Blades appears in the table of contents

Similar Questions

• Manual large editions with sensitive html setting. Is there a way to determine how the entries appear in the table of contents?

  I publish major textbooks with sensitive html setting. Is there a way to determine how the entries appear in the table of contents? If I publish a small section of the manual then 2nd level entries appear as eruptions under the chapter name, but if I publish the manual in its entirety then level 2 headings are not at all. I would like them to appear as the eruptions in the table of contents, but I need to publish the manual as a whole in order to keep the cross references. Any help will be greatly appreciated!

  I think that this would make clearer - and it would skip and tables of contents of books under.

• How can I tell what appears in the Table of contents

  I'm under InDesign CC 20141 Release on a Windows 7 PC.

  In my paper, I define a character style called "product header. I wish that all the elements with this style of character "product header" to appear in my Table of contents.

  However, the Table of contents group wants to determine which paragraph styles to include.

  How can I "connect" my style of character to appear in the Table of contents.

  Thank you very much!

  Steve

  OK - figured out - I have to use paragraph styles. I swear that this was not the case in a previous version of InDesign.

• Topics and new books do not appear in the table of contents after generated in DHTML (RoboHelp v8)

  Until recently, when I tried to add a topic for a book in the Table of contents, I just dragged into the project manager in the Table of contents.  I don't know what is different today, but the new entries appear in the Table of contents pod but not in the generated DHTML.  To make it more confusing, to me anyway, some newly added topics show.

  

  Hello

  I don't think 'huge' search and replace that can affect things. But we need to check a few things first.

  When you look at the SSL recipe, using any type of a conditional build Expression? If so, perhaps you have tagged content and it is not for this reason.

  See you soon... Rick

• Chapter numbers will appear in the table of contents with page numbers...

  First of all, thank you all so much for the display of the answers.  This forum is wonderful.

  I have a doc that needs to have chapter numbers appear with the page numbers in the table of contents.

  I insert the < $chapnum > and < $currentpagenum > in the footer and I get 1-1 appears.

  To include 1-1 in the table of contents, do I have to edit the referring Page, or is there another way.

  Thank you very much for your help!

  Change the reference to the table of contents page to use the building block as well as the first page, which is <$chapnum>chapnum.<$pagenum>

• Lists numbered in the heading styles do not appear in the table of contents

  Hello world

  I used lists numbered as part of the style definition for the 4 levels of headings, for example.

  Chapter 1: INTRODUCTION

  1.1

  1.2

  1.3

  1.4

  1.4.1

  1.4.2

  one.

  b.

  c.

  d.

  When I create the table of contents, however, the numbering does not appear.

  Anyone know why this happens and if there is a workaround?

  Appreciate any advice.

  1. Go to set the styles in the menu layout, table of contents
  2. In the diolog: more Options
  3. In the paragraphs numbered section: select "Include full paragraph.
  4. Save the Style and use.

• Paragraph numbering does not appear in the table of contents

  I'm working on a book with several chapters. Within each chapter, I have heading styles that use autodial (position 1 watch 1.1, 1.2, etc.;) Heading 2 is 1.1.1 1.1.2 etc. ; Heading 3 is 1.1.1.1, 1.1.1.2, etc.). These figures show in chapters, but I can't to the appear in the generated table of contents. I tried to add < $chapnum >. < $sectionnum >. < $subsectionnum > to reference the table of contents page, but that only seems to show the chapter TOC number, rather than the chapter title is actually in. I tried auto numbering in the table of contents, but that no longer works. Is it possible to show the numbering of the chapters in the TOC?

  This is what it looks like now:

  Workshop 3: Adding redundancy in a component

  Purpose ........................................... 7 - 1

  Functional objectives... 7 - 1

  Setup .............................................. 7 - 1

  Code files for this workshop... 7 - 2

  This is how I want it to look:

  Workshop 3: Adding redundancy in a component

  7.1 Purpose ........................................... 7 - 1

  7.2 business objectives... 7 - 1

  7.3 Setup .............................................. 7 - 1

  7.4 code files of for this workshop... 7 - 2

  If anyone can help me, I would really appreciate it!

  Thank you!

  I tried to add <$chapnum>.<$sectionnum>. <$subsectionnum>to the reference TOC page,...

  You do that on reference Page Table of contents of the YourDocNameTOC.fm file,

  or in the body file?

  I just tried:

  for a title 1 with auto-numbering format from:

  <$chapnum>. \t

  and a Heading1TOC format of:

  <$paranum>. <$paratext> <$pagenum>

  on the TOC TOC RP.

  It generated a table of contents entry of:

  2.1 title text 13

  for sample 1st section on page 13 of the file declared Chap 2 and start the p13.

  I didn't even have to add <$chapnum>.

  It's FM7.1 WinXP32.

• small boxes that appear in the table of contents

  There are boxes that appear randomly in some of my titles. How can I get rid of them? and how are they there in the first place?

  Thank you.

  Ah, I see. Yes. This is indicative of the interactivity.

• How to choose half of a title to appear as title 1 in the Table of contents?

  I am creating a document containing several job descriptions and want to have a hyperlink in a Table of contents description of each individual work. The way securities are in the format looks like this: "profile Description: President. The only part of the title I want to appear in the Table of contents is '' President. '' How can I select the part of the title to post a link in the table of contents? I've highlighted the portion of the line I want to appear as the title 1 but Word (2010) insists on the selection of the entire line and not just the part that I chose to be Heading 1. I know that I could drop the word 'Président' to another line, but it's not the look I want. I think I should perhaps use a bookmark or do something with the field but am way over my head on this one. I only know some of the basics and the terms bookmark and the field are new for me and quite mysterious. Any help would be appreciated, but I am a novice and must be crossed it work with no baby.

  KathieYZ

  Ok. I assume that you do this in Word?
  If so, then the word is part of office (for which there are specific forums on this site) and no windows.
  Click on the Forums link at the top of this window, choose the desktop, and then select the version of Office you are using and choose the word.
  Post your question here.

• Blades does not name in the table of contents when published

  Users of Adobe in the morning!

  I need help, I am using Captivate 4.

  I named all the slides in my presentation so that they will appear in the Table of contents. The problem is that certain sections (even though they appear named in edit mode) show in my 20 Slide 21 Slide presentation, etc...

  It is very important for our users to be able to navigate to the section of the event during viewing / review, they do not need to attend the production in its entirety.

  As always, I am in a rush for a solution... (aren't we all)

  Thank you for taking the time to help me with this problem!

  Optimistic, but frustrated at the moment,

  Corrine

  Hello

  Have you tried to click Reset TOC tab Skin Editor/TOC?

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Possible to turn off the legacy of line break in the table of contents?

  Hello

  Say I got a long title stupidly, that I need to address (and subtitle is not an option in this case):

  Lorem ipsum dolor sit amet, adipiscing elit computer. Integer nec odio.

  Due to wide-ish the font size of the header in the document, I want to break this header in two lines.

  However my OCD uses a smaller font size, and so he could sit happily on a single line.

  The problem is that the inDesign TOC seems to be ineriting the soft breakdown and therefore the line break appears in the table of contents too.

  Is it possible to disable / prevent this?

  Thank you!

  Try to use nonbreaking spaces, or without breaks (spaces are less problematic) the part of the topic that you want to wrap instead of the line break is forced.

• How to reorder the Table of contents?

  Hi all

  In Adobe Captivate 8 I'll create a Table of contents for my introduction to e-Learning. I found the tutorial on Adobe on how to create it.  I know I can you rearrange slides easily in Captivate. My question is this. The Table of contents will revamp the as well as slides or I have to do separately?

  Thank you for your help.

  You need to just reset the TOC, there is a tiny button at the bottom which allows to reset. At least if you have best practices:

  1. to name the slides with the name that you want to appear in the table of contents
  2. the slides that you want to have a higher level and the name of the Group of groups with the name that you want to appear in the table of contents

  In addition I always recommend during training, waiting, with the creation of the table of contents, until the project is completed. Then you can do more editing in the table of contents, such as the creation of more than two levels (groups + slides will be paid the flimstrip, not more levels).

• Include graphs of the icon in the table of contents (TOC)?

  Question

  Is it possible to have icons (i.e. frameworks anchored inline) automatically appear in the table of contents?

  (We translate into 15 languages, so manually add graphics to the table of contents, after its creation isn't really a viable option).
  

  Scenario of

  In our books, we include a troubleshooting section explaining her mean different icons of warning symbol. (Kind of like engine lights check various you see in cars). It would be nice to show the actual icons in the table of contents, do I hope this a little easier to find info.

  
  

  We do not include the icons in actual positions in the book using anchored frames "Shrink Wrap", but each anchored picture is replaced with a space in the auto-generated table of contents. (This is what we want in most cases, just not this particular case).
  

  Plug

  We work in unstructured FM 11.

  Thanks in advance,

  Jason Nichols

  If you are ready to have a paragraph format separate for each variation of the icon, you may be able to use the image above each corresponding to xxxTOC tag property to its icon, using negative space Frame - over hack Arnis described lately to:

  The numbered steps circled are possible?

  This will pollute the paragraph of course catalog.

  I'm rather tempted to use a rendering of the font tool to convert your icons of character glyphs in Unicode E000-F8FF private use area *. Then, the icons are just text introduced in each topic. Note: in a position of switching character Formats breaks automatic hypertext in the table of contents. See:
  Color of the page number in the table of contents

  The problem of termination of the link could be avoided by using a Unicode open license text font which is similar to your favorite title font and adding glyphs to icon for private use. Then there is no change of character format in the relevant TOC entries. Of course, turning your icons in glyph police presume you have vector art for them which is easily converted to outlines, otherwise it will be a great effort.

  _____

  * I should avoid areas of private use A or B, because the scope on planes 15 and 16 (more than 32-bit code points).

• How can I include the header of the table of contents in the table of contents?

  I prepare a table of contents in InDesign CS3 (Macintosh OSX 10.5.8)

  I added all the paragraph styles to the list of paragraph styles, I have want to appear in my Table of contents.

  However, I would also like the table of contents itself appear in the table of contents:

  In the case of the table of contents is placed on page 3, he want it looks like this

  Table of contents:

  Title page... page 1

  Thanks... page 2

  Table of contents... .page 3

  Table of figure... page 6

  Chapter 1... page 10

  and so on...

  I have included the paragraph style in the list of paragraph styles, I want to have in my table of contents. But this does not have an entry in my table of contents that is named "table of contents".

  I would be grateful for any advice.

  Thanks in advance

  To do this add a nonprinting frame to Page 3 and add the words Table of contents using one of your styles that is picked up.

• Generate the table of contents with chapter markers?

  It has been a while since I had to install and create a table of contents for a long document of single file, but I'm sure that I created TOCs in this way in the past. Then, why the text in the Section markers will appear in the table of contents? It is even possible to generate a table of contents that contains text of article marker?

  I use InDesign CS5 in Windows. I have a file single document I'm trying to generate a table of contents for. I designed a 16-page manual in an inDesign file that includes a cover page, table of contents page and seven "chapters."

  I created a separate section for each 'chapter' and used Chapter markers in the top of the page master for chapter names. It's something I did in the past of syntactically long documents containing several chapters.

  I put the first page of each 'chapter' as a new Section on the Pages panel. In numbering and Section Options for each page, I checked the Section getting started, Automatic Page numbering, the Style of Page numbering: 1,2,3,4... and in Section marker: I put the name of 'chapter' in the text box.

  

  I've set up paragraph and character Styles and has used throughout my document. When I put in place the table of contents I created everything correctly, including a heading style that I used for all the sub lines in my file and my style of Section marker for chapter names.

  

  When I insert the table of contents, generate headers sub with their page numbers, but the titles of the chapters which are chapter markers do not generate. Am I missing something or is it still possible to enter the text of chapter markers in a table of contents? I'm sure that he's worked in the past. Can anyone offer a solution for this?

  Thank you

  Kat

  Looks like the markers section present only in the table of contents if they are on a document page. Try manually to the substitution of the frame.