old and am looking for a suitable replacement. I do NOT use WiFi connections not always, so please do not suggest switching to it. The House already has wiring/CAT5 in the w

I just bought this new modem/router and set up according to the instructions. All lights are to the Green (or blue 5 GHz), but when I tried to open a browser on PC, I can't get a connection. All my cameras wifi in the House (I have 6, 2ipads, 2phones

Hello I have some users with Windows 7 and MAC laptops inside my network domestic who is protected by the R7000. I'd like know if its possible to block sessions VPN and Proxy, initiated from these internal, to communicate with Internet computers. Tha

I bought a R7000 now a week ago. My other router continues wobbly on me, could not take any charge for an amount of time and was generally an unhappy experience. Now to my problem with the R7000: I keep having random disconnects. Meanwhile, the inter

Hello I'm moving my FVS318G to 3.1.1 - 08 but it doesn't. I have download the new firmware and the progress bar starts but after a few seconds the browser page refreshes then and a connection reset error is given. I tried to reboot and download it ag