After you install demo of problem Adobe DC Pro... meets an unexpected failure. Running Win 7. Any ideas?

Similar Questions

• After you install an update to Adobe Flash, Firefox opens and remains black screen

  Firefox was working perfectly yesterday. When I started this morning, Adobe Flash Player was asked to run an update. I did it. Now, Firefox opens and stays black. I tried a reset safe mode and reinstall full. None worked

  Problem solved by disabling the hardware acceleration option in the advanced properties

• Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes

  Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes, there is an internet connection

  Good afternoon

  Thank you for your response. It was the right solution, but I missed something in your response. I had to start several times to download / update. Throw/delete (or the procedure of the description) files don't get past not like you described, but I tried something myself and it worked finally.

  But I have to ask: If this problem continues, of course, that a workaround is available, why is this a problem in the software persists, exist?

  Maybe you can't give answers, but I'm just wondering, well thanks for your help.

  Green eyes greeting

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat?

  How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat? I have a few other programs that need to use Adobe Reader showing 'photo' that are PDF files, and after the installation of Acrobat, it is Acrobat that opens automatically, with a message whenever Acrobat cannot be used for this and will be closed, and then the Player opens. I don't like having to see this message every time... Thank you! :-)

  Hi anne-grethea26777033,.

  You can do CD player as your default application by browsing in Edition > Preferences > under categories, select the "Général" and at the bottom of the window, you must select an option which reads "set as default PDF Manager" under the label of startup application and click OK.

  

  Let us know if that helps.

  Concerning

  Sarojini

• I have Adobe Acrobat 9 Standard on both of my computers.  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.  After you install Acrobat 9 special and differential treatment in the computer once,

  I have Adobe Acrobat 9 Standard on both of my computers.

  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.

  After you install Acrobat 9 special and differential treatment in the computer once, I wanted to update the update of the version 9.0.0 software to the same level as it was before the crash and that the other computer has version named 9.5.5.

  The update to version 9.0.0 system does not at all. 'There is no update' listed in the dialog box.

  Can you advise how to get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level it had before the accident.

  FTP://FTP.Adobe.com/pub/Adobe/Acrobat/Win/9.x/

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

  After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

  See this thread on the official Adobe feedback site: Lightroom CC 2015: objective metadata missing when importing field. Community customer Photoshop family

• I can't open the Acrobat Pro XI after you install with my serial number.

  I can't open the Acrobat Pro XI after you install with my serial number on 8 to win. My daughter has a report due tomorrow.

  Thanks Rick

  Hi Rick,

  Could if it you please let me know what happens when you click on the Acrobat icon to launch it for the first time.

  You get the error message? If Yes, then please let me know by sharing the screenshot of the same so that I can analyze the problem.

  You can try to uninstall and then reinstall Acrobat XI from the below mentioned link:

  Download Acrobat products | Standard, Pro | DC, XI, X

  In the activation window that appears, use your serial number to activate the software.

  Then, try to start again and check.

  Let me know how it goes.

  Kind regards

  Ana Maria

• After you install ios 10 in my ip6, not have menu triggers to wake you up

  After you install ios 10 in my ip6, don't have not menu lift to wake up if it is normal.

  < re-titled by host >

  Hey Sigitpramono,

  If I understand correctly, you have an iPhone 6 and do not see the stimulus to the Wake functionality.
  I recommend you read this article, it has more information on the requirements for features.
  
  

  Recovery in the morning works with iPhone 6s and later.

  Adjust the display settings on your iPhone, iPad or iPod touch - Apple Support

  Thank you for using communities of Apple Support. Have a good.

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?