10 free credits to stock never appeared

Similar Questions

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• The "alt" tag never appears for the photos! ??

  I'm a web designer, and whenever I try to use the alt tag for the images it never appears.
  "Alt" tag is a part of the HTML languageand that of the written word to make sure that the site visitor will see or understand the content of the photos, even if it has a bad connection.
  as follows:
  
  Everything is fine with the width or height, but when it comes with the 'alt' it never appears.
  I tried on IE and Opera, and it works.
  Please if you know how can I solve this problem send me a
  der. [email protected]
  IT IS URGENT
  Alt tag does not work http://www.w3schools.com/html/tryit.asp?filename=tryhtml_images2
  I have attached a link for "W3SCHOOL" hover over a photo and you will find no writing

  ALT is not for ToolTips, this is the bad behavior of Internet Explorer. To display a ToolTip, you must use the title attribute. Indeed, in order to create a real web standards compliant Web pages, you must specify both. ALT is shown if no image is available, the title is for the ToolTip.
  
  See https://developer.mozilla.org/en/Mozilla_Web_Developer_FAQ

  USE: alt="Google Chrome" width="33" height="32" title="my tooltip"
  

• Library of WMP 11 suddenly deleted and the files never appear in the library.

  My WMP 11 library.  I can play the files by clicking on them, but they never appear in the library.  If I try to add folders, nothing happens and these records went into the pane again next time I have to try.  I tried everything I have seen suggested elsewhere until now - delete my library wmdb, disabling media sharing files, remove drive together, same media, delete file and reloading of WMP 11.  Nothing seems to solve this problem.  I can run WMP fine a different profile, but my main profile, the program seems dead Cold Stone no matter what I do.  Any suggestions?

  Hi MingusAl,

  Did you the latest changes on the system?

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start the Windows media player next Fixit and check if it helps.

  Solve the problems of Windows Media Player video and other media or library

  Method 2:

  Since the works fine WMP to a different user profile, you can try to create a new user account and check if the problem occurs.

  How to create and configure user accounts in Windows XP

  How to recover damaged Windows XP user profile

• Problem ladle with Burrito where AIR App window never appears

  I'm all of Google-fu, who have also sought everywhere here and at Adobe, but I was wondering if someone here might have experienced the same problem:

  When using Adobe Flash Builder Burrito, the window for the desktop version same basic app never appears - but that works well when I push to the Playbook Simulator.

  All that happens is the adl.exe process starts. No new window never appears. If I run in a debug configuration, it is obvious that the application runs indeed somewhere, because I can get feedback trace().

  I have installed and reinstalled Flash Builder and tried it on XP and Win7; systems both have the same problem. This is something that has developed over time, as I used to be able to use the desktop very well mode. I tested my own application as well as the tutorial app Playbook in 90 minutes. both work when I load them upward on the Simulator (but not on the desktop).

  I tried to update Flash Player and even Shockwave Player, nothing helps. It's using the AIR API v0.9.2.

  There is some development excrutiating - I need a feedback loop fast since I'm new to ActionScript. The Sim Card takes much too long.

  Thank you! -you guys have been a great resource.

  Is it possible that in the app - xml file, you do not have the visible window?

  true

  ..

  It can be commented.

• I was promised 10 photos free to start stock and I get only 9. How can I get my 10th?

  I was promised 10 photos free to start stock and I get only 9. How can I get my 10th?

  Hi Julia

  Unfortunately, there isn't an option to "unlicense" a picture but I have added a picture of credit to your account, so you can choose another.

  Thank you

  Bev

• If I switch plans will keep I have my credits in stock?

  I'm on a plane with 10 credits monthly stock image, but I don't have as much.  If I switch to a plan that does not include these I will be able to continue to use the credits I built, or they would be lost when I pass?

  Please contact support directly by following this link: contact Adobe customer service.

  For more information, please visit: FAQ: how to contact Adobe for support?

• What exactly is the "free" offer Adobe Stock?

  Everytime I open Photoshop, I get a screen advertising of 10 'free' of Adobe Stock images. I was interested to see close-up photos, but you won't see any not stick, and the small print in the ad said, "refund of a month on Adobe Stock when you subscribe... an annual plan...". "So it seems that this is not a trial offer free to all, as I first thought - apparently I will be charged for the first month if I decide to cancel the subscription. But this page says "Cancel risk free in the first month." Does this mean I will not be charged for the first month of the trial if I have to cancel ?

  After seeing all the harm that other forum users with the cancellation of the subscription after the signing, I'm not sure I want to do it anyway, but I'm curious to know what really is the offer.

  The offer is basically first month free on a one year subscription. You pay the first month and which is refunded to you. Where it becomes 'free', is that you can download your 10 images, then cancel within the first month without penalty. However, if you do not cancel within the first month will be on the hook for the full year or pay a penalty to cancel.

  You are also right that there seems to be no real way to cancel at this time than to post here. If you have not decided on the conservation of stocks, it may be in your interest to spend. I hate to say that as I'm a big fan of Adobe and Stock.

  You can search for images without being registered for a subscription, you can even add libraries without going through a subscription. You can even license single images without a subscription.

• CS2 free version colors do not appear even as my store bought version cs2 - tried everything

  I use a new version of windows on a new computer 8.1 - I was running win xp on an old comp when I went to install my old version of cs2 photoshop that I was forced to download a free cs2 version because mine is not supported more. I did a compatibility check as well on Windows 8 VS CS2 on several different websites and they all come in saying that it works very well. It appeared, but now I have a problem. Outside the registry screen will not go away (I registered successfully, it is always - I chose not register then, he always comes back), I have some color issues. First - know I'm not a techie by any means so I hope my terminology and description makes sense.

  I have an old web project that I completed in CS2 on my win xp OS and software purchased in-store. It is perfect - I like. now, when I open files even on the new computer in victory with the cs2 version 8 free - blue colors are all purple. in cs2 right before opening jpg files - thumbnails appear ok until I click on the file once - which then shows the thumbnail in 'space' with the purple colors adobe - and Yes, the files of all them will open in photoshop with the evil purple colors as well. outside of photoshop, windows 8 and all the partners see the software these files correctly - even online, the site looks normal - the way I did originally it - asking some friends what they see, the feedback seems to be OK. If I draw something in bad purple hue and publish on the web, it appears on the web in the correct blue, I wanted in the first place.

  in adobe, I don't see a lot of color settings and tried all - literally - different combinations (not really knowing what I'm doing). I even had some options set to maintain the embedded color profile with the image when opening which I thought was the solution: he opens all purple. so now I wonder whatever it is that I create, I have to ftp everything that I do on my site and view in a browser to make sure it's okay - it's obviously an ultimate waste of time and I can't go on like this.

  I tried to get help on this through resources not adobe and had only answers to go into the color settings and other responses in a bad mood I should be upgrading to a newer version (I'm a starving artist and I'm already 'borrow' this new computer).  I really want to run my store bought software as well - I don't want to run a free version, but it would not approve the serial number, saying: these servers are down.

  so is this a problem of windows 8? It seems clear that the issue is in litigation of photoshop because the images are very well everywhere else, and photoshop has tons of color settings (I used the default values in my store bought cs2 and the free cs2 - originally, I have never changed a thing - never touched options at all.)

  any help would be great - wish I could show a screenshot but no matter what, but when I capture in photoshop and then view outside of photoshop - color formats are very good...

  It's a broken screen profile. Photoshop is one of the few applications that actually use the profile (color management).

  Recalibrate, or if you do not have a stud, use sRGB IEC61966 - 2.1. Go to control panel > color management > devices:

  

  Restart Photoshop so that he can pick up the new profile at startup.

• contacts created in the messages never appear in contacts or iCloud.

  Have had this problem for awhile now...  Has been hoping the new iPhone 7 and macOS Sierra can solve it but not...

  When I'm in messages (iPhone) and I add a contact, the thread goes to the person... but that never, the contact appears in Contacts.app and is never synchronized to iCloud.

  I tried to disable and re-enable contacts to iCloud unsuccessfully... but if the contact has ever entered in 'contacts', it makes sense that he never gets to iCloud.

  The break seems to be just between messages.app and how he sees the contacts.

  Go to the Contacts application and look in the upper left corner and see if you have more than one group of Contacts. See if you are showing all groups. Then go to settings > Contacts and see what your default group is. This is where the contacts are underway.

• Guest never appears in a 2602i access point

  Hello:

  Today, I converted an access point AIR-CAP2602I-A-K9 to stand-alone using the mode button/tftp, but any IOS Installer (I tried 2 other IOS and also tried to enter Rommon - I am able to change IOS because that the procedure I used is a not any command), I never get to see the prompt so that I can introduce commands to configure the AP. It's as if it hangs after initialization "successfully."

  The only thing I see all the time is the 'normal' console messages, and it displays no error message at all.  It happened before the downgrade.

  That's where stops the PA, but it is not really hung up because the console messages could keep appearing. He simply never gets the PROMT so I can enter a few commands. Not same acept would come.

  Cisco IOS software, software C2600 (AP3G2-K9W7-M), Version 15.2 (4) JA1, VERSION of the SOFTWARE (fc2)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2013 by Cisco Systems, Inc.
  Updated Wednesday, July 30, 13 23:12 by prod_rel_team

  Initialization of flashfs...

  flashfs [3]: 200 files, 7 folders
  flashfs [3]: 0 orphaned files, orphaned directories 0
  flashfs [3]: Total number of bytes: 31739904
  flashfs [3]: bytes used: 14286848
  flashfs [3]: available bytes: 17453056
  flashfs [3]: flashfs fsck took 9 seconds.
  flashfs [3]: initialization complete.
  flashfs [4]: 0 files, directories 1
  flashfs [4]: 0 orphaned files, orphaned directories 0
  flashfs [4]: Total number of bytes: 11999232
  flashfs [4]: used bytes: 1024
  flashfs [4]: available bytes: 11998208
  flashfs [4]: fsck flashfs took 0 seconds.
  flashfs [4]: initialization complete.
  Copy of the radio flash files: RAM:
  Current copy... CARTER
  Current copy... CCC
  Current copy... CCBC
  Current copy... CCBC
  Current copy... CC
  Decompression of files radio...
  .. initialization flashfs .done.

  Radio0 presents 8764 8000 0 A8000000 A8010000 0
  Rate table has 244 entries (IMS/104 BF 64 variants)

  Radio1 present 8764 8000 0 88000000 88010000 4
  This product contains cryptographic features and is under the United States
  States and local laws governing the import, export, transfer and
  use. Delivery of Cisco cryptographic products does not imply
  third party approval to import, export, distribute or use encryption.
  Importers, exporters, distributors and users are responsible for
  compliance with U.S. laws and local countries. By using this product you
  agree to comply with the regulations and laws in force. If you are unable
  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:
  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at
  [email protected] / * /.

  Cisco AIR-SAP2602I-A-K9 (PowerPC) Prozesseur (revision A0) 180214K / 81920K bytes of memory.
  Card processor ID FGL1716S0Q6
  PowerPC CPU at 800 Mhz, the revision number 0 x 2151
  Last reset of tension
  1 gigabit Ethernet interface
  2 802.11 radios

  32K bytes memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: BC:16:65:95:A7:C3
  Part number: 73-14588-02
  Kit numbered PCA: 800-37899-01
  Revision number of PCA: A0
  Serial number of PCB: FOC17151DSW
  Top Assembly part number: 800-38356-01
  Top of page the Assembly serial number: FGL1716S0Q6
  Top of page revision number: A0
  Product/model number: AIR-CAP2602I-A-K9

  Press RETURN to get started!

  * 00:00:11.819 Mar 1: % IFMGR-7-NO_IFINDEX_FILE: could not open the nvram: / ifIndex-table no such file or directory
  * 00:00:11.935 Mar 1: FIPS IOS Image Checksum successful test
  * 00:00:11.935 Mar 1: FIPS IOS test Crypto RNG DEK key to success
  * 00:00:11.939 Mar 1: FIPS IOS SHA-1 successfully test
  * 00:00:11.939 Mar 1: test of FIPS IOS HMAC-SHA1 successful
  * 00:00:11.939 Mar 1: test FIPS IOS CBC AES 128bits successful Encrypt
  * 00:00:11.939 Mar 1: test FIPS IOS CBC AES 128bits successful Decrypt
  * 00:00:11.939 Mar 1: test FIPS IOS IOS AES CMAC encrypt successful
  * 00:00:11.939 Mar 1: test of FIPS IOS IOS CCM encrypt successful
  * 00:00:11.939 Mar 1: test of FIPS IOS IOS CCM decipher successful
  * 00:00:11.939 Mar 1: test FIPS IOS successful RSA Signature generation
  * 00:00:11.939 Mar 1: FIPS IOS test with success the RSA Signature verification
  * 00:00:11.939 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed
  * 00:00:18.863 Mar 1: test RADIO FIPS AES 128-bit encrypt for TX on Dot11Radio successful 0
  * 00:00:18.863 Mar 1: test RADIO FIPS AES 128-bit CCM encrypt on Dot11Radio successful 0
  * 00:00:18.863 Mar 1: RADIO FIPS test AES 128-bit CCM decrypt on Dot11Radio successful 0
  * 00:00:18.863 Mar 1: test RADIO AMAC AES FIPS encrypted 128-bit CMAC on Dot11Radio successful 0
  * 00:00:18.863 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0
  * 00:00:24.991 Mar 1: test RADIO FIPS AES 128-bit encrypt for TX on Dot11Radio 1 successfully
  * 00:00:24.991 Mar 1: test RADIO FIPS AES 128-bit CCM encrypt Dot11Radio 1 successfully
  * 00:00:24.991 Mar 1: RADIO FIPS test AES 128-bit CCM decrypt on Dot11Radio 1 successfully
  * 00:00:24.991 Mar 1: test RADIO FIPS AMAC AES 128-bit CMAC encrypt Dot11Radio 1 successfully
  * 00:00:24.991 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on 1 Dot11Radio interface
  * 00:00:25.007 Mar 1: initializing dot11 onplus
  * 00:00:25.259 Mar 1: not pΘriphΘrique active autoconfig!
  * 00:00:27.039 Mar 1: % LINK-6-UPDOWN: Interface GigabitEthernet0, changed State to
  * 00:00:28.039 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, state change downstairs
  * 00:01:13.383 Mar 1: "Promiscuous" from Ethernet mode
  * 07:12:42.000 Apr 12: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
  * 07:12:42.000 Apr 12: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively
  * 12 Apr 07:12:42.003: % CDP_PD-4-POWER_OK: full power - supply line AC_ADAPTOR
  * 07:12:42.011 Apr 12: % SYS-5-RESTART: System restarted.
  Cisco IOS software, software C2600 (AP3G2-K9W7-M), Version 15.2 (4) JA1, VERSION of the SOFTWARE (fc2)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2013 by Cisco Systems, Inc.
  Updated Wednesday, July 30, 13 23:12 by prod_rel_team
  * 07:12:42.011 Apr 12: % SNMP-5-start COLD: SNMP agent on host ap knows a cold start
  * 07:12:42.991 Apr 12: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed State to
  * 07:12:42.999 Apr 12: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
  * 07:12:42.999 Apr 12: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
  * 12 Apr 07:12:44.651: % SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: crypto HW FIPS self-test passed
  * 07:12:44.651 Apr 12: ACCA complete initialization
  * 07:12:44.651 Apr 12: % SYS-3-HARIKARI: first level of ACCA INIT process routine is out
  * 07:12:44.971 Apr 12: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to<--- cursor="" stops="" here="" and="" won't="" accept="" enter="" or="" any="" other ="" keyboard="">

  Any thoughts?

  Best regards and thanks in advance

  Are you sure that you have turned off the flow control settings?

• We have no new free images (Adobe Stock subscription)

  Hello. We have a problem with the new free images in Adobe Stock. Apparently, we don't get new pictures. We have the small subscription with 10 photos per month. We bought a photo in August and now (September 19) we have just 4 pics left. In my opinion, we should have at least 19 pictures (10 pictures for September and 10 pictures for August 1 purchased). Can someone help me please?

  Hello

  The problem with your assignments has been resolved.  You should now see 43 licenses available.

  Thank you for your patience.

  Kind regards

  Bev

• Moving or sharing of credits to stock image adobe with other users

  I work for a company that uses creative cloud, so we have adobe several accounts to use both. We previously had an account with the Dollar Photo Club that was recently bought by Adobe. When the change that is going on, I was able to migrate our remaining credits, but given that I was already logged on my personal work adobe account, automatically transferred to this account without confirming. I wonder if there is a way to migrate our General adobe for all account credits us for access or if I have to share the credits of the image with other users?

  Hello

  I'm afraid that it is not possible to migrate the credits on a team account.

  You can use a library of creative clouds to collect/sharing of images, but you would need to allow the image to your team to use.

  See also:

  Common questions, Adobe Stock

  Adobe Creative Cloud libraries

  Thank you

  Bev

• My layers panel will never appear when I opened PS CS6

  Every time I open Photoshop CS6, say I open a PSD containing like 9 or more layers. Well when I open it, the layers do not appear. In this example, I created a new file and duplicated the bottom 10 times and still without layers show.

  Until I click on the tab layers:

  

  The main problem is that Okay, I could press F7 or go to the window and CHECK the layers of the workspace.

  The problem is that when I close PS (it does not crash, I do not force the end) and reopen it, I do the same thing, because the layers panel is never active and is not checked in the tab of the window of the menu. Whenever I open PS I need to check and open the tab layers. I tried to make my own workspace, switch to another one, look for general preferences, but I still have no change. It's like the PS never recorded this preference and you will notice that the same thing is happening in the settings/Styles Panel. I like these perfectionist tendencies, so I know that this is not the end of the world just click tab or press F7, everytime I open the program, but somehow it makes me crazy, he is not supposed to happen and that's enough for me.

  Thanks in advance!

  Have you tried to restore preferences in Photoshop?

  See Preferences in Photoshop and let us know if this helps.

  To backup your predefined actions, workspaces (if any ())

  Kind regards

  Assani

• Site visited Web never appears in the story

  The site is http://vk.com/zlodeyi. I have visited several times, but it is never added to the story. I have no problem with any other Web site, including other groups vk.com . The site is displayed correctly and is displayed in recently closed, but not in the history, no problems with it at the opera,

  There is a long procedure in the following article. I've never tried it myself: https://developer.mozilla.org/en-US/docs/Mozilla/Tech/Places/places.sqlite_Database_Troubleshooting#How_to_%28try_to%29_recover_from_a_corrupt_places.sqlite