ATG-short - is there a way to talk to each other the cartridge of managers?

Similar Questions

• I changed my password to get into my phone and I don't remember, I can get by using the contact ID, but I don't remember the password. Is there a way to change this without typing the former in?

  I changed my password to get into my phone and I don't remember, I can get by using the contact ID, but I don't remember the password. Is there a way to change this without typing the former in?

  N ° you'll need to restore your iPhone:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I lost the product key for Windows XP. I want to reinstall the operating system on my computer. Is there a way by which I can regenerate the key?

  How to regenerate XP product key

  I lost the product key for Windows XP. I want to reinstall the operating system on my computer. I have the CD and the product has been registered with Microsoft. Is there a way by which I can regenerate the key.

  http://www.magicaljellybean.com/KeyFinder/

  Tricky

• I backed up my files and then did a reinstall. Watch winmail.fol backup but not the eml files. Is there a way to retrieve my emails via the winmail.fol files?

  I backed up my files and then did a reinstall. Watch winmail.fol backup but not the eml files. Is there a way to retrieve my emails via the winmail.fol files?

  Hello

  ·          What program did you use to back up files?

  Here are two ways to restore the saved messages:

  Step 1: Before you start Windows Mail, copy the folder saved in C:\Users\username\AppData\Local\Microsoft\Windows mail storage folder.

  Step 2: Start Windows Mail and import messages in the backup storage folder.

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-messages-to-Windows-mail-from-other-e-mail-programs

• Is blackBerry smartphones there a way to delete an icon on the desktop?

  Is there a way to delete an icon on the desktop. I have downloaded twice and I would like to remove one. I know you can hide but how about withdrawal? 1st post here and love my curve!

  Thxs for all help you!

  Hello

  Go to the ADVANCED OPTIONS OPTIONS APPLICATIONS highlight Crackberry MENU KEY DELETE.

  Turn off the phone and turn it back on.

  Please do not hesitate to request information of morre,.

  If this answers your question please solve the message using the green check mark in the post that answered your question.

  Thank you

• Hi so I bought photoshop elements 14 but I got the version of windows and I'm on mac, so is there a way I can just switch to the mac version? I don't want to buy it twice obviously

  Hi so I bought photoshop elements 14 but I got the version of windows and I'm on mac, so is there a way I can just switch to the mac version? I'm too lazy buy twice of course.

  No need to buy again, you can exchange the product for the Mac platform.

  Exchange a product Adobe of a different version of the language or platform

• Is there a way to re set Lightroom to the original settings, I've been playing with it and got somewhere that I don't know how to get out of... not particularly computer savvu

  Is there a way to re set Lightroom to the original settings, I was playing with it and has gotten, somewhere, I don't know how to get out of. Not very computer savvy

  For starters, stop Lightroom

  On Windows, do the following

  Click the Windows Start button and in the search box type: -.

  %AppData%\adobe\lightroom

  Then press Return\Enter

  This will take you to the folder Lightroom (see image below)

  Select the Preferences folder and click on delete to send it to the Recycle Bin.

  Close the Lightroom folder, and re-start the Lightroom program.

  

• Is there a way for EA to automatically save the audio files in the project and publish directories & json?

  Is there a way for EA to automatically save the audio files in the project and publish directories & json? Thank you

  Bob

  good edge would not copy all the external files that you have added to your project in the publication of record, you should only do copy paste your files and folders created by your self after publication!

  and I can not undrestand "Unlike you, I'm not that qualified and often make mistakes that make some of my totally useless code retries." You can save your project every time with the new name to have your previews works!

  and on the withdrawal of your symbols that uses the name of the class, you're hurting, you should do it this way

  SYM $(".) Preview"). Remove();

  and that's why you can not make it work

  If tehre is any question feel free to ask me questions

  Zaxist

• With the help of Adobe Acrobat Pro XI: is there a way to select existing text / change the font color of this

  With the help of Adobe Acrobat XI Pro Trial Version: is there a way to select existing text / change the font color of the text?  (there are here - but where is it to XI pro?)

  I have been using Acrobat 8 Pro & it's very simple, but I was not able to do using Pro XI!

  1. Open the PDF file
  2. Click on the Tools Menu
  3. Click the editing of content
  4. Choose text & Images

  They wanted to make it easier to get.

• Is there a way to display animations embedded in the timeline?

  I made an animation that is nested in a clip, but it appears not on a frame-by-frame in the scenario... is there a way to make it appear in the scenario?

  I need to take a picture of my screen with each picture on it for a project of animation stop motion for the school... I tried to export a series of still images as a solution, but for some reason that nested animation data also fails to appear in any type of export of the film.

  Does anyone have any suggestions?

  Create animation as a graphic symbol and extend along the timeline for the number of images there.  When you move along the timeline with the cleaning brush, you should see the images to animation.

• Is there a way to combine their results of the query in a single function

  I have a bunch of functions that return a query:
  
  < cffunction = access "getDeals" name = "remote" returntype = "query" >
  < cffunction = access "getDeals2" name = "remote" returntype = "query" >
  
  is there a way to combine their results of the query in a single function that returns a structure of different results?
  
  

  Uh, it is probably more suited to a table - effectively turning it into a list of queries. Then you loop the array and each output.

  I use a similar approach in the creation of the system of the user messages. Most of my functions that are called do their part, then at the end call another function, I called 'messages '. This function takes all what my function sends and adds it to a message board.

  Keeps me out of a long list of messages - because I could call several functions at the same time. If I have just the output of a message of each function, each would crush the other. So, I'd get one message at a time.

  Immediately after that he was released, I will destroy it then the message table so that messages are not kept inside.

  Mikey.

• Cannot get 2 nodes VM talk to each other on OEL7

  Greetings-

  I intend to install RAC 11 GR 2 on OEL7. I got the Oracle VM operational machines. I can access the internet successfully without any problems. If I'm on the node-1 and ping its IP address, it also works very well.
  But when I try to do a ping of virsa node-1 node-2 and vice, I get the message cannot.

  Here is my configuration of hots of installation:

  [oracle@racdev01 Desktop] $ cat/etc/hosts

  Loopback #.

  127.0.0.1 localhost.localdomain localhost

  # Public

  192.168.56.71 racdev01.localdomain racdev01

  192.168.56.72 racdev02.localdomain racdev02

  # Private

  192.168.10.1 racdev01 - priv.localdomain racdev01-priv

  192.168.10.2 racdev02 - priv.localdomain racdev02-priv

  # Virtual

  192.168.56.81 racdev01 - vip.localdomain racdev01-vip

  192.168.56.82 racdev02 - vip.localdomain racdev02-vip

  # SCAN

  192.168.56.91 rac - scan.localdomain rac-scan

  192.168.56.92 rac - scan.localdomain rac-scan

  192.168.56.93 rac - scan.localdomain rac-scan

  Rattling, public and private maintains for lack of node-1 node-2 IPs and vice versa:
  $ ping racdev02
  $ ping racdev02-priv

  
  

  > > My network:
  Node-1: Ethernet (enpOs8) = > 192.168.56.71 (public)
  Node-1: Ethernet (enpOs9) = > 192.168.10.1 (private)
  
  

  Node-2: Ethernet (enpOs8) = > 192.168.56.72 (public)

  Node-2: Ethernet (enpOs9) = > 192.168.10.2 (private)

  
  

  This is the configuration for my 3 adapters:
  

  

  
  I tried for days to get these 2 nodes to talk with each other. I would really appreciate your help to solve this problem... I can't installing RAC, unless I get these machines talk to each other...
  
  Thank you very much!

  @AJ

  First of all, thanks to you all for the heads up, I tried your suggestions, which was a good experience of troubleshooting since I am just a DBA not a network Admin however, I solved the problem and I share the solution below.

  Initially after a successful installation of OEL7 on Node1, I did not perform a fresh install of OS OEL7 on Node2, instead, I took the short cut by saving Node1 via VM - Box > file > Export device and then reimported into a new host name & configured network connections accordingly. But, since a clone of Node1, Node2 machines will have the same MAC address and so they may never talk to each other because I understand is the address MAC is what distinguishes them from material level.  Now, you should have a good idea what is my problem...

  There is a quick fix & fix liked - the longer fix would have been to install a new OEL7 on Node2, the miracle solution is below which I was working with success:

  1 I changed my MAC address last 2 digits for all 3 node-2 and make unique cards and not the same addresses MAC on Node1 because they were copied from Node1.

  2. to: VM - Box > settings > network > adapter 1 > advanced > change the 2 digits of the MAC address here also with the same 2 numbers I did on step 1

  3 step 2 apply for Adapter 2 and 3 of the adapter, but make sure you use the same last 2 numbers you did on step 1 for Adapter 2 and 3 of the adapter

  Exp: 1 MAC adapter: 08:00:27:96:72: 85 -adapter 2 MAC: 08:00:27:96:72:86 - 3 MAC adapter: 08:00:27:96:72:87 > Note: they must all be unique and different from MAC @ on Node1

  4 on Node2 > Terminal > cd sysconfig / > , you should see, in my view, enp0s3, 8 and 9 may be different numbers according to your configuration. But once you change each of them, you should see a setting called [HWADDR] Exp: mine was: HWADDR = 08:00:27:96:72:84 - then I changed to the same number, I put it in step 1 above - to: HWADDR = 08:00:27:96:72:85.  Apply the same changes &

  5 restart services network as follows: service network restart - may have to restart...

  6 if everything is done correctly above, you should be able to ping both machines of vice versa - I could

  7 nothing succeeds like success! It took me 2 days to understand this point, but it was worth. I learned so much by testing a few things around. The other way is to perform a new installation of OEL7 on Node2, modify the connections accordingly and you don't need to mess with MAC address at all...

  I'll be happy to set up a small video or post screenshots so you can see it working.

  Please note, I've looked all over youtube BOF CARS on OEL7, most 2 knots BECAUSE I fell on were on OEL6.5 and below. I've seen some autonomous 12 c on OEL7, but no 12 c CARS on OEL7. If there are out there, please post the link. Now, I had 2 machines to talk to each other, I will perform with installation 12 c CARS on OEL7.

  See you soon

  @AJ

• Can Photoshop and InDesign talk to each other?

  I work on a document in InDesign, you use an image that I have edited in Photoshop. Is there a way I can make changes to the image of PS and make them appear in ID, without having to place the image again?

  To change the image of InDesign, you right click on the placed image and choose to "Edit original". It will open in Photoshop. When you save or close the image in Photoshop, it will automatically update in the InDesign document.

  If you change the image without interaction InDesign (going directly in the file system), you can easily update the link in the links of InDesign Panel. Obsolete links will be a yellow warning icon.

• With Movieclips talk to each other

  Hi all.

  I can't try to have a video clip to talk to each other. Essentially, I nested within a movieclip buttons. I want to do is have it such that when one of these buttons is activated, it tells an another movieclip I have on the stage to move to a certain range.

  So currently I have two clips on the stage - navStart and navArrow. I have a navStart button that reads:

  function goMoviesArrow(Event:MouseEvent):void {}
  gotoAndStop (1);
  navArrow.gotoAndStop ("movies")
  }

  Now when I click on the button I get an error message that there is an access of undefined property navArrow. I understand why this is... it is because in the movieclip navStart... There is no such thing as navArrow. So, how can I say that it resembles navArrow who is back on the main stage. I tried things like:

  parent.navArrow.gotoAndStop ("movies")

  and

  stage.navArrow.gotoAndStop ("movies")

  but in vain.

  So, how can I get these movieclips to talk with each other?

  The zip file is attached...

  Try:

  MovieClip (this.parent).navArrow.gotoAndStop ("movies")

• How to get 2 vm talk to each other?

  Guys,

  I'm on a 64 bit Windows 7 machine.  I have VMWare Workstation 7.1.4 and I try to get 2 Windows 7 64 bit VM to talk to each other without network connectivity.  At present, we have setup the network adapter for the two virtual machines as host only, and also two Windows firewalls are disabled.

  We put the IP (192.168.1.1 and 192.168.1.2) manual on both.  We connected to both and tried to do a ping to another, but it times out.

  What do we lack?

  TIA!

  In order to do a ping, let the firewall is turned on in the Win7 guests and allow ICMP traffic in the advanced settings in their firewall settings.

  André