Adding watermark to multiple files/folders in the batch

Similar Questions

• How to tune a myself to several files/folders at the same time?

  • I have a lot of music and video files that have suddenly become unresponsive to any media player after a connection Xbox Media Center (music/videos appear, but no action follows after that as they are accessible, media players and the Xbox Media Center don't always work correctly).
  • I can play one song/video after changing its properties (security permissions), which gives full control to me, the administrator manually. -Too much work for 4000 + files.
  • My current media player is iTunes, but also Windows Media Player fails to play the music/videos.

  Thanks for the reply, but I need to know how to proceed for several files/folders at the same time.  This particular set of directions only explain how to set permissions to a single.

  In Windows Explorer, select all the folders that you want to change the property on, then right click on ONE of these folders (your selections will remain)
  Choose Properties > Security > advanced > owner > edit
  Make your changes and do not forget to check the "Replace owner...". "downstairs.

  With thousands of files, it may take a few minutes. VP Tech Services

• PC, Lr, folders, Action: moving files/folders on the hard disc autour, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged? If so, how can I move files? Thank you

  PC, Lr, folders, Action: moving files/folders on the hard disc autour, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged? If so, how can I move files? Thank you

  Duplicate thread: PC, Lr, folders, move files/folders on the hard drive, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged?

• PC, Lr, folders, move files/folders on the hard drive, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged?

  PC, Lr, folders, Action: moving files/folders on the hard disc autour, download WARNING "move files on the disc, if you continue, this move... change... can be undone. question: my original files will be damaged? If so, how can I move files? Thank you

  No problem. I think that the warning means that you will not be able to use Undo to bring back the pictures and it will have to do it manually. There is no risk of corruption.

  HAL

• I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  Hi sindres79946597,

  Open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in the new tab in the same window.

  Now, reboot your system, when you open multiple PDFs that all will open in a new window so that you can easily compare.

  Kind regards
  Nicos

• Cannot add files/folders to the Media Player library

  Hello.  New user of Windows Media Player (WMP) here.  Using Vista business so I think I have Media Player 11.

  I have MP3 (converted M4a format) files on an external hard drive.  WMP will play them very well, but I can't seem to add them to the "library".  I tried to manually add the folder to the external hard drive, these files are in the folders that WMP scans to add items.  When I press 'OK', WMP seems analysis this folder added (it shows some 3 000 scanned files), but it only shows nothing added to the library.

  I cannot rip from CD for this external hard drive and WMP looks ID, create folders and copy the songs to the disc hard drive very well (AND add them to the library very well).  But I can not "RIP" these MP3 files anywhere... "RIPPING" seems to be only for the files on CD and the computer.

  I must be missing something simple!  Is it possible to add these existing MP3 files to my library?

  Thank you!

  Your library has probably been corrupted, so it needs to be reset, by following the instructions for WMP 11 Vista at http://zachd.com/pss/pss.html#medialibrary . Note the reset of the library will make you lose all the counts to play and possibly ratings too.

  After the reset of the library, add the folder music on the external hard drive to the list of WMP watched folders.

  Tim Baets
  http://www.BM-productions.TK

• Windows XP SP3: Unable to start, System Restore cannot drag and drop ALL the files/folders on the desktop and applications, many unable to start, services cannot search, cannot copy or transfer the any files folders...

  After a recent power outage, my system has restarted with a weird and very common Windows problems range. The system boots fine, all my personal files/folders/apps are intact, have suddenly stopped almost all functions of applications, but many crucial functions of the Windows kernel. Everything seems to point to several Windows Services are unable to start (administrative tools on the start menu). I am running Win XP SP3 and that he was going to upgrade to Windows 7, but I wanted to backup everything in advance. As I have 29 000 hours on my C: drive and a lot of time invested in my system, files, and applications, I am extremely reluctant to risk losing my files and applications by performing any type of reinstalling Windows. Strangely, begin to almost all my apps and all my files are accessible for the most part, but I've lost the ability to drag and drop files, folders or items in a list within the applications COMPLETELY. I can't copy or paste anything, can't move the desktop icons (although I can create new files and folders). So at the moment I can't save anything or even a single file transfer to a hard drive on another storage medium. Immediate reaction: try safe mode and try the system restore safe mode has the same problems (likely due to the large number of system services that inexplicably refuses to start) and the system restore says an error window saying "system restore is not able to protect your computer at this time. try restoring the system running and restart again", which of course NEVER changes. It's the equivalent of getting a tire on your car in the middle of nowhere to find the spare tire flat and the missing Jack. I have used to be fanatical about the definition of the regular restore points, but now can not access them. I have backups of most of my personal files, but over years have lost most of the original installation CD for many of my applications (there are over 100 applications on my system) and I don't want to lose the file associations and architecture of directory tree that it took my so long to implement. I started with Win XP media center edition of first (circa 2004 or almost) and have migrated twice more of 3 hard disks and 2 computers. All this time (5 years of daily use), I have NEVER known so many malfunctions for as many Windows basic and vital functions at the same time. I tried a lot of 3rd party "windows fix - it / registry repair" apps, all have no effect. Everything I can speculate is there was some serious damage to the registry and have no idea how/why so many Services refuse to start. In MMC, more than half of the services actually start and run, the rest all give the error message "the service or dependencies is not start (error 1068).» In addition, very oddly, no. APPS or windows appear in the toolbar AT ALL, but the Quick Launch toolbar works very well, just like the tray button and start tasks (?! )!). If I reduce a window, it "disappears" (Nothing on the task bar), but I can restore it using the alt - tab keyboard shortcut to switch apps, so all applications/windows appear on the list of the Task Manager. A few apps is paralyzed bad, as the player windows media, itunes, etc. (I guess because the service windows audio can not not start), some won't start at all, but 90% of them work fine, except to try to copy or back up all files. I can create new files, however. I'm desperate to find a solution to repair XP3 Win WITHOUT losing my installed applications and files, before I try and switch to WIndows 7. Any help/suggestions/links/advice would be much appreciated. I'm an experienced user, but I've never met so many malfunctions based on the OS at a time. I, however, very painfully learned (years before that my system so complex) it's been almost a re-installation of Windows guarantees to lose my installed apps and files, the directory tree architecture associations.

  Help, please!

  I'll be honest with you - your message is so difficult to read that I don't bother to go through all that. Next time consider using white space, ball or points numbered, etc. to make your message more readable. I stopped reading after your first sentence and only scanned the rest quickly. I do not mean to hurt your feelings; just trying to help you get targeted answers you need for the future.

  The blackout has corrupted your Windows installation. Back up your data now. Since you have problems so much, it would be probably best is to remove the hard drive, put it in a USB drive enclosure and attach it to another computer to copy the data OR start the target with Linux Livecd such as Knoppix system and copy the data to an external hard drive. IOW, do not use the damaged windows to try to get your data.

  You can try a repair that will leave your programs and facility data intact, but with this widespread bribery, it is unlikely to work. However, it takes only a few minutes and is so worth a try. If the repair facility does not work there is nothing to do, but a clean install. And Yes, it will mean that over again.

  Consider buying a UPS to help prevent future damage by power outages. For a single computer, you should look for one in the area of $60 to 80. A more expensive UPS is not necessary. Another good disaster recovery strategy is to buy an external hard drive and Acronis True Image. You can image your system (and can make an incremental backup image so that your image is still current). You can apply your image and be back running that you were in relatively few minutes after a hard drive or Windows to fail.

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• Adjust overall color of the process used in multiple files open at the same time?

  I often draw series of illustrations (maps) using the same overall color of the process and later to adjust the value of the color in all the files.

  In previous versions of Illustrator I just all the open files and adjust the color values in a single file and all other files automatically got the same values and could still be saved.

  This does not work in Illustrator CC 19.1.

  How to do this in a way effort now?

  Please tell the history of the ease of sharing 'lost in versions '.

  I asked at the start of the best technical sharing and setting/editing of uniform colors between multiple documents.

  We cannot link to a shared color palette and just edit this palette because the colour palettes apply only to the actual document when used.

  I tried a work-around, which probably works for my needs, is the attached illustration.

  I work with a set of four-color CMYK defined as Global colors, so I only need to adjust the CMYK values in the color chart to affect all the colors used in the document.

  But this only applies to the actual document and does not, when objects are copied/pasted between similar files.

  Instead, if I name the Global CMYK color chart (e.g.Pink) definition instead of simply use process values (0-70-20-0), give me a change to update a definition when copying objects between similar documents. If I choose "Merge swatches" in the dialog box "Swatch Conflict", the old 'Rose' (original) color will be updated to the new definition of the "Rose".

  This could be useful for others?

  

• Export multiple files .ase of the indesign document

  Hello

  I have an indesign document that has approximately 1 000 palettes of colors on it.

  There are 5 colors in each color scheme and each pallet is made using 5 boxes of color (see attached template).

  I need to export each of these palettes of colors as indivdual .ase files.

  The only way I can do now is to copy and paste a range in a blank indesign document so I can identify the 5 colors used in the chart, select these 5 colors and then export it as an .ase file.

  Is there a way faster and more reasonable to do?

  Best regards, Tim

  Sorry, but I can't help you there. I would have found a different way from the outset. 5000 samples in one document is not exactly what I would call effective.

  You can try to copy and paste objects into an empty file and then export from there.

  Bob

• Ix2 Lenovo how to download several files/folders at the same time?

  Hey, my team and I use the Lenovo ix2 because most of the free services, we discovered can legally steal your work. We have a log of things back and wish I could just download it in one fell swoop. It is that none of us are qualified to layout network or ilk. Which brings me to my question:

  Currently if you add a file you can add is a file at a time. Is there a simple way to be able to download a bunch of folders with files in them at the same time?

  Hello dmurtha,

  Here is a link to our support page, where you can find the manual of your device:
  https://Lenovo-na-en.custhelp.com/app/home

  Once you have a mapped share, it essentially functions as a local disk.
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how%20To%20Map%20A%20Ne...

  What this means to you is you can copy and paste, drag and drop, files or directories to the mapped share and everything in this file or directory is copied to.

• How to get a list of all files/folders on the Sansa Clip +.

  Hello

  I have a lot of MP3s on my Clip +, but realize that I put there duplicates in different folders. My plan was to use a command prompt to get a list of all the files on the device, and then use a utility that shows me duplicate names and the locations of the files. I could then simply delete the Clip +.

  The problem, it is that the Clip + is simply presented as a 'portable' in Windows Explorer (Windows 7 Home) - there is no way to assign a drive letter :-( Which seems a bit odd, as it is, after all, plugged into one of my USB ports... I used the dir command on all drives assigned in my computer as "devices with removable storage". One of them must be the port to which the Clip + is attached, but they all say "device is not ready". So the Clip + is not identified in this way.

  Is it possible at all to get a list of the files that are on the Clip +?

  Thank you!

  That's how the Clip + shows when connected in USB MTP mode.  If you connect mode MSC (defined in the control panel), Clip + comes as a disk.

  But: the problem you have is, Windows displays only the files that have been transferred in the Clip + under USB mode then logged in as.  I don't know if this applies to designated offices, but - you could try and see.

  Another solution would be to copy all of your files on your computer, under MTP mode; Delete the files on the Clip +. move the Clip + mode MSC; and then transfer the files to the Clip +.  Now, you should be able to see the files under Windows (always connected in MSC mode) and can run the utilities that you had planned.

  I hope this helps.

• How to remove several files/folders at the same time (single, right?) HA!

  In the old days, you used to be able to highlight the files or folders you want to get rid of using the control key or left click or drag. I can't do it now! How the hell can I remove a bunch of stuff in a folder without having to click on each one separately and delete? I wish I had a more difficult question for you... lol.

  The game, July 1, 2010 00:27:39 + 0000, Bethy4444 wrote:

  In the old days, you used to be able to highlight the files or folders you want to get rid of using the control key or left click or drag. I can't do it now! How the hell can I remove a bunch of stuff in a folder without having to click on each one separately and delete? I wish I had a more difficult question for you... lol.

  Click on one, hold the CTRL key and click the last
  one. Which selects all of the files from one to the other. Then press
  Remove.

  Ken Blake

• Merge data multiple files problem (repeats the data)

  I'm tring to creat some cataloge pages with 4 images, codes, etc. by page dicritons.

  I have an excel sheet that I have saved in a CSV file to a data source. I have a page with the first record in the superior room and enogh to repeat the record 4 times on the page. When I do the merging of data I'v selected several records per page and put in all spacing and the settings I want.

  Everything seems fine when I click on the multiple reports prevew but when I do the actual merge most mergers copy the same data with only a few records using different data. It generates the right number of documents and pages with 4 records per page, but repeatiing the same record, with the exception of 2 files that were different before returning to the repeating record. Also the record that she repeats is not the first record on the list, it's the 6 of 16.

  I use the version of Indesign CS5.

  One has any suggestions to make it work corrctly or is it a fault wiyh CS5?

  Are you by chance using Preview, then going back or anything like that before running the merge? Another user seems to have identified a bug concerning the box preview last week. Do NOT check that box seems to work very well, as did go directly to merge after checking the box, but every thing has a problem.

• Convert multiple files without displaying the result?

  I use Pro Acrobat 8.1.1 with Windows Vista Enterprise SP1 and Word 2007 SP1.

  When you convert a single PDF from Word document, I'm able to prevent the PDF from opening to uncheck 'view Adobe PDF result' in the addon preferences.

  If, however, I convert multiple documents via the context menu in Windows Explorer opens every resulting PDF file.

  Is there a way to avoid this?

  You make the same change in the properties of the printer to your system, rather than in the print menu. START > PRINTERS > right click on the Adobe PDF printer, then select Properties.

• How to play multiple files continuously in the display of files in cs6

  I have a bunch of mp3 or WAV files to the top of my window "files."   I would like to listen to them back to back without loading them on the multi-track one after the other.  Is there a way to do this?

  If you highlight the whole of each file and press F8, you will create a range of markers covering the whole of it. You can now drag these beaches in the window of markers directly to the reading list (window > Playlist), and if you press the play button on playlist, it will play them in the order that you put them in the list.