Apply a mask or something to an image with a white backgroung.

Similar Questions

• How to create a vector from an image with a white line

  I need help as soon as possible.

  I have a design that I made in Photoshop CC 2014 and I need to make a vector. I was told the best way to proceed was to file in Illustrator CC 2014, which is what I have, but every guide I followed takes off the white line that goes around the text and extends beyond the tree. I need this white one to be there and it's so frustrating that I can't find a guide that will help me keep it there!

  Please, if anyone has the solution, please describe in DETAIL. , I have included the image, I work for example. I put a background black on it so you can see the white line which must remain outside the vehicle. The black background will not be outside the final vector.

  Matt,

  According to me, you can do the following:

  Come back to Photoshop and create black background like a rectangle, then the raster work is separated into two:

  The one with the red/white text on black background and the other with the tree on black background.

  Image then trace each and expand each track and then line them up by the outermost paths (tracing the outside shape of the black rectangles that must be identical).

  Then take it from there, with full marks.

• In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?

  In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?

  Too bad...

  Fixed:

  adjustment of projects > switch Renderer.

  Thank you

• Masking an image with a shape from Keynote for the iPad?

  I am actually writing an article in support for a Web site and it does not seem you can mask an image with a shape from Keynote for iPad - something that is incredibly easy to do in the version of OS X. Clues on how to achieve this in the iOS version of Keynote?

  Thank you.

  Nevermind, I found the answer - all we need to do is add the image AND form of the slide, then select both at the same time. One of the choices that is displayed in the context menu is "mask with shape.

• When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind

  When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind it does not move. I did this project of class before and it worked fine so I'm not sure if I have something started or... Any thoughts?

  I thought about it. That's all just stupid on my part and a bit of frustration because photoshop is my sworn enemy of then adobe added in. Thanks tho!

• side is applied to ALL, not only the active image - please help.

  Seemingly out of nowhere a particular feature in LR ceased to behave the way she normally does it for me.

  When I'm in the notice of inquiry (in library mode) and I have a number of images selected because I'm doing my selections, it suddenly started apply my star rating for all 10 images, I chose and not only the one that is active . It's very strange - I've never seen behave like this before. I don't remember hitting something or change any settings, but he just seemed to have started from nowhere.

  It seems that if I 'manually' click on the star scale that appears when you mouse over below each image, THEN it will apply to the star to just an image, but I can just is more hit the '5' - key and have just an image which is active get 5 stars. He does it at all.

  I tried just to restart LR, but which has not changed anything. Please please help as this is really mess up my workflow.

  Thank you

  Robyn

  I visited the next page to confirm that it should indeed not be behave in this way:

  http://help.Adobe.com/en_US/Lightroom/using/WSEEE8FD0F-DFD8-47D0-A6FE-DD726E5F2E1A.html#ws 11A1E98C-3D8D-47b5-8335-4B9D8C3A5D36

  It is in the middle of your list on your screenshot, but you two select two files to make it active, so you can clear the check box.

• How to re - apply a mask after changing the alpha channel?

  Hello

  I am writing a plugin that modifies the alpha channel of the layer.

  My problem is I want the mask effect to apply after my own effect.

  For example, I found a few pixels that were originally invisible (their original alpha is 0 and I put it to the maximum), but I don't want to reveal the pixels that are killed by the mask.

  I tried to use PF_MaskWorldWithPath, but how do I find the values that are used for the feather and opacity?

  It seems possible to find them using AEGP_GetNewMaskStream, but I could not find any description of how to interpret the results, not to mention that it's very complicated to get all the handles that are required to use this feature because my plugin is not CEAP.

  And on top of that, it doesn't seem to be a way to simulate the extension mask feature.

  No idea how that was possible?

  Thanks in advance!

  My friend

  you have stumbled upon something large and problematic.

  Let's start the bad news:

  You can not PF_MaskWorldWithPath make the expansion of mask for you.

  It doesn't have this entry. to re-create a master expanded, you will need to make this mask on your own.

  given there is no extension on one of the masks, you could use PF_MaskWorldWithPath on each mask and composite in transfer mode right on top of the other.

  finding the original matte for the layer masks.

  Yes, it's an awkward process, but it's the only way to use the mask data for a cache.

  to read the pen, opacity, all other values of the mask, you use AEGP_GetNewMaskStream or AEGP_GetNewMaskOpacity (I don't know what functions separated for the opacity).

  and then AEGP_GetNewStreamValue to access the actual numeric value.

  There is another method, you can use, which is not perfect, but much easier to use.

  get you initial pixel in the layer using a hidden layer param and PF_CHECKOUT_PARAM (or checkout_layer for smartFX).

  compare these original pixels (which have no masks applied) to pixels in entry of the effect (with masks applied to them).

  the difference between the two alpha is (for the most part) the matte of the masks.

  assuming that your effect is first in the stack (or the first affecting the alpha), you should get one if bad no solution that would allow you to save a world of hurt.

  trying to recreate precisely the masks.

  There are even more complicated shapes, involving layers dummy and artificial effects, but it sems to me as if he didn't miss the point.

  I hope this has helped.

  :-)

• When I search something and click the Web site in the search results, I get nothing and the tab says something like "nclk (Image GIF 1 x 1 pixel)" what should I do to display the Web page?

  I just switch to Firefox this morning, but I used it in the past. I set Yahoo as my homepage, and it opens fine when I start Firefox but if I type something in the search bar, such as Wal-Mart or ebay it will display the search results, but when I click on the page I want to open, I get something like "nclk (Image GIF 1 x 1 pixel)" on any of the Web pages I have to choose. If I put www.walmart.com in the address bar, it works fine. What should I do?

  Using Kaspersky? This error is usually caused by a parameter in Kaspersky. In the Kaspersky Firewall section, under filter turn off the blocker of banner advertising (may be called anti-banner).

• Identify and apply the mask by LVR or RVlA

  Hello everyone, I can't modify this code. It applies a mask by a selection ("LVR"), but if you don't have a choice, it displays an error.

  I need that if there is no selection, then it creates an empty mask ("RVlA"). Can not understand how to make this "if / else".

  cTID = function(s) { return app.charIDToTypeID(s); };
  sTID = function(s) { return app.stringIDToTypeID(s); };
  
  
  function Temp() {
  
    function step1(enabled, withDialog) {
      if (enabled != undefined && !enabled)
        return;
      var dialogMode = (withDialog ? DialogModes.ALL : DialogModes.NO);
      var desc1 = new ActionDescriptor();
      desc1.putClass(cTID('Nw  '), cTID('Chnl'));
      var ref1 = new ActionReference();
      ref1.putEnumerated(cTID('Chnl'), cTID('Chnl'), cTID('Msk '));
      desc1.putReference(cTID('At  '), ref1);
      desc1.putEnumerated(cTID('Usng'), cTID('UsrM'), cTID('RvlS'));
      executeAction(cTID('Mk  '), desc1, dialogMode.NO);
    };
  
    
    step1(); 
  };
  Temp.main = function () {
    Temp();
  };
  
  Temp.main();
  
  

  Finally I got it! I'm a bad programmer, but help adobe is as bad as

  	cTID = function (s) {return app.charIDToTypeID (s) ;};}
  	sTID = function (s) {return app.stringIDToTypeID (s) ;};}

  	function Temp() {}

  	Southeastern var = ("LVR");
  	var Selnes = ("RvlA");

  	function step1 (withDialog, doc) {}
  	if(doc == undefined) doc = activeDocument;
  	var = doc.activeHistoryState;
  	doc. Selection.Deselect ();

  	var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);
  	var desc1 = new ActionDescriptor();
  	DESC1.putClass (cTID ('Nw'), cTID ('one'));
  	var ref1 = new ActionReference();
  	Ref1.putEnumerated (cTID ('one'), ('one') cTID, cTID ('Msk'));
  	DESC1.putReference (cTID ('At'), ref1);

  	If (as! = doc.activeHistoryState) {}
  	DESC1.putEnumerated (cTID ('Usng'), ('UsrM') cTID, cTID (SelY));
  	doc.activeHistoryState = have;
  	}
  	else {}
  	DESC1.putEnumerated (cTID ('Usng'), ('UsrM') cTID, cTID (Selnes));
  	}

  	executeAction (desc1 cTID ('Mk'), dialogMode.NO);
  	};
  	Step1();
  	};
  	Temp.main = function () {}
  	Temp();
  	};
  	Temp.main ();

• development module when I change something with correction of the area I can't move to the next image with the right arrow key

  Hello

  I work with the module development and when I change something with correction of the area I can't move to the next image with the right arrow.

  Is there a solution?

  Norbert

  I think that Yes you are talking about "Spot healing.

  So once you have used the tool, please click "Fertig" at the bottom right of the image.

  Try, and then use the arrow keys.

• How to crop an image with a mask clip using a circle instead of a rectangle?

  I looked at the Adobe TV Illustrator tutorial on the cropping of the image with a clipping mask. In the video, the presenter uses the rectangle tool with the clipping mask and mentions that the shape of circle or vector could be used, but I can't understand how to get the circle.

  http://TV.Adobe.com/watch/learn-Illustrator-CS6/cropping-images-with-clipping-masks/

  I am new to Illustrator and need step by step instructions!

  Thank you!

  Here's how to make a mask for clipping in illustrator, tutorial

• Apply a mask

  I want to use the preset 'Numbers' / effect to create a counter in After Effects. There is no problem.

  But when I draw a mask on a part of the meter, it is not hide anything? Help

  Said Mathias - pre dial or use a second (solid) layer to which you apply the mask as a matte for your effect of numbers.

  Mylenium

• How to apply in the world of shadows to images, but not the frames in CS5?

  Hi, I produce a catalog and want to have the possibility to apply a drop shadow to the image of each product. The images are all placed .psd files.

  I have the images with an object style for the editing of the image etc-, but when I try and apply a shadow in the same style, he adds a shadow to the image and race around the edge of the frame?

  Help!

  Yes, if you are framing mounting options there will be a resize.

  There is one thing that seems pretty cool. You can drag and drop the symbol FX from the effects to the image Panel, and if the FX style is applied to the image she also gets appied to the graph in the framework you drag and drop to. That could speed things up if you want to do in InDesign.

  AND you can do it too with Object Styles - if you drag and drop on executives.

  But here's the thing - a framework for the drop shadow for each image is probably unlikely in InDesign, if you have smaller pictures so the shadow effect is larger, and becomes the largest image over the shadow effect.

  In order to have a universal style for all Drop Shadows is unlikely to work - if you catch my drift? Unless all products are also of size or of a similar size?

  The other thing is that InDesign sorta make sense. It has always been a framework for space and an Image or a text is placed in a placeholder. The frame and the Image/text are therefore two separate components.

  It's just a pity there's no "graphics of find/replace' or a 'Panel of graphic Style.

  It is certainly interesting - and you should put it forward as a feature request

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  I don't know why "Graph" is not an option in the effects Panel, without having picked?

• How can I import an image with transparent background .png in the Vision Assistant?

  Hello

  I am using the Vision Assistant of NOR. Here, I want to overlay one existing image with another. Therefore, I use the overlay Installer where can I import a .png image. If I do, I don't get

  the transparent background of the back of the image, even, I was saved with a transparent background. The image is displayed with an orange background.

  If I import the same image to any front panel for example, I see the picture on the right path with a transparent background. What I've done wrong? I have attached the image I want to use.

  Thank you

  Hello! Don't know how to do this in the Vision Assistant. Try to use the overlay (bitmap) or convert your image into mask. Effect of transparency not supported in the Vision. What you can do in LabVIEW is something like this:

  

  

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".