SanDisk SSD

Hello I have a SSD Pro Extreme Sandisk 240 GB on my system. I've seen it can be detected and status verified by the dashboard of sandisk. A big company like Sandisk, which looks very bad for me, because it's a very long time (YEARS) the dashboard doe

I write here out of pure frustration, and Yes, I'm evacuation. 6 days ago, I had a 480 GB Ultra II failure.  After a days worth of troubleshooting, all results pointing to the unit, otherwise, I presented a request of RMA to Sandisk (drive purchased

I bought two SSDs to 960GB SanDisk Ultra II for installation in a Late 2009 27 inch iMac and a MacBook Pro mid-2012. I could absolutely not anything other than a white screen on the 27-inch. I could get the external computer to boot via USB, but when

Hi I just got an i100 for my machine. Dashboard running it reports that there is no alternative to re = attribution block he said threshold is 5% but display 0%, short and long test fail because of this. He said also 11.50.00 firmware is up to date a

IM using the Dashboard SSD 1.4.2 and im wanting to clean up a Sandisk SSD Plus 120 GB SSD. However when I click on the page of disinfection, it does give me not an option to create the startup disk USB (despite what the documentation says)? Im runnin

Hello New Member looking for advice on where to start with maintenance of Sandisk ssd firmware update. I use an SSD on an acer AOD270 netbook. So, small screen, no CD drive etc. I couldn't not, fo are the life of me, get my Win7 starter HDD cloned on

No possibility of misunderstanding I hope? The operation "sanitize" works for 3 hours now. No message, no error, nothing happens... Performance monitor Windows shows no activity. The pop-up in the dashboard shows always fair "In Progress" Although th

Hi all I just bought and installed an Ultra II 480 GB on Macbook Pro mid-2010 with El Capitan.  Trim is not enabled, I endable it? Thank you.

Hello I wanted to save my SSD, but when I send the registrationform, it returns 'invalid for this product product Code'. What I can do, or is a number other than the required serial number? Thanks in advance. Achim

Hi guys, I used to have the OS in a typical hard drive, and I used a program to clone my new SSD. Everything works well, and the system got faster. But there is a big problem, I can't determine what is the cause. Smart written GB total value going up

I just purchased & installed a reader of 960 GB attached to the SATA III connections on the card mother HP Z820.  Disk Manager 10 windows sees the drive, I am able to use it wisely, but the dashboard software will not recognize the drive. The clues,

My Dell XPS8700 desktop computer does not recognize my Sandisk Ultra II 480 G SSD card.  I'm under Win 8.1.  The Sandisk SSD dashboard can't find the SSD drive.  It is connected to the SATA 2 port and I checked the power and SATA connectors.  Any ide

I have two Sandisk Ultra II 240 GB SSD and this has happened at a time using Windows 7 and Windows 10. Basically if my laptop is not closed properly - off without shutdown or restart, the laptop completely failed to restart Windows. This has happened

Hello, I register my new ssd, and I got an error that where saying that the product number is invalid... I've correctly written down but without success... whatever that means? This is no original ssd?

Hello I just installed a new Sandisk 240 GB disk, which works fine, but this isn't the dashboard software. When it is run the window looks like a page html without styling, screenshot here: https://drive.google.com/open?id=0B6wplXOsmxNqbGVKMy1wQm15M1

I got an ExtremePro 480 for my ThinkPad Yoga 12 (4500U i7) laptop and I cloned the 250 original LiteOn SSD. Now my victory! 0 installation hangs on shutdown when I use the system for more than an hour. He busted Windows, I get a black screen and no a

I have a Transcend SSD370 (512 gb) in my laptop and you want to replace it with Sandisk Extreme Pro SSD (480 GB). I have a cloning device that does not accept the card SanDisk as the destination drive because the capacity is lower than that of the so

Hello I just installed a Pro 480 G drive on an old laptop and partitioned the disk 78/368 for OS & data respectively. The disk partitioning will reduce the CUTTING capacity to implement wear levelling on each partition or wear leveling is done throug

Dashboard 1.1.1 Win 8.1 x 64 Sandisk Extreme with firmware R211 SMART short test starts well but once it reaches 80% it stops and everything is unresponsive. HDD LED to stop blinking and only the mouse moves. Nothing works. Duty to force the reboot w

Hello I just downloaded the new dashboard Sandisk SSD. It seems TRIM for my extreme II SSD optimization is gray, although the security status of the drive should be clear (or at least, I saw not a clue showing that it is defined otherwise). Is this a