CAPTURE and draw: cannot transfer to the libraries

Similar Questions

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Occult video BIOS BIOS occult system and I cannot get into the bios?

  IT SAYS: System hidden BIOS Video BIOS with a shadow and I cannot get into the bios?  WHAT CAN I DO

  Hello

  Why you try to go into the BIOS (Basic Input Output System)?

  For the problem with the BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.

• date and time of transfer to the target fpga

  Hello world

  Can I transfer the date and time of real time on target fpga in a sbRIO?

  Thank you

  Hello

  You don't know why you would want to try this, can you clarify?  You cannot send the timestamp as it is, but according to what you want to do, there will be a solution.  This describes how a timestamp is stored in LabVIEW, but you probably want to send/receive something more easy to handle on FPGA.

  Michael.

• Cannot transfer to the front on engineering/r6250

  So I have a r6250 and im having trouble portforwarding. Im trying to portforward a game called magicite because it has no connection to steam support. but when I'm trying to port forward as I forwarded port my minecraft server, that it did not work and my friends could not connect. Ive tried many different things but nothing works with the port check tool. and when I went to check my minecraft server stopped allowing me to portforward it. can someone help me?

  also, I should mention that it is hung up in / runs from a motorola router

• my files and foloders cannot open because the path has been changed

  HELO

  After I got all my documents are gone b4 has my eyes, some time ago, I was not able to recover them, but I DID NOT REMOVE ALL of THEM.

  I did a search on the button start Search for files and found them there - but only the titles that I click on one of the files are a 'pop-up' box States "the element ie... Book.XLX that this shortcut refers to has been changed or moved, so this shortcut will work more properly"

  I know that they always there - I think that the path of the folders and files were changed because I have change a few things to try how it worked on my system

  I also worked my desktop shortcuts

  Can someone explain pls?

  Thank you

  M

  Hello

  You can try to activate hidden folders and check.

  Go to folder options and view records, files and hidden folders.

  For more information, you can consult the following article:

  Show hidden files

  Hope this information is useful.

• my organization has recently updated after effects CC 2015 and we cannot upgrade to the version 13.6.1

  Cloud creative does ' t show that there is an update and when I opened the tab versions it does not show after effects at all.

  is there a download link for the update!

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• Help me to library and apps cannot connect to the network

  I followed all the steps Adobe me but all my Adobe apps still encounter the same problem. One of the solutions is to enter your port number in your browser, then I got the "upgrade required" message Pls help ASAP

  

  Hi Alexl29685103,

  Please let us know if you tried the steps in the following help document to resolve the error "something went wrong initialization library of creative cloud": Solution to the issue: Adobe Creative Cloud Library Panel does not in office products.

  Let us know if that helps.

• I did the larger window and now cannot get back the tabs. Escape does not work. I downloaded again, but still just a white screen. Help

  Escape does not work.

  Did you try F11?

  Double Post.

• I want to open/read/convert files .opf and .opef, (professional vista in the new Dell Vostro 1520)

  I copied dozens of files from the old notebook in a USB key, copied in my new Dell (running Vista Business) and the file types are displayed as .opf and .opef. Vista does not recognize these types (I thought that I initially had saced them in format JPEG, MPEG, etc.). The web provides no answers, nor made of Microsoft Web sites, so this page. Why is all this so desperately complicated / I just want to USE my computer, no need to learn a lot of things that need to be automated, grrrr!

  . OPf files are associated with six programs that I know (and probably more) http://www.fileinfo.com/extension/opf and http://filext.com/file-extension/OPF. I can't anything on .opef files - I don't think that there is.  I don't have either of these types of files in the associations for file on my system Vista Business SP2 32 bit (with a lot of the image). You can check your by going to start / Control Panel / Default programs / associate program, a file or process and analysis of the list for .opf and .opef.  If you have, see what kind of program he uses to open files.  If you do not, then you have no program capable of opening files (as they are named).

  Are the files on your USB stick with their original file extensions?   They are still on the old computer?  You can try to do the process again to see if this strange event occurs again (if everything goes well, it will not and everything will be OK).  Simply copy files does not change their extenstions (even if the new machine is not the software to read the extensions, and especially not if it's the case) - but already, you know that and are looking for a solution.  I could try to change the extension of one of the files has been changed to revert to the original extension and see if you can open it with the appropriate software.  If this workd and you cannot transfer files without changing extensions the (and I don't quite understand why it is happening0 then your only choice is perhaps rename each file to give it the appropriate extension.)  Either that or try to download one of the programs in the first link of this post and see if you can open the files with .opf.  If so, you need to learn how to use this program for working with these files transferred.

  You can be infected by the malware. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials to: http://www.microsoft.com/security_essentials/default.aspx (with the same bet cautioned that you can have only ONE program AntiVirus installed and running on your system at any time).  They say that MSE has the most impact on the performance of the PC while I found Pandasoft found most of the malware.  You can decide if you want to keep your current AV program or switch to one of these other.  If you want to transfer the files, then try again.

  If this does not work (and don't try to do the scans with each of them), then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will finish without error, it could not resolve (if she has no such errors, post here or you can try to analyze them using http://support.microsoft.com/kb/928228).

  Which; s on this subject for now (it is certainly enough to keep you busy with you would rather not do things I realize - but if we want to retrieve these files must be eliminated some potential problems that can cause the problem * unless you want to change all the files one by one if dealing even works).

  Good luck and let us know how things go.  We will be there to offer more help if these solutions do not do the trick.  One way or another, we will answer your files somehow.

  Lorien - a - MCSE/MCSA/network + / A +.

• How can I transfer all the files from an iPad earlier to a new iPad pro?

  I'm considering buying an iPad pro and want to transfer all the files from my iPad generation (big connector) prior to the new.

  Is it possible directly, and is there a cable to connect the of LIGHTNING current in style making earlier?

  Or it's done via WiFi?

  You have a computer?

• How to transfer all the stuff from an old to a new iPad

  I just bought an iPad mini 4 and want to transfer all the data, etc. original iPad mini to it, and then clear the old send to my grandson

  See that TH is-> https://support.apple.com/en-us/HT201269

  and before you give it-> https://support.apple.com/en-us/HT201351

• Cannot scan to the computer. Photosmart 6510

  I have just purchase a photosmart 6510 and I cannot scan to the computer.  The printer tells me that I need to activate this via the printer software.  I know that I have installed all the software from the disc supplied.

  I can't find where I have activate the scan of the computer on my laptop.  Support information tells me to click the icon for the printer to my desktop, I do not have!  I tried going through the control panel and impossible to find something there.

  I go in the HP folder in my Start menu and click on scan HP that I get the following message "the machine HP photosmart 6510 series is not found".  I don't have a problem with printing at all.

  Tried to start printing and scanning of doctor and who did not make a difference. (In fact, the scan option came not on it).

  How can I fix this please?  I'm running Windows Vista Home premium.

  Hello.  Thanks for your reply.

  I've sorted really the problem now.  But let me explain what it was.

  I tried tool doctor who recommended you after browsing these forums, without success.  In fact, when I ran the scanner, he told me that he had no problem with printing, but there was no mention of the scanning anywhere.

  In fact, I uninstalled all HP software, removed the printer from my control panel.  Then reinstalled the software from the disc and then installed the printer again (I did things the opposite of the front walkway).  And the scanner function now works.

• Cannot communicate with the first DNS Server (169.126.63.1)

  Hello
  I have recently had problems with my internet connection and therefore cannot get on the internet at my place when it used very well. I have a wired connection usually, but tried to install a router but now even the wired connection doesn't work and I get the message "Cannot communicate with the first DNS Server (169.126.63.1)" I tried many things and even reformatted my hard drive, do a reinstall system, different setting reset and still it does not work. Hope someone can help me in this situation. Thanks to a bouquet.

  Here is my information

  Hello

  1. have you done any software or hardware changes to your computer recently?

  To work with this issue, I would say that you try the methods below to resolve this issue.

  Method 1:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2:

  
  Step 1:

  Let us reset TCP/IP and check.

  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357

  Step 2.

  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in the installation - basic configurationcategory.
  3. scroll down until you see "DHCP Server"- if it is disabled, select 'Enable'.
  4. enable DHCPif you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click ' Save Settings '.

  Step 3.

  1. click Startand then clickControl Panel.
  2. go in network and sharing Centerand then click onchange adapter settings.
  3. right click on Local area connectionand selectProperties.
  4 Select Internet Protocol Version 6 , and then clickProperties.
  5. click on get automatically a DNS server address, then pressOk.
  6 select automatically an IP address to get.
  7. repeat the steps for Internet Protocol version 4 as well.

  Also visit these links:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Hope the information is useful.

• I have a Compaq Presario V6000 Widescreen and I can't find the video driver just for this computer

  I can find the video driver for my Compaq Presario V6000 Widescreen

  Serial number: {Private Information Removed}

  There are 4 computer V6000 but I don't know which one should I use.

  I use my serial number and the model name and the PIN code and still cannot very well the video driver.  can someone tell me were fined the pilot to be used on window XP