Acer TravelMate P653 - fan noisy at startup

Similar Questions

• Impossible to install Win 7/8 on Acer TravelMate P253-E

  Hello
  I have a problem with the Acer TravelMate P253-E. A friend asked me help choosing phone for basic use, so I recommended it. Now I have at home, due to a problem with the installation of Windows 7.

  Instalation works well until the moment after a restart (the time when installed Windows should illuminate). Laptop restarts again and still not be able to run Windows.
  I tried to install several versions of Win7 x 64 and x 86 Win8 also x 64 and x 86.

  Windows 8 is almost the same thing, but it gives some information:
  He writes the error message: "your pc came across a problem..." "and also"IRQL_NOT_LESS_OR_EQUAL"
  Then the laptop restarts and displays the same error again. After several reboots, he writes that there was a problem during Windows startup and it recomendsme to do auto repair with disc (I tried but it did not help).
  I'm sure that the drives are OK because I used the same retail disk on my laptop a month ago, without any problem.

  Being curious, I tried to install Windows Vista x 86 on it and it worked fine (only problem is that it's Vista and my friends won't and this more, there are no drivers for it).
  Also haven't tried Lubuntu, with the same results - no problem.

  I think that it should not be a problem like this with all new laptop.
  Can you please help me what I need to do?

  Problem is "solved", thank you for reading my data of the problem.

  This was probably caused by a driver included in Win7 and Win8 which was not compatible with the laptop.

  It has been solved in 8.1 Windows instalation so if you want to buy windows for this machine, buy Windows 8.1

• Acer Travelmate P258-MG disassembly

  How to disassemble an Acer Travelmate P258 MG to update the Modules of RAM is - a?

  Service manuals are only available to service centers.

• Acer Travelmate 7750 G freezes completely using Windows or Linux (dual boot). Need help please.

  The problem is that the machine freezes completely without apparent reason, on all operating systems, I tried.  "Freezes", I mean there is no reaction to the mouse movements, keyboard presses and start button / stop pressed off the coast.  The gel seems to be at a random time and may occur even when the system is idle.

  The Acer Travelmate 7750 G laptop came pre-installed with Windows 7 and it kept freezing.  The machine has been updated level of Windows 8, 8.1, 10, then dual boot with Linux Mint 17.3.  The machine froze on all operating systems.  I have tested software hard drive, memory, CPU, GPU and they all managed very well.  Is it someone who has knowledge about how to resolve or others troubleshoot this please?

  RESOLVED - I installed a HDD replacement in December 2015 and the laptop Travelmate 7750 G works perfectly since.  Cost me almost nothing compared to the price of the laptop.  No freezing, crashing or anything else!

  Thank you very much for your help.

• Upgrading RAM Acer Travelmate P256.-m.

  Hi newbie here so please be gentle!
  I have an Acer Travelmate P256 M purchased recently for music production and want to increase the RAM of 4 GB to 8 GB. I bought the relevant stick of RAM, but when I came to install it, I realized there was no obvious hatch on the base of the laptop to access the RAM slots. Sure that I wouldn't have to disassemble the laptop to do this upgrade, but can't find a 'how to' anywhere - any help appreciated please

• Is it easy to change HARD SSD drive on Acer TravelMate P246-M - 53T 2 14 "Laptop?

  Interested by Acer TravelMate P246-M - 53T 2 14 "Lpatop and that you want to upgrade to an SSD, it is simple to swap the disks or the hard drive built into the Board of Directors?

  Any information on this would be appreciated.

  Thank you

  It should be a regular SATA HDD and exchanges with a SATA SSD. I can't find guides to do this on a TravelMate P246-M - T 53, 2. Unless it has a door down to access the HARD disk and memory, you probably need to remove everything down. To the Acers you can take all the screws on the bottom and gently, she jump off and some will be tied down, so much, be careful of who and static damage electronics.

• Acer TravelMate TM5742-7908 - hardrive went wrong, the best SSD to replace?

  Hello

  This laptop was purchased 2011 and hardrive is bad. I want to replace it with an SSD, and I can not know what SSD to buy for this? Anyone can please suggeest one for me, please.

  Spec:

  Acer TravelMate TM5742-7908 LX. TZ903.024 - laptop

  Intel Core i5 - 460 M 2.53 GHz,

  4 GB OF DDR3 MEMORY,

  320 GB HARD DRIVE,

  DVD - RW,

  15.6 "screen.

  Windows 7 Professional 32-bit (A184-15005)

  Laurent, sorry for not getting back sooner!

  I want to thank you for all your help in getting this laptop to life:

  1. Replacement of HD with SSD.
  2. You gave me references for SSDS, I should work with.
  3. I went out and bought the SSD and it went OK, but could not be seen by the BIOs.
  1. You recommended and then buy media eRecovery Acer store.
  2. I purchased and received the eRecovery charged almost without problem.
  3. He then saw the new SSD and continued to load Win 7.
  1. The screen looked really bad on the laptop.
  2. You offered to buy another screen and gave me a link with the exact buying unit.
  3. Once I received it, I replaced the bad.
  4. The new screen seemed quite lovely!
  1. He is now in possession of my wife and she enjoys very much!

  Thank you for having hung in there with me. It took several months to get this project completed!

  Hunter,

• ACER Travelmate 5760 with Windows 10, cannot detect the external projector

  I have an ACER Travelmate 5760. I have upgraded to Windows 10, because Microsoft is launching a few checks and said that I would be able to upgrade. But now, the laptop cannot detect an external projector or monitor. Is there a driver that I need to improve?

  Thank you

  Winifred

  When you connect your projector, if you press the windows logo key + p, are you able to select expand and check if the projector work?

  also, if you right-click on your desktop and choose the settings display, is the acknowledged projector?

  How to connect the projector?

  on the drivers, you try to uninstall the real Intel VGA driver and reboot with your laptop connect on the web and let windows update find new drivers as appropriate.

• Acer Travelmate 5744z does not start, Option not Bios

  Hi,
  IAM having an Acer Travelmate 5744z laptop and it installed Windows 7.
  Yesterday I forgot to stop the laptop while I sleep and today morning when I turned it on it started reume windows, then I accidentally pressed the power button and it is just off. So I pressed the power button again and tried to turn on the system, but it showed something like "Delete restoration data and proceed", so I clicked on this point, BAM my phone fell in bootloop.
  Current condition: menu Acer comes when you press power button No. BIOS options aka F2 Menu appears, then a dash (-) comes on a black screen and then returns to the screen of the acer.
  If someone knows to fix it please help me.

  If you put an installation disc or a system repair disc into the CD/DVD and start, there is a good chance that it starts from the disk. No need to go into Bios.

• Acer Travelmate 8371 Audio and Windows 8

  Hello

  I'm having issues get the Realtek Audio in my Acer TravelMate 8371 working under Windows 8. While the drivers I'm trying generally install without problems as speakers and the line out / mic-in do not work. Is there anyone who got in Windows 8? Maybe some drivers Acer that also works under Win8?

  Thanks in advance!

  Due to the age of the series, we do not support Windows 8.

  We have drivers available for Windows XP, Windows Vista and Windows 7.

  We do not expect the additional drivers that will be displayed for this series.

• Route change ACER Travelmate 240 hard drives.

  I have an Acer Travelmate 240 and you want to change the hard disk, in the former, we're always running out of virtual memory. I have windows XP home on my original HARD drive, although not an XP installation disc, I have the key to windows XP Edition family product Acer incorporated. I have the disks provided by ACER, when I bought the computer. Can anyone tell me if it is possible with what I have and how to do it.

  Just for info:

  If you mean that you see a message like this:

  Virtual memory minimum too low: your system is low on virtual memory.  Windows is increasing the size of your virtual memory paging file.

  It is a configuration problem and has nothing to do with the amount of space on your hard drive.  It could be that you need to set the configuration of your system or you do not have an enough RAM your system to meet the needs of XP and your installed applications.

  The Acer Travelmate 240 I think that has either a 30 or 40 GB hard drive... not huge by today's standards then you will enjoy flexibility when you receive your new HARD drive running!

  While you wait, if you want to continue the virtual memory too low message, here's how:

  If you mean that you see a message like this:

  Virtual memory minimum too low: your system is low on virtual memory.  Windows is increasing the size of your virtual memory paging file.

  This means that Windows XP is to let you know that he does his work.  The message is not an error message - this is an informational message.

  If XP thinks that the size of the swap file (usually c:\pagefile.sys) is too small to accommodate your day-to-day transactions, it will adjust the paging file to expand the pagefile and display this message as it does.  It is not necessarily a 'problem', but the message is boring.

  Sometimes, the message indicates someone was tampering with the XP of the paging file settings to try to solve another problem that usually has nothing to do with their paging file and resolve things inefficiently.

  This could mean that the settings have been adjusted for certain values that don't make sense for the configuration of the system.  Unless we know the system better, you can't just pick certain values out of the air and that your system behaves effectively.  You might not see the message again, but this does not mean that the settings are correct.

  This could mean that the settings have never been properly in the first place when you first install of XP and things must be properly configured.

  Sometimes, as your system configuration changes over time and other applications are running and get bigger, you may add additional RAM to your system to accommodate things (or run the number of requests).

  At least that learn you more about managing memory than Windows XP, it is usually best to simply let XP manage the size of your virtual memory paging file.

  To see what your current, make settings right click post work, properties, advanced, performance settings, Advanced tab, virtual memory, and then click the button change.

  Make a note of the current settings in case you need to change their return more later.

  The best setting for the size of swap file is usually going to be:

  System managed size

  Right click my computer, properties, Advanced tab, Performance... Settings, Advanced tab, virtual memory... Change.

  Note the current setting, so you can change things later if you have a problem.

  If it is already done, on the size of swap file:

  System managed size

  Don't forget to click on Set (to be defined), OK (several times) and then restart your computer.

  Windows XP will attempt to affect a swap file approximately 1.5 times the total amount of RAM installed on your system.  To manage the size of paging file Windows XP is enough for most configurations.

  If your system is not set to the size of the managed system, you must determine how it changed and why (usually a bad reason), make a note of the current settings to change them back later if necessary, and then change the setting to the size of the managed system, click on the Set button and then click on apply to apply the changes (you will be asked to restart).

  "Because someone told me to" is not a good reason to start making adjustments to the size of pagefile.  Setting just above to enlarge it by an arbitrary value can ease the symptoms of the problem and stop message, but may not result in the best configuration for your system.

  If you want your system to operate as efficiently as possible, you must understand what is happening and fix it properly and not only begin to try things or make some arbitrary adjustments.

  The size of the pagefile can really need adjustment, but you should at least try to know what you're doing and why you need to do.  It is unlikely that anyone can tell you how to adjust your settings properly without more information.

  If you don't know what are the best settings, or if you are not sure what should be your settings, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  There will be some personal information (such as the user name and the name of the system), and what appears to be personal information for you, simply delete the personal information of the pasted information.

  This minimize back Q & A and eliminate the guesswork and assumptions.

• Acer travelmate 332 t. Monitor does not turn on

  It is an acer travelmate 332 t. mobile, PII, 256 MB of memory.  I hear it start the system, but no display on the monitor.  The monitor lights. Can you tell me which prevents any display screen?  Ideas or techniques

  Hi nathanielgarrett,

  It seems to be a hardware problem. I suggest you to contact the manufacturer for more help and information.

  http://support.Acer.com/us/en/default.aspx

• My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86

  Hello
  My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86 on W7 driver. The problem is no outside speaker and not micro.

  2 things:

  -Why you are using Vista drivers with W7? No, there is no specific driver for W7 (search the website of Acer support for your machine).
  -you will never get full nombreauses for help, these drivers.
  See you soon,.
  Jerry

• e7240 CONSTANT NOISE OF FAN NOISY / FAN RUNNING ALL THE TIME

  We received 2 nine E7240s directly from Dell, one for me and one for my colleague. As soon as I turned it on to build for my colleague, I noticed that the machine was overheating and the fan made a noise. Dell offers an upgrade of the BIOS that has not changed anything. They then changed the radiator, even once, that does not change and since then, they have changed the motherboard. My colleague went on vacation, so I don't know if the problem has been resolved, however, my laptop day you do not overheat (also of course as it has done for my colleague) BUT THE FAN RUNS ALL THE TIME. So much so that I think that the person in the room upstairs is using his hairdryer. Dell has replaced the heatsink of heat and the motherboard yesterday, I did the same update of the BIOS and the problem is even worse. As soon as I turn the thing, the fan runs all the time making a big noise. My predecessor was the E6500 and I was not bothered by noises, he did.

  The 7240 made so much noise that I want to throw it out the window , seriously, I go back to my old 5 years e6500, which is now very slow, I can not just take constant hair dryer of the fan noise! I'm waiting for Dell back to me, but I don't see what else they can do.

  I suspect a problem of design with newer models, someone with a laptop computer Latitude 13 also mentioned it on the Forum, someone else with an e7240 also said "I noticed the fan turns most of the time - it's quiet, but you don't know is spinning."  I just implemented, so the CPU is busy enough. "A person with the e6320 says"and the fan is noisy and turns far too often.

  I just bought a new Dell Latitude E7240 with Windows 7 laptop and had the same problem with overheating and the fan is running loudly all the time. I just fixed it on my laptop, it may not work for everyone but just in case I walked it here.

  The index for me was that the question has happened at home, not at work.

  • Using the Task Manager, I found that a "svchost.exe" process was always running at 25% of the CPU, i.e. to take 100% of one of the 4 hearts. For this you need view all processes, and that's why you need a local administrator account if she asks permission.
  • With right click on this process-online 'Go to services', you can study what services are hosted by this instance of svchost.
  • For each of these services, try to stop one at a time (if it helps) and see if the CPU usage goes down. For me, a clue was a service stuck on 'Stop' but never stopped.
  • The service which for me was the "HomeGroup provider." That's why the issue has happened at home and at work. The laptop had spotted my homegroup on my home network, but had not been able to accede. Maybe a problem with IPv6 that I could not turn on my desk.
  • In the Services tab in Task Manager, get on the service properties, which set to Disabled Startup Type.
  • Restart the laptop, to ensure that the service is stopped.

  That did the trick for me, and now the CPU remains less than 5% when idle. This isn't the problem that the fan is noisy when the CPU usage is high, but for me what rarely happens now.

  If you want to access files and printers on your home network without the homegroup feature, you can still do that the old way:

  • Network and sharing Center-Online avancΘs => Homegroup Connection-online 'use user accounts to connect to other computers.
  • Also in the settings advanced: enable discovery network. and Turn on File and Printer Sharing.
  • Then, you can click on your wifi network => add a printer.
  • If your office does not appear, click on "Not listed", then browse. As long as the network discovery and printer sharing are enabled, desktop PC should appear and you can connect using your local Windows user name and password.

  Hope this helps someone.

  Peter

• Fan noisy and slow speed for the Macbook Air with 10.11.4

  I hope you can help me.

  I upgraded 10.11.4 on my Macbook Air a couple of days. It is a model of 2013 Mid, 1.7 Ghz Core i7, 8 GB of RAM.

  I don't know exactly what my last update was - but was El Capitan any.

  I tried LANDAU and SMC resets.

  Previously, she has chugged along fine. The fan was quiet most of the time - only hit on when I used Lightroom.

  Now, the fan kicks on regularly, most of the time actually. And it's MUCH slower. Very lag sometimes when you type in Wordpress, for example. And lightroom is much slower. Also, when I use FaceTime, video often turns itself on and off--with a message informing me that it will resume when the computer cools down. Yet the back of the computer does feel not hot at all.

  I tried page of Chrome in Safari. Doesn't seem to help much.

  I am currently traveling to the Peru and did not my hard drive with my last backup, Time Machine, by hand, so as I understand it, I can't go back to a previous update.

  The Kernal task often seems to have a very high CPU %: 250 or.

  Right now, I'm trying to download the Combo, I read that this can sometimes fix glitches.

  Any help is greatly appreciated!

  The kernel uses excessive CPU cycles. Here are a few possible causes for the State. Some may not apply to you.

  FileVault

  Please, open the security and privacy pane in system preferences and click the FileVault tab. If there is an indication that the encryption or decryption is in progress, wait (possibly several hours) so he can finish and see if there is an improvement.

  Limitation of the

  When he does readings of high temperature in the material, or a MacBook battery low voltage readings, the kernel can try to compensate by interrupting the processor to slow them down and reduce energy consumption. This condition may be due to:

  ☞ an accumulation of dust on the logic board

  High ambient temperature ☞

  ☞ a defective battery or worn in a laptop

  ☞ the malfunction of a cooling fan, temperature probe, a probe or some other component voltage internal

  Note that if the problem is caused by a sensor, there can be no real overheating or undervoltage.

  If the computer is portable, try with and without the power adapter connected. If pigs kernel_task processor only on current alternative, load is causing the machine to heat up. This behavior may be normal for some models, but it can also be an indication of a hardware failure.

  Apple diagnostics or the Apple Hardware Test, although not very reliable, is sometimes able to detect a fault. For more in-depth material test, an appointment of 'Genius' to an Apple Store, or go to an other authorized service provider.

  If all goes well with the material, then everything that you can do to improve the cooling can help.

  Software installed

  The software installed by the user which includes a device driver or other kernel code can thrash of the kernel. This category includes virtualization, such as Parallels and VMware software, as well as products 'anti-virus' more commercial. Some system monitoring applications, like "iStat", may also contribute to the problem. You can test this possibility to completely disable or remove the software according to the instructions of the developer or start in safe mode. However, it should be noted that the deactivation of a modification of the system without removing or test in safe mode is not as easy as you think.

  Corrupt NVRAM or MSC data

  Sometimes, the problem is cleared up by resetting NVRAM memory or MSC.

  External display

  Connect an external display to some models of MacBook Pro while the lid is open can cause this problem. If necessary, use the external clamshell modescreen.

  Other devices

  Disconnect devices wired everything except those needed at startup and remove all the expansion cards of third parties (if your model.) If the problem is resolved, reconnecting devices one by one by one until you identify the culprit.