I got database 11g which we take the backup to cold on Wednesday and Saturday of each week and an OEM12c agent configured on the server. I get OEM alerts during scheduled interruption db.
I can find no blinds command-line utility to block the alert during the hour and day.
Is there a bluetooth for Toshiba Bluetooth Stack command line utility, which can be used to discover bluetooth devices? Our application needs such a command line utility to enable the detection of using Toshiba Bluetooth Stack bluetooth device.
We looked at a few line utilities Bluetooth command line tools, which all work fine with Microsoft Bluetooth Stack and control including BluetoothView. However, they did not work with Toshiba Bluetooth Stack.
We would be very grateful if someone could share experiences or throw us some lights on it.
Thanks in advance Ray
Hello
Try to remove the Toshiba Bluetooth stack and to replace by the Microsoft Bluetooth Stack. Found an interesting document that explains how to: http://download.Parrot.com/HTML_Update_Procedure/Replacing_Toshiba_BT_Stack_by_the_Microsoft_BT_Sta ck_EN.pdf
Then you could try to use the mentioned tools that work with Microsoft Bluetooth Stack
I created the partition by using the utiliy of command-line partedUtil on ESXI in the face of error below:
error: "Invalid guid (0xfb). Contains non hexadecimal numbers
Is not a valid guid (fb). Length should be 32
Is not a valid guid (251). Length should be 32
Can you advise me how to solve the problem of the partition.
Hi Prashant.
VMFS data warehouses can be created and deleted using the vSphere client connected to an ESXi/ESX host or vCenter Server. It is not necessary to manually create partitions by using the command line utility. For more information, see the Configuration Guide for your version of ESXi/ESX storage management.
Resolution
You can use the partedUtil command line utility to directly manipulate local and remote tables of partitions on the disks of SAN on ESX and ESXi.
The partedUtil command-line is only supported for ESXi 5.x disk partitioning. The command-line utility fdisk does not work with LUN formatted with VMFS5.
Note: This article is from the principle that a console session is available to the host ESX or ESXi, you're familiar with console management concepts and the disk, and you did backups appropriate before proceeding. For more information, see:
Unable to connect to a host ESX using Secure Shell (SSH) (1003807) or
Using the Mode of Support Tech in ESXi 4.1 and 5.x ESXi (1017910).
If you are not sure of any step, contact the VMware Support.
For more information on the re-creation of a missing VMFS partition table using PartedUtil see: re-creating a VMFS datastore partition missing in vSphere 5 (2046610)
Today, I try to open a cd tray in different methods. I open more than 4 ways successfully. But I don't know how to open a drawer of CD using command-line in windows 7? Can anyone help to success on the fifth plea.
Any help will be greatly appreciated.
Hello world
Today, I try to open a cd tray in different methods. I open more than 4 ways successfully. But I don't know how to open a drawer of CD using command-line in windows 7? Can anyone help to success on the fifth plea.
Any help will be greatly appreciated.
Hello
There is no command to operate the drawer in the Windows command prompt.
You can add a small command-line utility called Nircmd.exe that will allow you to do this, and more to use many cool commands more.
As mentioned, the API is another way too but who can take over installation but doable.
Thanos also gave some options you could look.
If the information provided to the clarity/confirmation that you are looking for be sure to close the thread for the other members of the community may be able to find the solution at the appropriate time in the future.
I use the Hyperion 11.1.2.2 planning version. I am trying to execute a business rule defined via the calc Manager command line utility. Please see the order form below,
At the launch of the above command, the utility starts and ends without triggering the rule in the database. See log info below,
Local planning: en_US
using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64
EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) has the value of the property 'EPM_ORACLE_HOME' of the JVM.
using the property of Java for Hyperion home D:\Oracle\Middleware\EPMSystem11R1
For the non - RFP app, ask size is not necessary
EPM_ORACLE_INSTANCE (D:\oracle\Middleware\user_projects\epmsystem1) has the value of the [EPM_ORACLE_INSTANCE] property of the JVM.
Support RTC Essbase Version: 0xb1221
null
But if I try to execute a business rule with the calc Manager command-line utility, it works well. It is only rules base which poses problem. Please note that this set of rules is to have business rules that belong to a database that is Capex.
Any help on this request would be much appreciated. Please notify.
Thank you
AP
Please ignore this request,
I found the KB article below
Hyperion Planning Rulesets cannot be launched using the CalcMgrCmdLineLauncher planning (Doc ID 1453630.1)
New in 11 versions is a copy request utility that takes the input from the command line. This utility allows scheduling copy operations using third party, planning of utilities such as the built in Windows Scheduler. The HFM copy App Command Line Utility in releases of the + 11.1.2 lies in EPM_ORACLE_HOME\Products\ FinancialManagement \Utilities and for all the previous versions of + 11.1.1, the location is % Hyperion_Home%\FinancialManagement\Server. The utility is named HfmCopyAppCmd.exe or HfmCopyAppCmd_x64.exe.
The command line utility has the same options that the utility based GUI with the exception being that there is no progress window to watch tasks participated and no option to retry a failed task. In order to run the command line utility, the computer that runs the utility must have installed the Package redistributable Microsoft Visual C++ 2005 SP1. This package is installed by the installer of version 11 EMP, so it doesn't have to be installed manually when executing an HFM application server, but it may be necessary to install the copy utility is run on a server database directly.
I tried lauching business rule by using the command line utility CalcMgrCmdLineLauncher.cmd. The syntax I used is \Planning\planning1 > CalcMgrCmdLineLauncher.cmd A:Samp U:admin D:PL /R:AGGR F:Agg.xml. I get the following error when executing the command-
FATAL error: Cannot run getRTPs(). Cannot find the rule AGGR deployed in the type of plan PL in the repository com hyperion.calcmgr.common.CalcMgrODLLogger logServereMsg
I selected the correct application of planning in the locations tab and assigned administrator privileges on the tab of the business rule access privileges. I followed all the instructions in the link - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/frameset.htm?ch06s09s05.html to run BR by command line.
Please let me know the reason for this error...
No, you can use the CmdLnLauncher utility located in the installation of Regional service directory, it will be under eas\console\bin
Is it possible to install and remove security HBR via command line? There is a command line utility to launch HBRs, is there a similar way to update security programmatically, rather than manually change.
Unfortunately, you cannot set security on the command line, in V11, you use LCM to export/import business rules that contain implementation service but this one is a complete rule and it is not so smart to crash if the rule already exists. If you're on V11 and the help of calc Manager you can use a utility to import safety.
Is there a bluetooth utility available at the command line, which would allow something as "bluetooth " to send a file that is specific to a specific phone?
Thank you!
I'm afraid I can't tell you whether or not such a tool exists. At least for Windows. For Linux / Unix, I know it's possible, but this is why I am not an expert in this.
But why would you do? The only thing that comes to mind would be self selbsttötung tasks.
About 14 days ago I received an error message at startup 'command line compiler Visual c# has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "I click on 'Close' and after a few more screens (same message), the laptop is now running.
I studied this during two weeks at three sites including two Microsoft sites. No one has an answer. However, when I searched Microsoft technical support I have referred me to the Sony because of the OEM license. So, I find myself in this forum.
I found according to my research it is a file associated with this - csc.exe. I don't know if it is the cause or not. From research it is a component in C++ and associated with .NET. When I stop I get another error "the application could not initialize properly (0xc0000142). Click OK to close the application. »
I have tried to use sfc but only get to 96% and received the message "Windows Resource Protection found violations of integrity." BTW, I'm under sfc since a high cmd prompt. I also ran check and looked at the newspapers. Because the paper is too large, but neither the newspaper for analysis or check all the items close to what I feel, I am enclosing details of the sfc.
I have Norton 360 with virus update subscriptions and also ran CCleaner and SpyBot (I do it each month).
I don't know what to do. I'm not a programmer and most of the Visual c# sites are for programmers, and told me that if my post is specific, in writing, or debug code, I need to ask for help from someone else.
I also did the clean boot, add services, and startups. I can't find the program or the offending service. I am at a loss. I need help. Any ideas or suggestions are appreciated.
Thank you
Hello Legman, Thank you for your message It is quite possible that you may encounter a hardware problem if you have a C drive recovery and that you always encounter the error. Try to run the hidden partition hardware diagnostic software.
to access the partition hidden startup cold. Spam [F10] several times from the VAIO logo Press ENTER to "Edit boot options". Once the recovery tools launch hardware diagnostics select.
have a large directory of .gz files to decompress. utility WinZip does not allow a selection in bulk / decomperssion. same result by using the unzip command line have tried the gunzip command, but not recognized by the system.
any help approeciated.
There is a program of "gunzip.exe" command line included in the package of the free Unix utility found here:
I have a large amount of support .png files that have been placed on my C:\ drive, by some malicious programs or the system. Whatever it is, I want to remove them because they take a disproportionate amount of space (about 25 GB to an indicative value). They are in a sub-sub-sub etc directory and appear to be copies of random images as advertisements for computers, cars, soccer players and goodness knows what else, since every time I try to see, explore stops at halfway through, due to the large amount of files.
So my question is: is there a way to delete these files without the help of Windows Explorer, for example by using a command line? or is there another utility of file management that I could use?
I would appreciate help on this.
Start > type CMD
Right click on CMD and select run as administrator
You type the command DEl as written in the link I mentioned earlier. Just make sure that you type the location of the file and names as you see them on your system.
This is another article about the MS BACK Del command
Anyone is able to change the values of the ASP for the command line (or groovy), I want to change a large number of selected agents.
A previous post talks about using asp: together, but looking at the option of the command cmd - fglcmd.sh there isn't like asp: together.
Another option that I have that is not perfect because it will take a manual step, is if I could define tags agent from the command line and then change groups, everyone does it?
See you soon
Andy
example of another post - /opt/foglight/*_FMS/bin/fglcmd.sh - fog usr - pwd fog cmd - asp: together - agentId - configName SQL2005 - keyName InstanceName-value
./fglcmd.sh - usr pwd - xx xx - cmd commands
Agent:
activate active agent.
clients display a list of known clients.
clientupgrade upgrades a remote clients.
Create creates an instance of an agent.
Disable disables an agent.
Delete Deletes an agent.
deploy deploys an agent.
GetLog retrieves a specific agent to log file.
list displays a list of known agents.
newspaper displays a list of agent log files.
Packages displays a list of packages available agent.
SetSchedule assigns a blackout schedule to an officer Foglight.
showschedule displays a list of schedules of blackout attributed to agents.
Start starts an agent.
Stop stops an agent.
types displays a list of the agents known by the name of the agent host.
cartridge:
Disable disables a Foglight cartridge installed.
enable activates a Foglight cartridge installed.
Install install and activate a Foglight cartridge (on by default).
list of all installed Foglight cartridges.
uninstall Uninstalls a Foglight cartridge.
License:
import installs a license.
list displays a list of installed licenses.
Remove Removes a license.
Migration:
agent to migrate a 4 Foglight agent instance.
cancel the task migration Cancel that are planned or underway.
createhostalias create a host alias 5 foglight for a host Foglight 4.
data migrate the data collected for an agent instance Foglight 4.
DCM migrate a DCM Foglight 4.
items in the list all elements of a given Foglight 4 server migration or all servers registered Foglight 4.
listhostalias list all alias host 5 foglight Foglight 4 guests.
Get status and migration of the newspapers associated with an element of migration log.
Refresh refresh a Server 4 Foglight recorded to reflect changes on the server.
Grid Server 4 Foglight for migration.
removehostalias remove a host alias 5 foglight for a host Foglight 4.
unregister Unregister a Server 4 Foglight recorded (already migrated items will not be affected).
Schedule:
list displays a list of all the annexes Foglight.
script:
Run executes a script.
Security:
assigngroup assign a user to a group.
assignrole assign a group to a role.
CreateGroup Create a group.
CreateUser to create a user.
DeleteGroup remove a group.
DeleteUser removes a user.
exportldapcfg LDAP integration in the export settings.
integration of LDAP Import importldapcfg settings.
list security artifacts.
support:
Bundle creates a support group.
ClientBundle creates and get a bundle of a client to delete support.
topology:
blackoutobject assigns a calendar of blackout to topology or objects.
electricity lists all assigned to objects of topology power cuts.
util:
ConfigExport exports Foglight monitoring policy.
ConfigImport matter a Foglight political control.
display approx. Foglight Server configurations
metricexport exports metric observations by request.
UIList displays a list of the deployed modules of WCF.
I found an environment to test this script in.
I discovered that there was a mismatch between the ' / monitoredHost/name "used by the agent of systeme_windows and the virtual 'name' machine, which this script assumes must match.
After you make this change, the script worked are expected. Note that not all the virtual machines in my test environment had a "dnsName" (where the ""? "to protect themselves against the null value"), if this method can not be infallible.
Hello I reformatted my laptop toshiba Satellite A100 PSAA8C SK800C today and I was expecting to download all the drivers and install them. However, when I download the 'power saver' among the official website of toshiba, I was not able to install.Not
It happened that I moved a clip with the Finder, witch used in a project. First of all, it took me time to find a dud. Finally I got it. But it's just that the first part of a show. Now I should plug it in again. What do I do that? I don't see this o
Problem: I can't get my laptop to start (it blinks just 3 times battery icon, without to need laptop power (won't start even fan)) unless I disconnect CMOS battery, external battery and power first. Disconnected battery and CMOS battery, I can get th
Hello! I program who receive channels of the ports series, split into 2 separate strings and write in separate tables. Everything is fine, but sometimes Scan string for chips generates strange values. For example: if I send strings like this: 23.14 6
It's the Xperia Z3 + that I've owned for 4 months. When the headset is plugged in the sound will play through them but if the headphone is moved or rotated when in the phone then the sound stops playing on the helmet and plays on the speakers of phon