2960S battery, SE3 15.0 (2) & GANYMEDE

Similar Questions

• no login to 3750G after upgrade to 15, 0 - 2.SE3

  I just did a test upgade to a unit of 15, 0-2SE2 to 15.0.2 - SE3 after that reload Ganymede no longer works and the console, remote ssh, telnet access no longer works.  I get console access if it starts the switch without having an uplink.

  TAC newspapers showing the upgrade.

  Fri Jun 14 07:06:33 2013 10.100.0.125 tgreaser 10.3.9.31 tty1 stop task_id = 104 timezone = service EDT = start_time = 1371207993 priv-lvl = 15 = cmd shell archive download-sw / overwrite/allow-feature-upgrade tftp://thorin/c3750-ipservicesk9-tar.150-2.SE3.tar
  Fri Jun 14 07:29:20 2013 10.100.0.125 tgreaser 10.3.9.31 tty1 stop task_id = 105 timezone = service EDT = start_time = 1371209360 priv-lvl = 15 = cmd shell write memory
  Fri Jun 14 07:29:22-2013 10.100.0.125 tgreaser 10.3.9.31 tty1 stop task_id = 106 timezone = service EDT = start_time = 1371209362 priv-lvl = 15 = reload cmd shell

  Debugging records now showing me trying ot login to the console / ssh / telnet after I've brought up the switch and went up to enable

  June 14 08:34:27 10.100.0.125 30: 00:06:33: MORE: Queuing AAA accounting request 12 treatment

  June 14 08:34:27 10.100.0.125 31: 00:06:33: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:34:27 10.100.0.125 32: 00:06:33: MORE: treatment of the accounting application id 12
  June 14 08:34:27 10.100.0.125 33: 00:06:33: MORE: sending AV task_id = 4
  June 14 08:34:27 10.100.0.125 34: 00:06:33: MORE: sending AV timezone = IS
  June 14 08:34:27 10.100.0.125 35: 00:06:33: MORE: AV = shell shipping service
  June 14 08:34:27 10.100.0.125 36: 00:06:33: MORE: sending AV priv-lvl = 15
  June 14 08:34:27 10.100.0.125 37: 00:06:33: MORE: send cmd =-exec debugging Ganymede AV
  June 14 08:34:27 10.100.0.125 38: 00:06:33: MORE: request for accounts created for 12()
  June 14 08:34:27 10.100.0.125 39: 00:06:33: MORE: using the 10.100.0.75 Server
  June 14 08:34:27 10.100.0.125 40: 00:06:33: MORE (0000000C) / 0/IDLE/B64918: started 5 sec timeout
  June 14 08:34:27 10.100.0.125 41: 00:06:33: MORE (0000000C) / 0/IDLE/B64918: got immediately connect on new 0
  June 14 08:34:27 10.100.0.125 42: 00:06:33: MORE (0000000C) / 0/WRITING/B64918: started 5 sec timeout
  June 14 08:34:27 10.100.0.125 43: 00:06:33: MORE (0000000C) / 0/WRITING: write to 10.100.0.75 failed with errno 257 ((ENOTCONN))
  June 14 08:34:27 10.100.0.125 44: 00:06:33: MORE: sending AV task_id = 4
  June 14 08:34:27 10.100.0.125 45: 00:06:33: MORE: sending AV timezone = IS
  June 14 08:34:27 10.100.0.125 46: 00:06:33: MORE: AV = shell shipping service
  June 14 08:34:27 10.100.0.125 47: 00:06:33: MORE: sending AV priv-lvl = 15
  June 14 08:34:27 10.100.0.125 48: 00:06:33: MORE: send cmd =-exec debugging Ganymede AV
  June 14 08:34:27 10.100.0.125 49: 00:06:33: MORE: request for accounts created for 12()
  June 14 08:34:27 10.100.0.125 50: 00:06:33: MORE: treatment of the accounting application id 12
  June 14 08:34:27 10.100.0.125 51: 00:06:33: MORE: sending AV task_id = 38
  June 14 08:34:27 10.100.0.125 52: 00:06:33: MORE: sending AV timezone = IS
  June 14 08:34:27 10.100.0.125 53: 00:06:33: MORE: AV = shell shipping service
  June 14 08:34:27 10.100.0.125 54: 00:06:33: MORE: sending AV priv-lvl = 15
  June 14 08:34:27 10.100.0.125 55: 00:06:33: MORE: send cmd = debug Ganymede AV
  June 14 08:34:27 10.100.0.125 56: 00:06:33: MORE: request for accounts created for 12()
  June 14 08:34:27 10.100.0.125 57: 00:06:33: MORE: using the 10.100.0.75 Server
  June 14 08:34:27 10.100.0.125 58: 00:06:33: MORE (0000000C) / IDLE/1/C2B3F0: started 5 sec timeout
  June 14 08:34:27 10.100.0.125 59: 00:06:33: MORE (0000000C) / IDLE/1/C2B3F0: got immediately connect on 1 new
  June 14 08:34:27 10.100.0.125 60: 00:06:33: MORE (0000000C) / WRITING/1/C2B3F0: started 5 sec timeout
  June 14 08:34:27 10.100.0.125 61: 00:06:33: MORE (0000000C) / 1/WRITING: write to 10.100.0.75 failed with errno 257 ((ENOTCONN))
  June 14 08:34:27 10.100.0.125 62: 00:06:33: MORE: sending AV task_id = 38
  June 14 08:34:27 10.100.0.125 63: 00:06:33: MORE: sending AV timezone = IS
  June 14 08:34:27 10.100.0.125 64: 00:06:33: MORE: AV = shell shipping service
  June 14 08:34:27 10.100.0.125 65: 00:06:33: MORE: sending AV priv-lvl = 15
  June 14 08:34:27 10.100.0.125 66: 00:06:33: MORE: send cmd = debug Ganymede AV
  June 14 08:34:28 10.100.0.125 67: 00:06:33: MORE: request for accounts created for 12()
  June 14 08:34:53 10.100.0.125 68: 00:06:58: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:34:53 10.100.0.125 69: 00:06:58: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:34:59 10.100.0.125 70: 00:07:04: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:35:31 10.100.0.125 71: * 14 Jun 08:35: % SYS-6-CLOCKUPDATE: system clock has been updated from 19:00:37 GMT Sunday, February 28, 1993 at 08:35:00 EDT Friday 14 June 2013, configured from console by console.
  June 14 08:35:32 10.100.0.125 72: 00:07:37: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:35:32 10.100.0.125 73: 00:07:37: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:35:35 10.100.0.125 74: 00:07:39: MORE: Queuing AAA accounting request 12 treatment

  June 14 08:35:50 10.100.0.125 76: 00:07:55: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:35:53 10.100.0.125 77: 00:07:58: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:35:53 10.100.0.125 78: 00:07:58: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:35:58 10.100.0.125 79: 00:08:02: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:35:58 10.100.0.125 80: 00:08:02: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:36 10.100.0.125 81: 00:08:05: MORE: Queuing AAA accounting request 12 treatment
  June 14 08:36 10.100.0.125 82: 00:08:05: MORE: Queuing AAA accounting request 12 treatment

  can test the unit fine on different subnets.   No ACLs do block... I can even see my ssh - ing host vty LCD counter him

  I'm NOT under ACS or ISE... an older worm running compiled code.

  / usr/sbin/tac_plus - v
  tac_plus version 4.4rc2 - 3 (Extended Tac_plus)
  CONST_SYSERRLIST
  FIONBIO
  LINUX
  LITTLE_ENDIAN
  LOG_LOCAL6
  NO_PWAGE
  REAPCHILD
  REARMSIGNAL
  SHADOW_PASSWORDS
  SIGTSTP
  SIGTTIN
  SIGTTOU
  SO_REUSEADDR
  TAC_PLUS_PORT
  VOIDSIG
  __STDC__

  Does anyone else have this problem?  Anyone know a fix than ive seen a few posts over the years, but never seen a fix. (Im having the same problem with Ganymede on 3750e universal 15.0.2SE3)

  In addition to discussions about the bug, CSCug62154, can be found here.

• 4506E Core and 2960S access IP Camera System switches

  Hi all

  I implement my first Cisco network and needed a little guidance. Here's the scenario and I wish that it works:

  • 2960S access switches will have cameras IP PoE and POS stations connected to them with the core fiber uplinks.
  • 4506E central office switch will have all the switches connected to the fiber SFP uplink ports access. All fiber optic cables are single mode with LC connectors.
  • All the cameras IP PoE and the other the camera server NETWORK card will be the 172.16.0.0/16 network and in case of default Vlan 1.
  • All computers of end users and a NETWORK card in the camera server will be on the 192.168.1.0/16 network and Vlan 2. 2 VLAN is needed as the main switch.
  • All stations of POS and stand-alone server POS will be on 192.168.20.0/16 and Vlan 3 switch network access and the base.
  • It will be a completely closed network, no internet access.
  • Computers end users will access video server with raids unicast.
  • All switches interconnect fiber SFP transceivers of 1 GB.
  • VLANs are not to communicate with eachother, just need to Vlan 1 and 3, be passed on to the switch base. It will be setting ports in the trunk switchport mode correct?
  • I gave all the devices static IP networks, with the exception of IP cameras that will get the IP Address of the DHCP server.
  • When I plug in a device of watt PoE 15.4, is the port set to auto detects by default so it lights camera or manually activate PoE on the port?

  -I have to run DHCP on central switch, only on the default Vlan 1 172.16.0.0/16 network so my IP cameras can obtain an IP address.

  IP dhcp pool cameras

  network 172.16.0.0 255.255.0.0

  default router 172.16.0.1

  -On the PoE IP camera and POS station ports I think following configuration:

  switchport mode access

  spanning tree portfast

  I would like to know what you think. I have a few weeks before they must go to the production. Any help and advice will be greatly appreciated!

  I will be checking periodically the thread and display updates.

  Yes I see!

  So with each carpet use "port 1' for each channel.

  for example

  If we have a stack, there that a single etherchannel, should therefore be port-channel 1 (the first 6). This could bind to the 4500 to Portchannel 1

  When we have the second battery, it will also be an etherchannel, which is the port-channel 1 (the first 6).

  This could bind to the 4500 on Portchannel 2

  and so on... The port-channel number is locally meaningful only so you don't meet for loops if its configured as suggested, etc...

  This way you can keep it simple and you will have ease of management in this way.

  No, there is no point linking medical examinations to configure

  Hope it makes sense.

  Please evaluate the useful messages, & mark as answer questions thank you.

• 2960 x reload command problem

  Hey Cisco,

  I think that I'm not the only one facing this issue when run command reload

  I tested x 2960 as version below

  2015-12 - 18_171716.jpg

  

  normal run charging for Member or another switch of type charging slot 2, it works very well by charging slo type 2

  2015-12 - 18_174901.jpg

  

  When I switch to reload CSL 2, typo invites me error, but seeking to confirm it; In this kind of situation, I just press on enter because I guess I type correctly

  2015-12 - 18_174616.jpg

  

  Surprise, it reload the entire stack switch

  so I test it with the version recommend

  2015-12 - 18_175154.jpg

  

  same question comes, it recharges battery set switch

  2015-12 - 18_175255.jpg

  

  If typo recharge slotx 2, it always reload the entire stack

  2015-12 - 18_184246.jpg

  

  Please consider this question

  Hi Vui,

  The behavior you are observing should because you do not use the correct syntax in order to recharge the required slot.

  The correct command is as follows, please note the keyword exact "slot:

  SWA#reload slot 2

  By typing "charge CSL 2", you say the battery to recharge all members for the reason "CSL 2" which is used management and logging. Please see the following link for more details about this command: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/stack_manager/command_reference/b_stck_152ex_2960-x_cr/b_stck_152ex_2960-x_cr_chapter_01.html#wp3486313748

• 2 GB Cisco EtherChannel Cisco 3750 x 2960S

  Hello

  Im trying to configure an EtherChannel between my stack of 3750 and my stack of 2960S.

  I have 2 3750 x in the form of battery. (2 switches).

  I have 4 2960 s in the form of battery. (4 switches).

  I need to create a channel of 2 GB between them. My heart is the 3750 and my stack of 4 2960 s is on another floor, so I want to create a channel of 2 GB between them.

  I know that you can create a PO between them, but what I want to do is to create a channel of 2 GB between them that run at the same time, active on both ports of 1 GB.

  Is this possible and how? This is my current setup until now:

  Change the battery 3750

  Interface Port-channel10
  Description ETHSW04 - 1.5
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  spanning tree cost 15

  Interface Port-channel11
  Description of uplink BRP at ETHSW04 - 1.5
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  spanning tree cost 1

  interface GigabitEthernet1/0/39
  Description ETHSW04 uplink - 1.5
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  channel-protocol lacp
  active in mode channel-group 10

  interface GigabitEthernet1/0/40
  Description ETHSW04 uplink - 1.5
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  channel-protocol lacp
  active in mode channel-group 10

  interface GigabitEthernet2/0/39
  Description Uplink of BRP - uplink ETHSW04 - 1.5
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  channel-protocol lacp
  active in mode channel-Group 11

  interface GigabitEthernet2/0/40
  Description Uplink of BRP - uplink ETHSW04 - 1.5
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  channel-protocol lacp
  active in mode channel-Group 11

  ---------------------------------------------------------------------------------

  Battery 2960 s

  Interface Port - Channel 1
  Description CORE01 uplink
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  spanning tree cost 15

  Interface Port-canal2
  Uplink BRP to CORE02 description
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  spanning tree cost 1

  interface GigabitEthernet1/0/47
  Description CORE1-G1/0/39
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  channel-protocol lacp
  active in mode channel-group 1

  interface GigabitEthernet1/0/48
  Description CORE1-G1/0/40
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  loop of spanning tree guard
  channel-protocol lacp
  active in mode channel-group 1

  interface GigabitEthernet4/0/47
  BRP-CORE2-G2/0/39 description
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  spanning tree portfast
  loop of spanning tree guard
  channel-protocol lacp
  active in mode channel-group 2
  !
  interface GigabitEthernet4/0/48
  BRP-CORE2-G2/0/40 description
  switchport trunk allowed vlan 1,210,220,214,216,220,306,406
  switchport mode trunk
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  spanning tree portfast
  loop of spanning tree guard
  channel-protocol lacp
  active in mode channel-group 2

  Thank you...

  Not possible AFAIK.
  LACP will provide examples of the use of load balancing and redundancy that is good enough for most.
  Other then that you would have to watch the 10GB uplinks between switches for more bandwidth.

• Error message, unbalanced power supplies, battery switch, cisco 3750 x

  Hello

  A new Member switch has been added. There seems to be a power supply problem as alerted in the newspapers of the switch, as shown.

  Journal:

  % PLATFORM_STACKPOWER-4-UNBALANCED_PS: electric battery switch 3A unbalanced power supplies

  When I watched this show, research has pointed out this bug; CSCtg20513. The bug suggested orders, below;

  You can enable or disable ports (stop/no closed) battery on the unit which incorrectly reports this error.
  config t
  battery-switch
  Standalone
  no autonomous

  However, these commands have been ineffective.

  See the Version

  Version 12.2 (55) SE3,.

  Any other suggestions to help, is very much appreciated!

  Thank you

  JoBee

  That fix is an earlier version, SE2, SE3 is not down like 1 of the service version that is why he can not work

  12.2 (55) SE3 is almost to the State deferred as well as I would upgrade to a more recent image which now has 4 years of

  Have you tried to manually reposition the power stacks

• GANYMEDE + Queueing AAA authentication

  Hello

  I've recently updated the IOS on my 3560 X 15.0 (2) SE3 and I can't get GANYMEDE works correctly. It worked properly on this device until I updated the IOS so I don't know what happened. I've made a few other changes as well (management IP change and clean the other config) so I'm not 100% sure what the issue was with the IOS. I have this same exact config on several other Cisco devices and it works fine. Any thoughts are appreciated.

  Config:

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  Ganymede IP source interface Vlan1

  radius-server host

  Ganymede IP source interface Vlan1
  GANYMEDE-server host 10.x.x.x key *.

  Debugs:

  MORE: Queuing request authentication AAA 88 for the treatment

  I never spent queuing. I can't find a way to clear the queue either.

  I have to disable the uplink port and reboot the switch to not even enter the port of the console. At this point, I get 1 authentication attempt (debugging below) before entering the queue messages.

  21:34:36.864 Mar 29 CDT: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed State to

  21:40:48.068 Mar 29 CDT: MORE: Queuing AAA request authentication 47 for the treatment

  21:40:48.068 Mar 29 CDT: HIGHER: processing id authentication of demand beginning 47

  21:40:48.068 Mar 29 CDT: MORE: authentication start package created for 47(**USERNAME**)

  21:40:48.068 Mar 29 CDT: MORE: using the 10.x.x.x server

  21:40:48.068 Mar 29 CDT: HIGHER (0000002F) / 0/IDLE/68F4CBC: started 5 sec timeout

  21:40:48.077 Mar 29 CDT: HIGHER (0000002F) / 0/IDLE/68F4CBC: got immediately connect on the new 0

  21:40:48.077 Mar 29 CDT: HIGHER (0000002F) / 68F4CBC/WRITING/0: started 5 sec timeout

  21:40:48.077 Mar 29 CDT: T +: 192 (0xC0) Version, type 1, seq 1, encryption 1, SC 0

  21:40:48.077 Mar 29 CDT: T +: session_id 912650955 (0x3665F2CB), dlen 32 (0x20)

  21:40:48.077 Mar 29 CDT: T +: type: AUTHENTIC / START, priv_lvl:1 action: ascii LOGIN

  21:40:48.077 Mar 29 CDT: T +: svc:LOGIN user_len:11 port_len:4 (0x4) raddr_len:9 (0 x 9) data_len:0

  21:40:48.077 Mar 29 CDT: T +: user: (* USERNAME *)

  21:40:48.077 Mar 29 CDT: T +: port: tty1

  21:40:48.077 Mar 29 CDT: T +: rem_addr: 10.y.y.y

  21:40:48.077 Mar 29 CDT: T +: data:

  21:40:48.077 Mar 29 CDT: T +: end of packet

  21:40:48.077 Mar 29 CDT: HIGHER (0000002F) / 0/WRITING: write to 10.x.x.x failed with errno 257 ((ENOTCONN))

  21:40:48.077 Mar 29 CDT: MORE: authentication start package created for 47(**USERNAME**)

  21:40:48.077 Mar 29 CDT: HIGHER (0000002F): start write failed

  21:43:01.976 Mar 29 CDT: % SYS-5-CONFIG_I: configured from console by dcmorris on console

  21:43:08.057 Mar 29 CDT: MORE: Queuing AAA request authentication 48 for the treatment

  21:45:24.842 Mar 29 CDT: MORE: Queuing AAA request authentication 49 for the treatment

  21:48:52.494 Mar 29 CDT: MORE: Queuing AAA asks 50 for processing authentication

  You might want to take a look here

  https://supportforums.Cisco.com/message/3965551#3965551

  Jatin kone

  -Does the rate of useful messages-

• Battery, specifically in the night with ios10

  It happens to me all the time, when the night comes and I don my body with this sweet sleep, it's rough on my iPhone.  Really difficult.  I'll just go on my what happened to my phone last night...

  I went to bed around 01:30, my phone was 93%.  Here is a list of things that together did us before going to bed.

  -Set airplane mode because I get horrible service where I live, and I learned that that saves my battery

  -Closed all my apps

  -Night market

  These are normal things I do every night.  Do not forget that I have the app off background refresh and I have like 3 or 4 things in my widgets.  When I woke up just 6 hours and a half later, my phone had fallen to 59 percent.  Normally when I wake up and work all day and use the phone more (not much, I'm not a heavy user), I have no problem.  It's nighttime in general just when I have these problems.

  I had an iPhone before iOS 10 and 6, I had no problem with my other phone that my * service area, but I use call in wifi and FaceTime to correct this, if my phone is usually at home airplane mode.  Got a new iPhone 7 and who seemed to have no problems for 2 days, but now I'm back for the battery drain of night time making my iPhone 6.

  I doubt that is it because I don't see the problem often, but I think that my router is wrong and sometimes I lose the connection, but when the phone is in standby mode and I don't use it I doubt it would be the problem.  When I go to my use of the battery and check what is using what it says Facebook is 23%, and home and lock screen is only at 2% when it is clearly more 30% has been used yesterday evening.

  Any help would be appreciated, I'm fretting here!

  Facebook app is to drain the battery much. I would rather uninstall. But if you need it, there are a few tips to make energy not so consume: http://www.cultofmac.com/420508/stop-facebook-iphone-battery-drain/

  and also check out this article with advice general http://www.apple.com/batteries/maximizing-performance/

• Contact ID battery fast draining iPhone 5s does not

  5s fast drainage and Touch ID sinice 10.0.2 iOS iPhone battery update does not

  Restarted the iPhone since the update yet?

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• iOS 10 battery drain

  Does anyone else have trouble with the life of the battery with iOS 10?

  I have a 5 c and I charge my iphone once per day if that.  Now its hollow when I get up morning so I charge it at work and also I have to recharge at night.

  I need this so because its not good for the trip. I'm going to Germany to visit family if I go in Brussels, I know that the airport has charging stations.  God forbid if I go to the United States to visit his family.

  Bluetooth is disabled. WiFi is on.

  is there something I can do? Any advice will be welcome.

  Thanks - danke schön

  Kimla

  First, plug in your iPhone, let the screen off and do nothing for a long period of time. Leave it plugged in all night while you sleep is perfect for that.

  Then, restart your iPhone by pressing and maintaining the sleep/wake and home buttons.

  You can also try following the suggestions of battery life. Go to settings > farm > find 'Suggestions of battery life.

  In addition, it is preferable to follow the Apple recommendations given in this article http://www.apple.com/batteries/maximizing-performance/

• My magic mouse has stopped working.   Is there a battery that I need to replace?

  My magic mouse stop working.   Do I have to replace a battery?  If so, how?

  If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Since iOS recent upgrade to my 5s my battery drains too quickly.  How to fix this problem?

  I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly.  It never happened until this update.  How to fix this problem?

  Hello kellyfromrexford,

  I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s.  To determine what application or process affect the life of your battery, take a look at the information in these resources:

  On the use of the battery on your iPhone, iPad and iPod touch

  Maximize the life of the battery and battery life

  Take care.

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.