Can the Apple Watch screen stay on all the time in Mode bedside table

Similar Questions

• The Milanese loop can be worn all by playing of the drum and operation etc. of hiking? (I'm a drummer) and I can wear Apple Watch in the shower?

  I'm in a band and make a lot of drums and hike as well. A lot of things on the outside where I might have to move my arm quickly or a lot. Always do

  the Milanese loop what the band for me? (I'm a guy is told by the way) and secondly I can wear Apple Watch in the shower? answers will help me to decide what the band to get when I buy a Apple Watch 42mm soon

  See this document: water on Apple Watch - Apple Support resistance

  https://support.Apple.com/en-us/HT205000

  No shower while wearing the Watch:

  Your Apple Watch is splash and water resistant, but not waterproof.

  ....

  and

  The following can affect your Apple Watch water resistance and should be avoided:

  • Do drop your Apple Watch or submit to other impacts.
  • Submerge your Apple Watch in water for long periods of time.
  • Swim or bathe with your Apple Watch.
  • Expose your Apple Watch pressurized water or water of high velocity, for example, take a shower, water skiing, wake boarding, surfing, jet skiing and so on.
  • Wear your Apple Watch in a sauna or Hammam room.

  I'm not sure of the loop of the Milanese to your needs.  It is easily adjustable and fits perfectly, but it's magnetic and I'm not sure if that may interfere with your equipment.

  My watch has the sports Strip and that is comfortable also.

• Can u put the Apple Watch mode bedside table without getting the dock?

  I Haz one question I am about to get a Apple Watch for my birthday

  question, version 1

  can u put the Apple Watch mode bedside table with the original charger, or get the dock from Apple?

  Hello

  Yes - you can put Apple Watch mode table bedside without having to buy the Apple (or other) docking station.

  To place your watch mode bedside table:

  • Make sure the option is turned on: on your iPhone, in the application of the watch, go to My Watch (tab) > General > scroll mode bedside table.
  • Connect your watch to its charger (with power connected):
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • By design, when the watch is in this mode, pushing even your bedside table may be sufficient.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support

• How we can use Apple Watch remote keynote on iPad?

  Hi all!

  I prefer to use Keynote on the iPad when I have a presentation. Can we use Apple Watch remote slides on the iPad? It is really practical if possible.  How can we do?

  Hello

  Yes - you can use Apple Watch (via the paired iPhone) as a remote to control presentations when the iPad is selected as the presentation on your iPhone device.

  To do this, use the Keynote Remote screen in Keynote for iOS:

  -L'iPad must be combined - as a presentation device - with Keynote on your iPhone.

  -Your iPhone must not be connected to an external monitor using an adapter or AirPlay.

  -You must not have a presentation open or playing in Keynote on your iPhone.

  To pair your iPad with your iPhone as a presentation device, follow the steps detailed here:

  Use Keynote Remote on your iPhone, iPad or iPod touch - Apple Support

  More information:

  Use Keynote with your Apple Watch - Apple Support

• iMac 10.11.3 continues trying to not start, no chime sound, gray with Apple logo screen, stays for about 5 to 7 minutes, then tries to start again. It was working fine earlier today.

  iMac 10.11.3 continues trying to not start, no chime sound, gray with Apple logo screen, stays for about 5 to 7 minutes, then tries to start again. It was working fine earlier today.

  It will start in recovery?

• That the face is lit mode bedside table may be shortened? He remains too bright for too long

  That the face is lit mode bedside table may be shortened? He remains too bright for too long.

  Hello

  No, it is not currently possible to customize the duration for which the screen remains lit mode bedside table.

  If you want to send feedback or feature requests to Apple, you can do so here:

  https://www.Apple.com/feedback/watch.html

• Apple Watch screen goes off in the middle of dictation

  Not all the time but enough to be annoying to my screensaver falls asleep while I'm in the middle of a dication.  When I wake it back the entire message is gone and I have to start over.  Help!

  Try the following steps:

  1. Open the Apple Watch application on your iPhone.
  2. Press the tab on my watch.
  3. Scroll and click on General.
  4. Automatic locking valve.
  5. From there, you can change the display so that it locks automatically.

  Some other actions that might be useful:

  1. Unlock your Apple Watch.
  2. Tap Settings > general > auto lock.
  3. When you are on the auto lock screen, change the display of how many minutes you want.
  4. You can also change the display to "never" so that your watch will automatically lock.

  Good luck!

• How to make Apple Watch screen to return to the normal mode

  

  I looked at my Apple Watch and noticed the content is super zooms (and I did nothing to make this way - not to play with the settings, etc.). I can barely see the content and I can't navigate to see one of the HMI. If something happened to cause the content to appear in this way, it was not intentional on my part I restarted the clock. She finds the same zoom level. I took a screenshot of the problem, but the screenshot doesn't really show what is on my screen. It shows what the screen is supposed to look like.

  I took some photos of my Apple Watch with my iPhone to help you see the problem.

  Ideas?

  Hello

  Zoom (an accessibility function) has been activated on your watch.

  To disable the Zoom on your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > accessibility > Zoom - put it off.

  It can also be enabled / disabled on your Apple Watch via settings > general > accessibility.

• What happens if someone has 2 iPhones and both of them has been incorporated into the individual Apple Watch and they are all with the same Apple ID?

  What happens is someone has 2 iPhones and both of them matched with a Apple Watch on its own and that they use the same Apple ID?

  Sharing activity is based on Apple ID? or iPhone?

  Just curious.

  Hello

  Apple Watch can only be coupled to a single at some point iPhone.

• BlackBerry Smartphones Blackberry 8330 screen stays on all the time.

  My new 8330 screen was darkening properly for a few weeks and now stays on all the time. I adjusted the timeout of several parameters and saved the settings before setting off, and nothing works. My battery is reached! Please, is - that someone has had the same problem and solved the mystery? I did a search before posting this.

  Hi Mopar and welcome to the forums!

  First Blackberry troubleshooting step:

  • Turning on the device in front of you.
  • Make sure it is not plugged into the Charger AC/DC or USB charger.
  • Turn it over and remove the battery, IF the UNIT IS TURNED ON.
  • Pop the battery back in and wait for it to automatically load upward.

  See if that helps the situation.

• My Apple Watch screen went black, how to fix this?

  MY screen Apple Watch is spent black, can it be fixed?

  Hello

  Your watch can be VoiceOver and active screen curtain. To check if this is the case and, if so, to disable:

  On your iPhone, the Apple Watch app, go to: Watch My > General > accessibility > VoiceOver > on the VoiceOver screen:

  -Disable VoiceOver.

  -Cut the screen curtain.

• Can my Apple Watch with Weight Watchers app sync

  Does anyone know if my Apple Watch can synchronize with weight watchers app?

  Hello

  Another user who has the same issue recently reported that Weight Watchers advises them:

  • "I just talk with the service the customer to weight watchers. Apple Watch and WW app sync yet and they're not sure when / if they will do it. »
  • More information: can not sync ability weight watchers app Apple Watch

  Also: the description for the application of Weight Watchers does not support synchronization to Apple Watch. It also appears to advise that sync iOS health app has been temporarily withdrawn:

  «iOS 8 + users can connect with health of Apple app to sync your data from health and fitness...» This feature will return soon with other... "We regret that a number of features have been temporarily removed, but new and better versions will soon be back."

  More information:

  https://iTunes.Apple.com/GB/app/weight-watchers/id331308914?Mt=8

  Support resources are available from Weight Watchers here:

  http://www.WeightWatchers.com/help/index.aspx?PageID=1107041

  Contact information for assistance:

  http://www.WeightWatchers.com/help/index.aspx?PageID=1022291

• How far can my Apple Watch my iphone work?

  What is the approximate maximum distance for the connection between the Apple Watch and a 6s iphone bluetooth +?

  Hello

  Normal Bluetooth range is about 10 meters/33 feet. Actual range varies in practice because of wireless interference, but you don't need necessarily to have your iPhone on or just around you (scope of arms, for example) for devices to keep their Bluetooth connection.

  Your watch may also exercise certain functions when it is not connected to your iPhone, including some that are available when your watch is connected to a known Wi - Fi network.

  When the pair iPhone is not included and your watch is not connected to the Wi - Fi, you can always:

  • Play music from a playlist synchronized on your watch.
  • Use the watch for the time, as well as alarms, stopwatches and the clock.
  • Keep track of your activity (Stand, Move, exercise) with the application of the activity.
  • Follow the workouts with the application of the workout.
  • View photos of the synced photo album.
  • Use Apple pay for shopping.

  If your watch is disconnected from your watch, but within range of a WiFi (2.4 GHz) your iPhone plugged in before, the watch can connect to this network and you can also still:

  • Send and receive messages using iMessage.
  • Send and receive digital messages Touch.
  • Use Siri.
  • Make and receive phone calls if you have calls enabled Wi - Fi (depending on your operator).

  More information:

  Use Apple Watch without her matched iPhone

• Blue screen, but can the safe boot mode

  I get the following error

  

  He then gets to my home screen, just before going to my office and then I get the blue screen:

  I am able to boot in safe mode.  I also tried boot of the last good configuration but still knowing the blue screen.

  Please help because I am stuck how to proceed!

  Hello

  Check your cables to the disk hard (on both ends) - remove and replace - do

  not only it to be tight (of course all power first deleting).

  --------------------------------------------------------------------------------------------------------

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
  https://msdn.Microsoft.com/en-us/library/ff559023%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Apple Watch series 1 (38mm) - battery drain in airplane mode

  Hello

  I've had my Apple Watch series 1 (38mm), on Friday. So far, I really like and love what I can do with it. Never thought I would do so many things with it :-)

  However, I've lived a strange behavior... To save battery, I turned today into airplane Mode while I was at work. It was just in my coat in my locker. So I use it and it has not moved for 9 hours... I left in there with battery to 90%... when I'm out, he just got 50% left... This is way too much.

  Background refresh is disabled, I just installed 2 apps... also I just the icon weather stock on my dial of the watch. Not much in the dock or the other.

  Maybe it's a bug of software? Or is my watch may be defective?

  Restarted and will need to examine more closely, when its load to 100%.

  Anything else I can do for now?

  Hello

  It can help to restart your iPhone and your watch, close open applications on your iPhone first:

  • On your iPhone, click twice on the Home button, and then drag upward on each Preview app to close.
  • Close the two devices together, and then restart your iPhone first.
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support