Applicability of the OPA

Similar Questions

• that comes with the laptop activation key is not applicable to the type of windows installed

  Hello. I try to activate my windows with the product key that I saw at the back of my laptop but a habit of working because it says that its not applicable to the ultimate windows that is installed on my laptop... his view are rather than I run windows 7 all upward rather than windows 7 ultimate... I don't know how to do this. Help, please. Thanks :)

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Receive error message when adding the control of signature on the screens of the Interview with the OPA

  Hi team,

  We have an obligation to add electronic signature on multiple screens of interview.

  I tried to add the control of Signature in the form of the interview, but I get the error message below. We use the OPA 12.2 version November cloud.

  "Current data mapping settings do not support file attachments. File upload controls is no longer valid. (OPA-E00538)

  Thank you

  Vivek

  Yes. And make sure that you submit to a Service Cloud FileAttachments active or item by using a connection to the web service that supports attachments for the entities mapped on a.

• Download the OPA cloud policy template by using the command line

  Hi OPA developers,.

  Our project aims to automate the migration process models of political Test for Production environment. We use the OPA Cloud Aug2015, but if I understand correctly, we can enter the private cloud installation command-line tool and also run in the cloud.

  So, I downloaded the private cloud, edited the admin.cmd file to indicate download_project and provided the parameters and ran the command line.  However he just kept running and running for more than 15 minutes already, so I closed thinking that there is something wrong.  The zip file I download is only 800ko in size.

  Has anyone been able to use this feature from command line?  Please tell us what I have missed.  (Is there a specific place to save the file admin.cmd to ? Is it supposed to take a long time to complete)

  It comes to the command line, I used:

  " admin.cmd download_deployment - huburl = ' https://ProjectName.custhelp.com/OPA-hub "- hubuser ="HubLogin"- hubpass ="HubPassword"- deployname ="ProjectName"- version = 20 - deployzip="/projects/ProjectName.zip '

  Thank you very much!!

  You must run the admin.cmd from its original location in the private cloud installation bin directory, but you should immediately get an error if you run it from elsewhere.

  I'm not sure what you mean when you say you "edited the admin.cmd file to indicate download_project and provided the parameters" you should not have to modify this file, just run it with the required parameters as you describe.

  Can you watch the OPA hub management console and see if there is something in the log messages can indicate what could go wrong.

• Is there anyway to save the output of the OPA in XML if we use Oracle Web determinations

  Team,

  Can you please help on the scenario below.

  We use clouds OPA August version 12.2. We develop the application assistant job using determinations OPA Web to capture trade information and the information of the Agency cross.

  Instead of the page summary integrated OPA, we plan to create the PHP to capture from the OPA interview Assistant business page.

  Is there a way to capture the output of the OPA in XML format to send it to the contents of PHP page?

  If someone falls on this scenario, please share your entries with small example.

  Appreciate your help.

  Thank you

  Vivek

  Managers of custom control are documented here library of Documentation Oracle policy Automation.

  The Manager of your custom control will get an HTTP POST request with several parameters which will be takeover-session. The value of this parameter is a URL string coded something like this:

  opa-session=%3C%3Fxml+version%3D%221.0%22+%3F%3E%3Csession-data+xmlns%3D%22http%3A%2F%2Foracle.com%2Fdeterminations%2Fengine%2Fsessiondata%2F10.2%22%3E%3Centity+id%3D%22global%22%3E%3Cinstance+id%3D%22global%22%3E%3Cattribute+id%3D%22nearest_city%22+type%3D%22text%22+inferred%3D%22false%22%3E%3Cunknown-val%2F%3E%3C%2Fattribute%3E%3Cattribute+id%3D%22gps_coords%22+type%3D%22text%22+inferred%3D%22false%22%3E%3Cunknown-val%2F%3E%3C%2Fattribute%3E%3Cattribute+id%3D%22number_vehicles%22+type%3D%22text%22+inferred%3D%22false%22%3E%3Cunknown-val%2F%3E%3C%2Fattribute%3E%3C%2Finstance%3E%3C%2Fentity%3E%3C%2Fsession-data%3E

  and when decoded will be:

  http://Oracle.com/determinations/engine/sessiondata/10.2">

  You can analyze using some PHP for the analysis of the structures of XML.

• More quick REST API / JSON approaches to the interviews of the OPA?

  I recognize there are services / libraries that can convert an OPA Web Service deployment on the hub to a JSON / REST API.  (Examples: Mashape I used for the other REMAINS in the SOAP proxy).

  But, is there a consensus on the more common approach / best to this operation?  Is there an approach that may be more in line with the future development of the OPA hub around REST API?  I think I saw something with Oracle Cloud Computing Mobile Service, but I cannot find enough documentation to the CEP with.

  It occurs to me, that instead of researching the topic for an hour or more, I could have benefits more ask on the forum.

  Thank you

  Paul, my quick view is that whatever you do will be OK, because even once we add REST API, existing SOAP API will remain for backward compatibility reasons.

  It would also be impossible to build compatibility for something we have not designed yet, so I can't really all guide on what to do / avoid in order to simplify any possible future transition official rest API.

  Davin.

• Loops rule in the clouds of the OPA

  Hi OPA developers,.

  We currently use the OPA Cloud (may 2015) for the requirements on annual sales.  Unfortunately found an error of loop rule to requirements such as:

  * an e balance at beginning of the yearmust be equal to its previous year-end balance less pension his previous year of

  * but a balance end of year is equal to balance at the beginning of the year more value temp of the year

  The year is an entity.  Balance of year and end of year sale run loop in a debugger because even if we refer to the previous year, he always uses the same entity instance attribute.  Loop rule is not supported in the cloud (as opposed to how we can configure the properties of the rule in the version on site).

  Please let know us if you have a work around to do this.  The only alternative we have is to turn them into global attributes and enter the number of the year in the name, such as the balance of the year 2nd = 1st year sale - 1 year temp value, balance of 3 year = 2nd year balance - 2nd year temp value, etc.  But then, it is instances of entity year 100 x each attribute start and end loop so it will be a very large document/s for us to create and to business users to maintain.

  If all goes well there is something we can use entity and relationship functions... but always try to figure out how to do.  Any help is very appreciated!

  Thank you!

  Unfortunately there is no support for rule lines in the version of may 2015.  We are looking for by adding back to a later version.

  I'm guessing that your example is simplified, but you wrote it you don't need a loop of rule to solve.  The final value is just:

  InstanceSum (years, value temp of the year) - InstanceSum (the years, pension year of)

• Integration of the OPA 10.4 with Oracle E-business Suite

  We have a requirement for the integration of the OPA 10.4 with Oracle E - business suite.

  The condition is hypocritical:

  (1) EBS can call rules of the takeover bid on any screen - I think that this will be achieved by Oracle determinations Server (ODS) with probably a middleware between both to facilitate the exchange of webservice.

  Request- I just wanted to know if there is another way to better or if it is only best option?

  Are there examples of projects or pointers that can help us get a better understanding of the present?

  (2) given certain conditions of release in EBS, the modules of the OPA may be invoked, but this time there may be a few involved OPA interview screens.

  Request- How to proceed and achieve this goal?

  Any help on the above queries is really appreciated.

  (1) it is for an older version of OPA, but you might find something useful in this tutorial.

  (2) launch a browser window in passing a single parameter "caseid" to OPA startsession URL, so that a data adapter that you write can load and save data interviews of EBS based on the id of the object.

• How to activate the Mobile in the hub of the OPA

  Hello

  Private cloud 12.1 of the OPA of just downloaded and installed.  Want to test mobile features interviews, but it seems that it is not possible by default to allow interviews or compatible mobile users.  Is this something that needs to be configured, or is this feature not available immediately?

  Thank you

  Faraz

  Hi Faraz,

  If you go to your MySQL database and find the config_property table, you will find a field that will allow mobile, feature_mobile_enabled. The default value is set to off (0) so just it set to 1, then you should get the option of mobile use in the hub of 12.1.

  Kind regards

  Evert

• How can we make invisible static value in a text field to the OPA

  Hi all

  I have invisible static value in a text field in the OPA.

  For ex: field contains the value 100 while we manage the maintenance should not display the value 100 or make us the text as invisible field. whenever we submit the interview the value should be passed.

  I made the background color of the text in white field, but it reflects all the text fields. I need to make the text of the particular text as invisible field. Can someone give me a solution for it.

  Use two different attributes (the one that is indicated in the interview to the need - for example, as "the id selected user" or whatever the phrase is appropriate) and a different attribute, which is the mapped attribute.  The second attribute must not be on any screen of the interview (by thus "invisible" for the user).  Write a table of rules that concludes that the value of the attribute mapped on is EITHER static value or the selected/expected value according to some logic is appropriate to make a decision in your model of strategy.

• What is the meaning of the OPA session tables in Siebel for OPA? That is to say why they were created when they should be used? and what was the first thought behind the creation of tables of session?

  Hi all

  I wanted to know best practices regarding the use of the tables of session OPA? that is, what was the initial logic of creating tables of session? where we should use them and why? also can you please argue for and against about two approaches mentioned below

  Method 1: Save and reterieve OPA session data tables using session ID and case ID?

  Approach 2: Save data in Siebel database tables and just use reterieve case Id Siebel data and save the back.

  Thanks for your replies.

  Session tables are there to allow easy storage of the results of an interview of the OPA. It can be used to extract data from an interview, but probably more useful as an archive of past interviews. Is it possible to load a previous interview in the determinations of the Web from this table.

  1. This can be very useful to resume a partially completed interview.

  2. it can be used as verification of de facto mechanism to see what has been entered in an interview.

  In general I prefer to approach 2 where there are intercepted the incoming data to an interview in a before handler registration and then save the data you need from the interview in the location that you must save it.

• Ability of the accessibility of the OPA

  Hello

  The OPA project I am working on needs to be the Government of the Canada web standards, this includes the accessibility requirements for the blind etc (standard of the Web of the Government of Canada - the Canada Treasury Board Secretariat)

  Does anyone know if the OPA is compatible with assistive technologies for people with disabilities? such a screen readers, etc. ?

  Thank you!

  Heather

  Hi Heather

  Yes. Take a look at accessibility information product here:

  Status of product (sheets VPAT) for Siebel Applications

  (scroll down to view the Scriptures Oracle policy Automation)

  Hope that has the info you need,

  Fiona

• What does the message "settings on this page are not applicable to the Chrome or chrome based browsers (PPAPI)." mean, and that's the reason why I can't play games on Adobe Flash Player?

  I'm playing the crazy Kingdom of God on Adobe Flash Player but the "settings on this page are not applicable to the Chrome or chrome based browsers (PPAPI)." message when I go to global settings to try to resolve the problem. This has something to do with my problem for the Kingdom of the mad God does not?

  Hi Jess.C.N,

  Chrome uses the PPAPI plugin and the settings are managed using the online settings manager, not the local settings manager.  Click the 'Learn more about Configuration of Flash Player with Chromium-based browsers' to learn how to manage these settings for the plugin PPAPI browsers.  You can also go to Adobe - Flash Player: settings - Global Privacy Settings Panel Manager to manage the settings of PPAPI according to the browsers.

  --

  Maria

• Not applicable to the ESX version under 4.1 Patch 3

  Greetings,

  I've just deployed vShield Endpoint and configured, connected to the vCenter, etc.. I'm running 5.1 and when I go to install endpoint on the host, I get: not applicable to the ESX version under 4.1 Patch 3

  

  Thoughts?

  Hello

  There is a KB with a similar error message: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2007082

  Also, check out this previous thread: https://communities.vmware.com/message/2265622

  Let us know if your problem is resolved...

• The OPA Web services return no values

  I tried to get the OPA web services to provide a decisive result, but it seems as if my values are not received correctly. I reduced my application to simple terms to see if I can get anything to come back, and maybe to see if someone can point out what is happening, or what Miss me.  The following transactions should bounce at least values, correct?

  Credits:

  Request:

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/"xmlns:typ ="http://oracle.com/determinations/server/10.4/rulebase/assess/types">" "

  < soapenv:Header / >

  < soapenv:Body >

  < type: evaluate request >

  < type: global instance >

  < typ:attribute id = "applicationClass' type = 'text' deducted ="false"result-style ="single value"unknown-result-style ="single value"known-result-style ="single value">

  < typ:text - val > A < / typ:text - val > < / typ:attribute >

  < / typ: global instance >

  < / typ: evaluate request >

  < / soapenv:Body >

  < / soapenv:Envelope >

  Answer:

  "" < SOAP - ENV:Envelope xmlns:SOAP - ENV = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:i18n ="http://www.w3.org/2005/09/ws-i18n" xmlns:typ = "http://oracle.com/determinations/server/10.4/rulebase/assess/types" >. "

  < SOAP - ENV:Header >

  < i18n:international >

  en_US < i18n: local > < / i18n: local >

  < i18n:tz > GMT-0400 < / i18n:tz >

  < / i18n:international >

  < / SOAP - ENV:Header >

  < SOAP - ENV:Body >

  < type: assessment / response >

  < type: global instance >

  < typ:attribute id = "applicationClass' type = 'text' deducted ="false">

  < typ:unknown - val / >

  < / typ:attribute >

  < / typ: global instance >

  < / typ: assess / answer >

  < / SOAP - ENV:Body >

  < / SOAP - ENV:Envelope >

  Specific:

  Request:

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/"xmlns:typ ="http://oracle.com/determinations/server/10.4/DriverRoadtestEligibility_Excel/assess/types">" "

  < soapenv:Header / >

  < soapenv:Body >

  < type: evaluate request >

  < type: global instance >

  <! - you can enter the following 37 items in any order-->

  < typ:applicationClass type = "text" deducted = "false" result-style = "single value" unknown-result-style = "single value" known-result-style = "single value" >

  < typ:text - val > A < / typ:text - val >

  < / typ:applicationClass >

  < / typ: global instance >

  < / typ: evaluate request >

  < / soapenv:Body >

  < / soapenv:Envelope >

  Answer:

  "" < SOAP - ENV:Envelope xmlns:SOAP - ENV = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:i18n ="http://www.w3.org/2005/09/ws-i18n" xmlns:typ = "http://oracle.com/determinations/server/10.4/DriverRoadtestEligibility_Excel/assess/types" >. "

  < SOAP - ENV:Header >

  < i18n:international >

  en_US < i18n: local > < / i18n: local >

  < i18n:tz > GMT-0400 < / i18n:tz >

  < / i18n:international >

  < / SOAP - ENV:Header >

  < SOAP - ENV:Body >

  < type: assessment / response >

  < type: global instance >

  < typ:applicationClass type = "text" deducted = "false" >

  < typ:unknown - val / >

  < / typ:applicationClass >

  < / typ: global instance >

  < / typ: assess / answer >

  < / SOAP - ENV:Body >

  < / SOAP - ENV:Envelope >

  Thank you

  It's very strange sound. It might be a problem caused by unnecessary attributes sent in the query. Try the following (generic example application).

  http://schemas.xmlsoap.org/SOAP/envelope/"xmlns:typ ="http://oracle.com/determinations/server/10.4/rulebase/assess/types">."

  A

  This application is the most correct for the following reasons:

  • You should not set the attributes type and deducted . These attributes are usually returned in the response and cannot be defined by the application.
  • You should not set the style of the result of an attribute that you provide the value of. It must always be returned in the response.

  That said, these points do not explain why the applicationClass value is returned as unknown. Perhaps the additional attributes in the query is triggering some bad server behavior of determinations which is the cause not to define the attribute.

  This regulation, if any, that you have associated with modules? You have any customization of the server determination or modules?