AdvancedDataGrid - add columns with ActionScript

Similar Questions

• Unable to add columns with constraints

  Hello Experts
  
  I try to add a column in my table with constraints. Oracle is not letting me do. Can please somebody correct my mistake. Here is my command
  
  ALTER table adeel_emp_003
  Add (sinnum number (5))
  constraints UNIQUE ad003_sinnum_uk (sinnum)
  
  
  Thank you very much in advance,

  Centinul wrote:
  I think it's easier to do it in two pieces, as shown:

  Nothing complex to do in a single statement. OP needs just RTFM for the correct syntax. For example:

  SQL> create table emp1 as select * from emp;
  
  Table created.
  
  SQL> alter table emp1 add (x number, constraint emp1_x_uk1 unique(x))
    2  /
  
  Table altered.
  

  SY.

• How to add columns with values of each folder?

  Hello

  I am a novice to the Disqualification and here my question:

  I want to be able to add the number of columns in the "not null" by registration, as compared to a reference table and return a value.

  For example:

  Article-1

  Agenda	Value-1	Value-2	Value-3	Value-4	Value-5
  Article-1	blah blah	blah blah blah			bla
  point-2	blah2		blah3

  In this example, the "point-1' has 3 columns populated so I'll compare against my reference data that dictates the number of columns MUST it have completed.» Whether all withdrew, point passes through, but if she does not meet the minimum requirements, it is reported.

  I tried to use the "No. Data Check" tool, which report on the null columns, but I can't understand how to add.

  Thanks for the help!

  In this case, i.e. If you want different thresholds for different records, use a set of baseline mapping family (string) and threshold (number) and use Enhance card on this reference data set to add the value of threshold appropriate to each record data before using the attribute cross check to compare the threshold against the real value.

• How to add column after select *, ABC

  Dear friends,
  
  I create report with SQL query
  

  select * from CRM_ISSUE_PROBLEM IP where IS_ACTIVE ='Y'

  I want to add BILLNO column below after Select * look like select *, nvl ((select count (case_id) of CRM_ISSUE_PROBLEM_DETAIL AD
  (where IP.case_id = AD.case_id GROUP BY case_id), 0) AS BILLNO
  CRM_ISSUE_PROBLEM IP where IS_ACTIVE = 'Y '.
  
  

  nvl((select count(case_id) from CRM_ISSUE_PROBLEM_DETAIL AD 
  where IP.case_id=AD.case_id GROUP BY case_id),0) AS BILLNO 

  How to add column with using Select * SQL query.
  
  
  How can I do this?
  
  Thank you

  Hello

  select IP.*, new_column
  ....
  from TABLE IP
  

• How can I select all the cells in an AdvancedDataGrid with ActionScript?

  How can I select all the cells in an AdvancedDataGrid with ActionScript? I selectionMode = "multipleCells" and designViewDataType = "flat".
  Basically, I have a contextmenu and want to add a "select all" option.
  
  Thank you

  Yes you can do in actionscript as well.
  If selectionMode is set to multipleCells then:
  Section A Code attached

  If selectedMode is set to multipleRows, then there are two ways to do it.
  1 - the solution is given by Bryan Dresselhaus in his last message.
  2-section B in the attached Code

• Please let me know how I can add a new column with a constraint not null, table already has data, without falling off the table... Please help me on this issue...

  Hello

  I have an emp_job_det with a, b, c columns table. Note that this TABLE ALREADY has DATA OF THESE COLUMNS

  IAM now add a new column "D" with forced not null

  Fistly I alter the table by adding the single column "D", if I do, the entire column would be created with alll of nulls for the column DEFAULT D

  ALTER table emp_job_det Add number D; -do note not null CONSTRAINT is not added

  Second... If I try to add the constraint not null, get an eoor as already conatained null values...

  (GOLD)

  In other words, if I put the query

  ALTER table emp_job_det Add number D NOT NULL; -THROWS ERROR AS TABLE ALREADY CONTAINS DATA

  So my question is how how can I add a new column with a constraint not null, table already has the data, without falling off the table

  Please help me on this issue...

  Add the column without constraint, then fill the column. Once all the rows in the table are given in the new column, and then add the constraint not null.

• Need to add a column with a default value

  I need to add a column of type char (1) to a table and there should be a value default of'm '
  
  I want to check first if this column already exists in this table.
  If so, I still want to check if the default is am'
  
  How can I do this?
  
  I was able to all_tab_columns to query for the presence of column with the type of data and all, but not able to do the second part.
  
  Thanks in advance.

  The DATA_DEFAULT field in dba_tab_columns stores information.

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• How to fill a column with numbers and maintain when adding or deleting lines?

  So far, I've discovered two ways to fill a column with the number:

  1. Enter '1' in a single cell, '2' in the one below, select both, and then use the yellow dot to drag down - it will do the rest.

  2 create a formula such as 'A2 + 1' and drag also.

  However, in both cases it will work if I manually this continues to do for each newly added line at the bottom. Now, that alone would not be that big of a problem if it wasn't for the fact that I'm working with a table where the lines can be added among other rows in the future.

  Having said that, could someone please tell me how to create a column with a number that will increase automatically? I mean - if I add a new line between line 56 and 57, I want the new line to have a '57"in it, and the" old 57 "would now be"58"and so on." " I don't want to drag the whole column, which can be hundreds if not more than a thousand lines.

  Try to put this in the cells in the column:

  = ROW()

  In the formula, you can add or subtract a number if necessary to get the starting number that you need.

  SG

• Add columns to the table

  I'm having a bit of a basic problem here...

  I start with a waveform D 1 from a request of data acquisition, which contains ~ 22 columns of data corresponding to the different measures. I wanted to take the first 20 columns of data and add the "column vectors" (i.e. each measure) for a 1 d table (the sum of the first 1 22 tables/measures/vectors). The logical way to proceed, it seems, is by indexing the waveform with a loop, conversion in DBL and then adding each column with a registry change.

  1 d Waveform--> for (indexed) loop--> get waveform components to get the DBL table to the index column--> go to 'add block '.

  And then, using a shift register, I add each column in the index.

  However, I get no output once for the finished loop.

  Any ideas? Examples are JPEG/png files please!

  I'm a big fan of doing things the easy way.

  

• Cannot create a clean column with links

  Dear friends of the APEX,

  I'm developing an interactive report and you want to have in it a clean column with links instead of the standard "pencil" - column.

  I explain it by the example of https://apex.oracle.com/pls/apex/f?p=81683:1:

  I want that "Deptno" column had links with the viewer just as single line "pencil" - column a.

  My idea was to change the type of column "Deptno" of plain text to link.

  But, unfortunately, when I did in the pictures Page and save the modified Page Builder type column to return to 'plain text '.

  Anyone here know, what I did wrong?

  Thank you very much!

  LHOST

  Franck wrote:

  I'm developing an interactive report and you want to have in it a clean column with links instead of the standard "pencil" - column.

  I explain it by the example of https://apex.oracle.com/pls/apex/f?p=81683:1:

  I want that "Deptno" column had links with the viewer just as single line "pencil" - column a.

  Why would you do?

  My idea was to change the type of column "Deptno" of plain text to Link.

  If unique lines are not identified using a PK column, add ROWID to the projection of the report query and set the Type of this column to hidden column.

  Set the Type of the DEPTNO column on link, the link target #, #DEPTNO #and attributes of link to link text class = 'a-IRR-detail-row' data-line-id = "" #ROWID # "." Replace "ROWID" with the PK column name when unique lines are identified with a single column value. Save the changes.

  But, unfortunately, when I did in the pictures Page and save the modified Page Builder type column to return to 'plain text '.

  Anyone here know, what I did wrong?

  You changed the type of column 'Link' but did not enter the other properties needed to operate it as a link.

• ALTER TABLE hf_altertest ADD COLUMN does not

  I am using ORACLE 11g and my FDI is Developer SQL 4.1.1

  It's all free PC version that has limits.

  I tried on:

  CREATE TABLE hf_altertest

  (

  contact_id INTEGER NOT NULL

  , name VARCHAR (25)

  , last_name VARCHAR (35)

  PRIMARY KEY (contact_id)

  );

  ALTER TABLE hf_altertest State to add a CHAR (2) COLUMN;

  But when I go to run the ALTER TABLE statement then I get following error:

  rror starting at line: 1 323 in command.

  ALTER TABLE hf_altertest State to add a CHAR (2) COLUMN

  Error report-

  SQL error: ORA-00904: invalid identifier

  00904, 00000 - '% s: invalid identifier '.

  * Cause:

  * Action:

  I can run the same code in MySQL without error.

  This leads me to think that maybe I'm just bumping into a limit in the free version of PC.

  Any thoughts?

  3003916 wrote:

  I am using ORACLE 11g and my FDI is Developer SQL 4.1.1

  It's all free PC version that has limits.

  ALTER TABLE hf_altertest State to add a CHAR (2) COLUMN;

  But when I go to run the ALTER TABLE statement then I get following error:

  rror starting at line: 1 323 in command.

  ALTER TABLE hf_altertest State to add a CHAR (2) COLUMN

  Error report-

  SQL error: ORA-00904: invalid identifier

  00904, 00000 - '% s: invalid identifier '.

  * Cause:

  * Action:

  I can run the same code in MySQL without error.

  This leads me to think that maybe I'm just bumping into a limit in the free version of PC.

  Any thoughts?

  There is no LIMIT to the 'free' version  If you read the error message he said THAT was not a valid identifier.  Just to show you that I tried your erroneous statement

  ALTER TABLE hf_altertest ADD COLUMN state2 CHAR(2);
  

  and here is the indicator error message in SQL +.

  SQL * more: Production of liberation 12.1.0.2.0 Tue Oct 15 14:34:57 2015

  Copyright (c) 1982, 2014, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  With the partitioning, Real Application Clusters, Automatic Storage Management, OLAP

  and Data Mining options

  Add a COLUMN state2 TANK (2)

  *

  ERROR on line 2:

  ORA-00904: invalid identifier

  As you can see (and as the previous poster of response indicates), the 'COLUMN' KEYWORD is not necessary when adding new columns.  Only when 'RENAME' is used, then you add the keyword COLUMN.

  See the documentation for the syntax of ALTER TABLE here--> http://docs.oracle.com/database/121/SQLRF/statements_3001.htm#SQLRF01001

  See specific clause RENAME syntax here--> http://docs.oracle.com/database/121/SQLRF/statements_3001.htm#i2183480

• Invalid procedure after alter table add < column >

  Hello Experts,

  I was faced with a situation where I add a column in a table that is used in a procedure, immediately after the addition of the new procedure associated with this table column becomes invalid.

  Can someone explain please know why this happens.

  Database version:-11.2.0.4.

  I was faced with a situation where I add a column in a table that is used in a procedure, immediately after the addition of the new procedure associated with this table column becomes invalid.

  Can someone explain please know why this happens.

  Yes - the Oracle documentation explains this. I found this doc with a simple search of "column, add the oracle 11g invalid procedure.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28318/dependencies.htm#CHDJIIFC

  Table 6-2 , shows how objects are affected by changes to other objects upon which they depend.

  Table 6-2 operations affects this object status

  Operation	Where the status of dependent objects
  ALTERTABLEtableADDcolumn	INVALIDWhen: Uses of the object (except a view)-dependent SELECT * on table . Dependent object uses table %rowtype . Dependent object performs INSERT on table without specifying a list of columns. Dependent object references table in the query that contains a join in SQL. Dependent object references table in the query that refers to a PL/SQL variable. Otherwise, no change.

  Read the WHOLE ARTICLE and see if it does not have to explain your problem.

• Add column according to date

  Hello

  I want to add column as from Time_period conditon below

  If the review date is between the date of yesterday for a week, then it should display as "week1.

  If the review date is 2nd week, then it should display as "semaine2" and so on.

  I tried, but do not get the correct result.

  Can someone help me.

  Thank you

  with abc as

  (select 101 as id, to_date('21-JUL-2015','DD-MON-YYYY') as double union review

  Select 102, double union to_date('17-JUL-2015','DD-MON-YYYY')

  Select 103, to_date('13-JUL-2015','DD-MON-YYYY') of double union

  Select 104, to_date('12-JUL-2015','DD-MON-YYYY') of double union

  Select 105, double union to_date('01-JUL-2015','DD-MON-YYYY')

  Select 106, to_date('01-JUN-2015','DD-MON-YYYY') of double union

  Select 107, to_date('29-JUN-2015','DD-MON-YYYY') of double union

  Select 108, to_date('07-JUL-2015','DD-MON-YYYY') of double union

  Select 108, double to_date('03-JUL-2015','DD-MON-YYYY')

  )

  SELECT id,

  -case when trunc (review) between trunc (sysdate)-1 and trunc (sysdate)-7 then "week1.

  When trunc (review) between trunc (sysdate)-8 and trunc (sysdate)-15 then 'semaine2 '.

  When trunc (review) between trunc (sysdate)-16 and trunc (sysdate)-23 then "week3.

  Another 'other '.

  end as Time_period

  ABC

  Hello

  You must provide the lower date first in your between the declaration

  -case when trunc (review) between trunc (sysdate)-7 and trunc (sysdate)-1 then "week1.

  When trunc (review) between trunc (sysdate)-15 and trunc (sysdate)-8 then 'semaine2 '.

  When trunc (review) between trunc (sysdate)-23 and trunc (sysdate)-16 then 'week3.

  Concerning

  Marcus

• Go add column in my inside, select

  Hi all

  I tried to put my script using the table emp and need your help to get my task done:

  My query is below:

  SELECT EmpNo, ename,

  (SELECT deptno

  OF the emp A

  WHERE A.empno = emp.empno)

  EMP;

  ------------

  Now, I want to add another column with my inside, select something like below:

  Query

  SELECT EmpNo, ename,

  (SELECT deptno, hiredate

  OF the emp A

  WHERE A.empno = emp.empno)

  WCP

  -------------

  I added hiredate inside select but I get the error below:

  Error

  ORA-00913: too many values

  00913 00000 - "too many values.

  -------------------------

  My question is that how will I integrate new column in my inside, select without using select distinct internal. Really appreciate your advice. Thank you

  Concerning

  Line

  
  

  979596 wrote:

  Amazing and thank you for your query, will check in detail and let you know, but the thing is that how did you that?  I wonder if you can explain your query more then I really appreciate it.

  First, we must get our condition and set the line number with order by e.manu_date for each e_id read ROW_NUMBER:

  As we have for where e.p_nm in ('BUMPS', 'ESP') our query should return 2 records for each e.id, and we numering it

  SELECT e.*,

  ROW_NUMBER() over (partition by order by e.manu_date e_id) r

  Of e e_package

  where e.p_nm in ('BUMPS', 'ESP')

  
  

  E_ID	P_ID	P_NM	MANU_DATE	R
  100	1	ESP	01.01.2013	1
  100	2	BUMPS	01.02.2013	2
  200	5	ESP	01.01.2013	1
  200	6	BUMPS	01.02.2013	2

  
  

  After that we pivot data with function of pivot that works starts with the 11 g version with our number line and receive each p_id, p_nm, the manu_date
  

  
  

  Select *.

  from (SELECT e.*,

  ROW_NUMBER() over (partition by order by e.manu_date e_id) r

  Of e e_package

  where e.p_nm in ('BUMPS', 'ESP')) q

  Pivot (Max (P_ID) f_p_id, max (p_nm) f_p_nm, max (manu_date) f_manu_date for r in (1,2)

  and results

  Battle of reading

  http://www.orafaq.com/wiki/pivot

  Oracle Pivot examples

  11g - pivot.html

  ----

  Ramin Hashimzade