10 seconds after the alarm recording

Similar Questions

• stop work after 30 seconds after the connection of 32-bit applications

  I have a problem that some of my 32-bit applications (vlc.exe, sapphireeffectbuilder.exe... etc) fail to start if I try after 30 seconds after the connection to windows. I managed to identify only a couple of processes that stop after 30 seconds of recording. These are:

  SearchProtocolHost.exe
  SearchFilterHost.exe
  IAStorIconLaunch.exe

  I'have tried to re-indexing and reinstall the intel RST service but no luck so far.

  I can see the vlc.exe in the system tray, but nothing of lance. Help, please. Thank you

  Hello

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 corrupt system files.

  3 virus.

  Try the steps listed here:

  Method 1:
  I suggest to start the computer using safe mode and check if the problem persists or not. If the issue happen not in Mode without failure, you can set up your computer in a clean boot and check if it helps.

  Step 1:
  Start the computer in Mode safe. At the start of the computer Mode safe with the minimum set of drivers and files.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:
  If the issue happen not in Mode safe, we will set up your computer in a clean boot state and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to virus scanner to make sure that the computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  (1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 3:
  If the problem persists, I would say allowing you to run the auditor of file system (CFS) analyze and check if it helps.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Mail crashes 2 seconds after the beginning

  Mail crashes 2 seconds after the beginning

  -Mac Book Pro retina

  -Captain El OS - X, last updated 7 June

  -Apple Mail, Update June 7

  The problem cannot be resolved. Restart of OX - X does not help.

  Try this:

  Exit the Mail.

  In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

  ~/Library/containers/com. Apple.mail

  Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

• Folio 1020 G1 keyboard works not for 30 seconds after the computer wakes from sleep

  I have several books of Folio 1020 G1 where the integrated keyboard does not work for about 30-60 seconds after the resumption of the operation of the standby mode. Everyone met this problem or a solution?

  The touch pad, touch screen and a usb keyboard immediately all work.

  They work on the load of the plant, but these machines were photographed with Windows Enterprise 8.1 x 64 using Configuration Manager 2012. The pack of drivers for this model of http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html, http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70362.exe is applied successfully during the imaging task sequence. I also miss the key features of the FN for brightness and microphone mute, but sp70321.exe (http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7343091 & swItemId = ob_144333_1 & swEnvOid = 415... does not solve this problem.

  This question has been somehow created by installing a software Synaptics 17.x version followed by the installtion of the 18.x software required above it. I don't know if this software was automatically installed from Windows builtin drivers or other drivers imported into Configuration Manager have been incorrectly applied, but running "rundll32.exe"% ProgramFiles%\Synaptics\SynTP\SynISDLL.dll",SilentUninstall_CallerWillReboot" in the sequence of tasks before apply the package stops sp71067.exe the problem didn't happen. "

• CQ5320F, 40 seconds after the start, circle beep 3 seconds pause, 5 seconds, does not monitor

  Mine is Compaq Presario CQ5320F desktop PC, Windows 7 64-bit, monitor showed no, 40 seconds after the computer starts, it starts making beep for 3 seconds, then pause 5 seconds, 3 seconds, then pause 5 seconds...

  Thank you.

  I unplug the Mobo RAM and reinsert the memory into the slot and turn on the computer, it has a different tone, so I decide to replace the motherboard first. I am now waiting for my order of Mobo will then publish.

  I replaced the motherboard, and there work now.

  banhien wrote:

  Hello

  Please visit the following link to determine the error and after return. In my view, must be something to do with the RAM, can you reinstall them (it) and try again?

  http://www.computerhope.com/beep.htm

  Kind regards

  BH

• Lenovo Z500 turns off a few seconds after the round. He started for the second time.

  Hello

  For several days my Lenovo Z500 is a strange problem. When I push the turn on button laptop starts up and shuts down after a few seconds when the windows logo appears. When I push again the button it starts fine with no problems.

  I have a Windows Professional 10, everything was ok for a while and now I don't know how to solve my problem.

  I'm going to enjoy all the ideas.

  I thought to reinstall Windows, but maybe you know the solution to fix it.

  P.S. I have the latest version of the BIOS installed.

  Kind regards

  Albert

  I think I solved the problem.

  Problem has been activated "quick start" in the power settings.

  To turn off the quick start, follow these instructions:

  1. Open the start screen
  2. type po drank directly on the start screen (power buttons short for). It will take you directly to the applet "change what the buttons to" in the search results.
  3. Click on the link "Change settings that are currently unavailable" to put at the disposal of the shutdown options.
  4. Uncheck the enable (active)-quick start .
  5. That's all. Now the quick start feature is disabled.

  Now everything works fine, z500 boots each time correctly with the first run.

  Thanks LenBlazer.

• Graphics & elements move after the site record!

  Muse by train before buying it but come back throughout a major problem.

  After the design of a page with images and elements, download and site successfully record, when I just run the Muse and the site again just on the page is in every sense.

  The screenshot below has the site on the right page and the fragmented Muse page on the left.

  

  I'll have to redraw the page whenever I load the site in the Muse.  Not good!  Have to think seriously about if to register after the trial period which is a shame, because in general, it does everything I want.

  Can someone suggest a solution to my problem?

  Tim

  I'm sorry Tim,.

  Please go to C:\Users\Username\AppData\Roaming-ici you will see com.adobe.AdobeMuseCC.2015.0 (2015 may differ if you use a different verson) rename com.adobe.AdobeMuseCC.2015.0 in com.adobe.AdobeMuseCC.2015.0.old

  * Note - Well that renaming the folder, make sure that Muse is closed. After you rename open muse-make the necessary changes, save and close the Muse. Try to open it again and see whether or not the changes reflect.

  Kind regards

  Nitin

• Thunderbird is suspended ("Not Responding") seconds after the opening (ver. 38.4.0). Likely related to Avast.

  After a recent update 38.4.0, Thunderbird does more completely. I have to kill the process, and then whenever I open Thunderbird thereafter, it crashes a few seconds (even 'unresponsive' freeze-up).

  Sometimes in SafeMode as well of TB and with disabled Avast. Thunderbird works normally for some time after a restart of Windows 7 before crashing again. So, start in Windows safe mode are not conclusive.

  Are there additional troubleshooting I can do? I am sunk now, as Thunderbird is watered seriously! Is it possible to revert to a previous version?

  Thunderbird has been relatively stable in recent weeks. Maybe the TB or Avast updates have solved the problems of gel. Thank you for the thoughtful troubleshooting.

• Thunderbird crashes a few seconds after the start, even when the reinstalled. Caused by Facebook Photo Uploader' (fbplugin) [@ CoreFoundation@0x9186]

  The basics: Mac OS X 10.10.1 Yosemite, 10 GB of RAM. Version of Thunderbird 31.3.0 (although the same thing happens when I try the previous and subsequent versions).

  Symptom: Thunderbird crashes after a few seconds of commissioning. I have enough time, click a menu or two, maybe watch a message, then it crashes.

  Attempts at solutions:

  -Departure of Thunderbird in Safe Mode.

  -From the Mac in Safe Mode.

  -Removed ~/Library/Preferences/org.mozilla.thunderbird.plist and ~/Library/Preferences/Thunderbird, removing the Thunderbird application, empty the trash and reinstall Thunderbird of mozilla.org.

  -With the help of Yosemite Cache Cleaner to scan the hard disk for viruses and deep - clean all user and system puts in cache.

  -Boot from the recovery partition, repair disk permissions and repair the file system.

  The only time that Thunderbird has more or less stable is just after I deleted all preferences, it starts, and I do the initial editing for my email account. Everything seems normal, and my list of IMAP folders. But shortly after that Thunderbird crashes again and hangs at each subsequent reboot.

  It is a problem that has developed in the last Wednesday, 24 Dec. before that the program worked very well. No other program on my computer at work doesn't show any symptoms. Thunderbird runs on my Mac at home (same versions of software) and on my Linux computer at work.

  I'm at a loss what to try next. Any ideas?

  Please visit https://bugzilla.mozilla.org/show_bug.cgi?id=548197#c5

• New App crashed a few seconds after the opening

  Out of nowhere the application of new collisions a farm just after opening.  I see that the verification of updates for a second and it crashes.  It looks closed, but the first screen is there in the background, but if I click on it it just hangs.  I closed the app running in the background, but it did not help. I have ios 9.3.2 - any help is appreciated.  I've seen others on the web with this problem but no resolution.

  I noticed this a few days ago. It worked just itself, so I'll try a little later. Historically, it crashes on the stage of 'Check updates', I think it is probably a server Apple problem.

• Firefox is no longer in the first 5 seconds after the launch plan

  I am running Win7 with all the latest updates and Firefox 13.0.1. After I run Firefox, a few seconds later (it varies), the Firefox window is no longer in the foreground. It's as if I clicked on another window or wall-paper, and the Firefox window is no longer selected. It becomes embarrassing when I launch Firefox, click a bookmark to blog and try to scroll down with my mouse wheel. All of a sudden, it stops scrolling because the window is no longer in the first plan/selected, and I have to click on the Firefox window back to the foreground. Note that if I open other windows, the Firefox window always remains above these windows. But the window of Firefox itself is not the selected object.

  I finally found the plugin that asks that question for me. The plug-in, I confirmed my system is 'Shockwave Flash 11.3.300.268', which is the most recent available now. Deactivating a plugin solves the problem for me. I hope an update of Adobe will respond to that.

• Firefox crashes 2 seconds after the start. This happened after repair upgrade to Windows 7

  After repair, update Firefox (9.0) will not work. I finally uninstalled and reinstalled without success. Following your directions of support I tried to delete my profile with partial success with a new Firefox profile would be run once and then back to an apparent after 2 seconds accident (as seen in Task Manager). After each new profile he followed the same routine of work once. Any help would be appreciated.

  Try a "clean reinstall" Firefox by removing the Mozilla Firefox installation directory before you reinstall, as explained in these articles:

  • Troubleshoot and diagnose problems of Firefox - see "Reinstall Firefox" here.
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall (De MozillaZine KB article is currently unavailable)

  If Firefox still crashes after a clean reinstall, try the suggestions in the article Firefox crashes - help out, prevent and get help fixing accidents here and, if possible, after a crash report ID, as explained later in this article.

• Satellite A100 PSAA2 - HDD counters every 30 seconds after the BIOS update

  Hello

  I recently renewed my BIOS to 2.20 to 2.30 on a Toshiba A100 PSAA2, after that my disc HARD spindows every 30 seconds when not in service, the shortenes course, that's life. I tried, clean XP SP3 and other Toshiba utils, programs like drive HARD silencer, Ubuntu, now I'm working on Win 7 RC, the problem remains, even when I select No to turn off the hard disk in the Windows settings.

  I think that Toshiba set the counters of setting in the BIOS to shorten the life of HARD drive... How downgrade the BIOS to 2.20 v., this watch WinPhlash I have an older BIOS and could not crush him.

  Can someone help me?

  Have you tried to reset the BIOS to its default settings?

  Only an ASP (Authorized Service Partner) may downgrade a BIOS. There is a list of the ASP on the Toshiba site.

• Contrast and color change 10 seconds after the restart.

  Hi, I have a problem with my laptop Toshiba Satellite L300D, and every time that I reboot, and when restarting over my screen is all nice and dark and strong colors. After 10 seconds, he jumps and gets very bright.

  If it is too difficult to understand what is happening, that person has the same problem on different system model.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=191911

  I tried the FN keys do not help, it does not contrast of brightness.

  It's high-contrast / Bright and it kills my eyes. Thank you.

  Hello

  You can try the following:

  1. download and install a display driver of [European Toshiba driver Page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] before installing, remove previous installed a
  2 update utlity vap (if you use xp, it is called common module, I guess)
  3 reinstall the operating system

• stop iPhoto 5 seconds after the opening

  Please can I have some suggestions as to why my iphoto is closed after 5 seconds of opening? The following information appears on the screen.

  I sent the report with Apple for the 4 weeks that this has happened. I have my photos supported

  What version of iPhoto and the operating system?

  If she is v9 and OS X 10.8.5 then:

  A lot of older versions of iPhoto 11 this meet right now:

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  If it's a different version then, what version of iPhoto and the operating system?