A security group can be used as a reviewer?

Similar Questions

• local group can be used for authentication to the remote user?

  Hello

  Can I use local user databease created the PIX as authentication method for remote access VPN clients. When tried to make using PDM following error has been shown

  "Local group is not taken care of for the user remote auth.of a client remote easy vpn." Please select another group of servers auth... »

  Snapshot of PIX is attached.

  This cliché is: suite menu.

  ---> VPN configuration---> remote access--> vpn cisco client---> select the Group---> edit--> Advanced-->

  Is there is another way, what can I use the local PIX basic data itself to authenticate users from the outside world of the VPN client.

  no doubt this pix is able to authenticate the user remote vpn against its local database.

  Here are the code examples:

  access-list 101 permit ip 192.168.1.0 255.255.255.0 10.1.1.0 255.255.255.0

  access-list 120 allow ip 192.168.1.0 255.255.255.0 10.1.1.0 255.255.255.0

  (Inside) NAT 0-list of access 101

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  ISAKMP identity address

  ISAKMP nat-traversal 20

  Crypto ipsec transform-set esp-3des esp-md5-hmac vpnset

  IP local pool ippool 10.1.1.11 - 10.1.1.21

  vpngroup address ippool vpnclient-pool

  vpngroup idle 1800 vpnclient-time

  vpngroup vpnclient-Server dns 139.130.4.4

  vpngroup vpnclient password cisco456

  vpngroup split tunnel 120 vpnclient

  Crypto-map dynamic dynmap 10 transform-set vpnset

  map remote_vpn 20-isakmp ipsec crypto dynamic dynmap

  Cisco username password cisco123

  AAA-server local LOCAL Protocol

  client authentication card crypto remote_vpn LOCAL

  client configuration address card crypto remote_vpn throw

  client configuration address card crypto remote_vpn answer

• Access control and security group

  Hi all

  I need to know about the access control and what data are suitable for the security group and roles if I have the script like this:

  i. There are 2 different app namely ARA (96 branches with different types of reports) and TRACS400 (6 branches with different types of reports)

  II al ' ARA, users of Branch01 can NOT check Branch02.

  III. different report type is measured by Branch01 and Branch02 are different.

  IV. in Branch01, there are some reports are Read (Cannot download) only and some reports are read and write (downloadable).

  My questions are:

  1. from the above scenario, do I need create all the 96 security group and assign it to different leadership roles?

  2. How can I control read and write access, as I have tested the READ access the user is still able to download the report.

  3. How can I control to branch 01, report Type A is a read and report Type B read and write access?

  4. I noticed that if I use the account, the security group can be used be limited to 50 only security groups. Is this good? I may be an application later in the future. These 2 request for test only. But if I do not use the account, there are any number of security groups that can be used?

  Appreciate for your help.

  Hi aziela

  As mentioned by the friends of the forum, it is advisable to have the minimum security group given that its impact on the scalability of the application (rule). Accounts provide the best security solution of dimension view group.

  Security group corresponds to the role, role is mapped to the users. The permissions are obtained at the level of role-SG.

  Accounts are mapped directly to users. So you can have a precise control at the level of the user (eliminating the abstraction of the role).

  All these aspects are impacting performance where rule of thumb is mentioned in the documentation. In general, if a user belongs to many groups and accounts then it will take more time to process the request of content for this user.

  w.r.t. prohibiting the read-only users so that they will not be able to download content, there is a setting, please try option mentioned in this link http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/e01_interface001.htm#CACCFHHA

  WRT performance calculation, see http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/c03_security003.htm#CSMSP143

  Hope this helps

• Sync phone to PC Client/Server applications use what security group to access the files on PC Win 7

  Programs of client server that connects to the computer from a phone and store data on the PC as the synchronization programs have what user ID and are able to write to the disk by security group file permissions. Users authenticated Internet Explorer, system, administrators, customer ID current user appears on the phone and must be enabled (admin) and the password entered to connect.  If the customer is logged as administrator? How can there be two users with the same user id?  One by the PC and the other on the phone.  If the phone connects the PC as a user in this group what id permissions?

  Question 2: If I agree a technician to fix it to my PC and fix it, what is it connected as? and what group permissions is using?  How to protect against the connection later?

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Block traffic using security groups.

  I want to block all traffic between two virtual machines, for which I created the security in Service named composer SG-WEB group.

  In the DFW, I have two simple rules:

  

  One rule that block traffic between the SG-WEB security group and another which helps everything. But I can still ping WEB1, WEB2 and vice versa. Of the ESXi if I look in the log of the FW I see traffic is allowed for the L2.

  If instead of security groups, I use subnets, everything works fine. I know I have used security groups to identify the DFW traffic, but here does not at all, is this a bug or I'm missing some configuration required to achieve this?

  Thank you.

  What is the status of the VMware Tools in these virtual machines?

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• I forgot the security supervisor password, now I can't use my computer

  I made a password for security due to a grandchild on the inappropriate site - now I can't use my computer.   How can I reverse this problem?  Any help will be appreciated.

  Judith

  You are referring to the password for the 'Access Manager"for Internet Explorer.

  Microsoft policy for these forums is not to provide advice on "getting around passwords"-
  See this sticky post:
  To support this policy, we ask that no related posts to the cracking of password not displayed in our forums. These posts will be removed, and users who post such information can be banned in forums.

  Personally, I interpret it as meaning the passwords that prevent Microsoft software authentication system (its anti-piracy mechanism) or which may allow you to access another computer (for example, how bypass the administrator password).  Microsoft, however, seems to interpret to include advice for 'reset password of Access Manager', but you might find that advice elsewhere.

• Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.

  Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I can't use my printer unless I pay for a company outside tech support to security?

  It tells me that I can't use my printer unless I pay for an outside tech support company to add security.  What specific information?

  Original title: Technical Support

  Wednesday, December 16, 2015, 20:21:17 + 0000, AngeliaR wrote:

  It tells me that I can't use my printer unless I pay for an outside tech support company to add security.  What specific information?

  You have give no details on what your printer is or who told you
  This, but it's not accurate.

  Look like someone trying to rip you off.

• I disabled MS Security Essentials that I use another antivirus - but I like to keep the firewall. How can I determine if it is effective?

  * Original title: Microsoft Firewall

  I read that Windows has a built-in firewall. I disabled MS Security Essentials that I use another antivirus - but I like to keep the firewall. How can I determine if it is effective? If this is not the case, how can I activate it?

  (Moved to programs)

  You cannot run the Windows Firewall and any other 3rd party firewall at the same time. By default, most if not all AV software (competent) devs teams to automatically disable the Windows Firewall when their own is installed to avoid unnecessary conflicts that would occur if both have been enabled at the same time.

  If you want to have the Windows Firewall, you will need to uninstall your antivirus (if it comes with a firewall) 3rd party. If this isn't the case, then you can keep the Windows Firewall is turned on, because it's good.

• Security How can I remove the copy and paste the files I used?

  Security How can I remove the copy and paste the files I used?

  I can't get rid of all the e-mail addresses I have copied and pasted.  No matter what I will always appear if I hit paste again.  This is a shared computer and I would rather not have my copy and paste the files stored on the computer, after that I quit.

  Thank you

  Hi Ron,

  You can copy or move information (for example, text and pictures) between files and programs using temporary storage called the Clipboard. The Clipboard is not visible, so even if you use it to copy and paste information, you never actually see the Clipboard when you do this.

  The Clipboard contains a block of information at a time. Whenever you copy information to the Clipboard, the old contents of the Clipboard is replaced by the new information.

  When you shut down the computer everything is stuck in the memory of the Clipboard is cleared.

  Please click the below mentioned link to get an overview of the clip board memory.

  http://Windows.Microsoft.com/en-in/Windows7/copy-information-between-files

  Answer please if you have any questions.

• can I use same address pool of policies and groups of different remote access VPN tunnel

  Hi all

  I want to create an access remote VPN in ASA different profile. IHAVE a RA vpn already configured to achieve a purpose.

  can I use the same ip address pool used to that existing for the new tunnel-group (to avoid adding rotuing on internal devices for new pool) and it is a temporary condition)

  Thanks in advance

  Shnail

  Yes, the local filtering on the SAA will be perfectly fine. My point of view with different pools is based on customer requests where later after some time, the requests came to distinguish the VPN-users group on servers and so on. For another client, I had to implement filtering on an internal firewall where the VPN gateway (which was out of our control) uses a de.100 pool-. 200. And it's a PITA, if the pools are not aligned on subnets.

  But anyway, your solution will work.

  Sent by Cisco Support technique iPad App

• Can I use Microsoft Security Essentials even if McAfee is installed but has expired?

  Can I use Microsoft Security Essentials even if I had already installed McAfee anti virus, but it is already expired?

  You must remove McAfee before installing Security Essentials, they both can cause conflicts.

  McAfee removal tool - uninstall of McAfee

• Can I use VDS with LACP to reduce on group SAN iSCSI connections?

  I'm trying to reduce the number of iSCSI connections to my EqualLogic storage group. I currently use a standard vSwitch with two ports vmk by server for SAN. Can I use a single vmk with VDS/LACP to reduce my by half by server iSCSI connections and still maintains band bandwidth/redundancy?

  I'm quite confident, it will work, but hoped for validation. Please correct me if I'm totally turned off, or if it would be not supported.

  My volumes cover several physical devices (20 paths for 7 volumes by iSCSI adapter). Can I assume that with load balancing on an OFFSET of the source and destination hash value, I would get at least some balancing between adapters?

  If you have several points of termination targets L2 - 4, Yes. For example an IP address, MAC address, unique ports or. Paths, volumes and devices are not relevant to the LACP.

  If I don't choose a LAG, I can't visualize how it would reduce my iSCSI for my storage pool connections. I'm setting targets on my Broadcom cards, the vmk connects through these cards. Is the logic that is smart enough to only connect the active paths on an adapter or another in an OFFSET? I do know that I have make sense more that I might have to play with a SHIFT on a host isolated for a bit and see exactly how it will behave.

  The adapters are more exposed. The LAG is a logical interface. Traffic can be sent or received through any physical adapter in the GAL.

  Note: I would not use an OFFSET for iSCSI on a vSphere host traffic: seriously, Stop Using Port channels for vSphere storage traffic. Wahl network

• Can I use LEAD or TROLLING with groups?

  Can I use LEAD or TROLLING with groups?
  I want to compare two records in each group.
  
  Is this possible?
  
  Thanks in advance

  Xavi says:
  Can I use LEAD or TROLLING with groups?
  I want to compare two records in each group.

  What do you mean by groups?

  Twinkle